|
|
Specifics of Passive Houses
Hortová, Michaela ; Chovancová, Jitka (referee) ; Kocourková, Gabriela (advisor)
The aim of this work is to extend understanding and knowledge of the problems of low-energy and passive houses. The theoretical part is focused on defining the characteristics of low-energy and passive houses. In practical part I analyze and compare three real houses. One of them is the passive house. This analysis is extended of assessment of the residents behavior.
|
|
|
Energy Performance Certificate Buildings with Nearly Zero Energy Consumption
Odstrčilíková, Aneta ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The bachelor's thesis deals with the evaluation of the energy performance of the residential building in Brno. The theoretical part is about solar collectors and their distribution. In the computational part, it compares the non-renewable primary energy and the total supplied primary energy for the designed variants. It analyzes the energy needs and flows of the building. In part C there are two energy performance certificate of building – for the initial state and the designed state.
|
|
|
Energy-ekonomical evaluation, and optimization, of a family house
Rodková, Daniela ; Horák, Petr (referee) ; Adam, Pavel (advisor)
The main content of this thesis is a design and an assessment of energy-saving measures with an objective of energy economical optimization of a particular family house. The theoretical part of the thesis describes problems of the energy performance of the building. The calculating part is devoted to economical and environmental assessment of two solving options with a use of a computer program which enables a monthly calculating measure. One part constitutes a design of air-conditioning systems, heating and drawing up an Energy Performance Certificates. The part of the thesis which is focused on a computer technology application deals with energy performance optimization with a use of a program which enables a daily calculating measure and making models of pictures of flowing with a use of CFD methods.
|
|
|
Energy performance certificate of residential building
Němcová, Aneta ; Horká, Lucie (referee) ; Horák, Petr (advisor)
The bachelor thesis deals with the evaluation of the energy performance of the residential building in Letovice. The theoretical part is about thermal systems, especially the district heating. In the computational part, it compares the energy needs and flows of the baseline building with the newly designed state. The result is two passes of both states inserted into part C – the PENB project.
|
|
|
Energy performance of a civic building
Kořenková, Veronika ; Horká, Lucie (referee) ; Horák, Petr (advisor)
The goal of this thesis is to process three variants of energy performance certificate of the building with different heat sources. The building is in mountain area Bílá in Frýdek-Místek region. The thesis has three parts. First part is focused on literary research of heat pumps. Second, calculation part, describes three proposed heat source solution. First heat source is heat pump, second is pellet boiler and the last one is gas condensing boiler. All three variants are evaluated from the economic and ecological perspective. Last part of the thesis contains three energy performance certificates of the examined building.
|
|
|
Optimization of the heating system operation after reconstruction
Komínek, Petr ; Reitknecht, Jiří (referee) ; Hirš, Jiří (advisor)
This master's thesis analyzes optimization of operation of the heating system after its reconstruction. For application of this theme was chosen school building in the complex of SOU and SOŠ Bosonohy. This work first analyze the object where is described the character of the building and as next examination of the building cloak by using infrared thermography and finally evaluation of the energy performance of the building before and after reconstruction using an proof of energy building performance. The aim of this work is optimization of the heating system. This topic is dealing with optimal settings heating curve for equithermic regulation and next the optimization of heating operation.
|
|
|
Building for library purposes
Pastorková, Gabriela ; Blasinski, Petr (referee) ; Horák, Petr (advisor)
The aim of the Master’s thesis is to design near-zero energy library building in Kroměříž. The thesis is divided into three parts. The first part includes the architectural and structural design of the library. The building has two storeys. The first floor contains a lecture hall, a library, and technical facilities. The second floor contains another section of the library with a study space and facilities for employees, both floors are equipped with sanitary facilities. An accessible sanitary facility is located on the first floor. The building is founded on foundation strips supporting the load-bearing wall system made of ceramic blocks and a pre-stressed concrete roof and floor structure. The roof is designed as an extensive green roof, the roof over the entrance area is a warm flat roof. In the second part, I focus on designing selected building services. Key components include air-water heat pumps for heating and cooling, mechanical ventilation with heat recovery, LED-based lighting technology, and photovoltaic panels. The heating is provided by a hot water underfloor system, and rainwater management concept is designed as well. The building is assessed in terms of daylighting, acoustics, and thermal technology, including an Energy Performance Certificate. The third part of the thesis focuses on using thermography to identify potential thermal bridges. This section also encompasses the preparation of cost estimates for various insulation options, aiming to determine the optimal insulation solution for libraries that have been surveyed using a thermal camera. The analysis is focused on identifying a more cost-effective solution that provides optimal thermal insulation and minimizes construction costs. The thesis is created using ArchiCAD, BuildingDesign, Microsoft Office and Lumion software, along with the web portal DEKSOFT.
|
|
|
Energy-efficient building kindergartens
Zumr, David ; Blasinski, Petr (referee) ; Horák, Petr (advisor)
The master project is divided into three parts. The problematic of first and second part is kindergarten building, its technical equipment and management systems. The third part deals with financial, energy and environmental comparison of different heat systems. The kindergarten is single-storey building without basement and is located in Ronov nad Doubravou, Czechia. Building is based on strip footing and structural system is masonry wall system with gable roof. Material of both load-bearing and non-bearing walls are sand-lime blocks. External walls are insulated by external thermal insulation composite system. Vertical structures are designed from wooden lattice truss. The building site contains also outdoor parking lot and a garden with a playground.
|
|
|
Energy rating of the building using the methodology Breeam
Jurča, Jaromír ; Adam, Pavel (referee) ; Horák, Petr (advisor)
The subject of diploma thesis is energy assessment of the building according to BREEAM methodology. First chapter overviews certification systems. The main part of the thesis consists of energy assessment of the building with application of BREEAM requirements. Specifically, building, its systems and interior environment analysis has been carried out, determination of heat transfer coefficients and production of energy performance certificate. Energy assessment of the building is carried out in accordance to BREEAM criteria. Third part contains analysis and evaluation of thermal comfort.
|
|
|
Polyfunctional Building
Holub, Ondřej ; Kopřivík, František (referee) ; Košíčková, Ivana (advisor)
Diploma Thesis „Polyfunctional building“. The work deals implementation project of polyfunctional building in Jihlava. Object is situated on Jihlava suburb in emerging part called „Horní Kosov“. Land is gently sloping from west to east. It continues for Buková street. The building has six floors and a basement. The basement is made from monolithic reinforced concrete. It is used as garages. Floors are made of ceramic bricks with isolation . First floor contains four commercial premises and main entry for housing part. Seventeen flats are situated from second to sixth floor. Sizes of apartments are 1+kitchen corner to 4+kitchen corner with terraces and balcony. Roofing is solved with simple flat roof. Heating will be ensured with central heating. Every apartment, commercial premises, shared premises are going to have it’s own gas boiler. Polyfunctional building is connected on a local road – Buková street, which is connected to new communication. Within multifunctional building twenty parking slots is designed at the basement. Next fourteen parking slots is designed outside.
|
guest ::
