|
|
Model for the Cable Thermal Characteristic Calculation
Starý, Zdeněk ; Drápela, Jiří (referee) ; Orságová, Jaroslava (advisor)
The result of this assignment is the Model for the Cable Thermal Characteristic Calculation. Firstly, there is a prepared overview that is focused on the essential ideas of cable technology. The following part describes the simple possibilities of passaging the heat. Secondly,the physical essence of warming cables as well as the possibility to discover the methods how to calculate the warming cables are also mentioned in this task.There is an opportunity to find the methods for calculating the warming cables as well. The model was verificationed in the conclusion of my assignment. The measurement was done and the empirical results were compared with the results that were achieved by modeling.
|
|
|
Proposal of mechatronic system with vibro-insulator
Fargač, Michal ; Březina, Tomáš (referee) ; Hadaš, Zdeněk (advisor)
The theoretical study of this thesis deals with options available for preventing the passing of vibrations on precision mechatronic system through the structure on which they are stored. The practical part consists of the design concept of vibro-insulating mechatronic system. At first there is an analysis of the unique structure in ANSYS Workbench. Next chapters describe how to connect the ADAMS and MatLab Simulink softwares for the purpose of co-simulation of dynamic systems. With this co-simulation, the carrying structure of the system is being analyzed. Finally, the concept of vibro-isolation system is designed and simulated for its response to force load.
|
|
|
Thermal box - educational model
Gregor, Tomáš ; Houfek, Martin (referee) ; Vlach, Radek (advisor)
This thesis describes the design and production of simple thermal system, which is used as education model for temperature regulation. This education model is called thermal box. Thermal box is controlled by integrated electronics, which is driven by computer I/O card MF 624 and program MATLAB Simulink.
|
|
| |
|
|
Simulation of Electromechanical System Control Structures
Petruška, Ľubomír ; Blaha, Petr (referee) ; Václavek, Pavel (advisor)
Construction of motor models is the main topic of this project. Mathematical characterization of AC machine, permanent magnet synchronous motor, separately-excited DC motor, series-wound DC motor, permanent magnet DC motor, switched reluctance motor is also described. Design of models is based on mathematical description of particular motors. Models are created in Matlab Simulink. Each model is implemented in continuous and also in discrete time variant. Selected models are implemented also on processor from Freescale 56F800E Hybrid Controller family. Each model has individual graphic user interface. Besides motor models, there is description and easy algorithm of Space Vector Modulation. Model of this method is also created. Models are build-up into a library, which can be used for simulations and tests of control structures. Results of models simulations are presented at the end of this project. Simulation of models that are implemented on processor is also made in Matlab Simulink environment and is compared to simulation of models that are implemented directly in Matlab Simulink.
|
|
|
Concept of three-phase active rectifier
Bareš, Jiří ; Pazdera, Ivo (referee) ; Huták, Petr (advisor)
This work deals with three-phase active rectifier control. In first, theoretical part it describes several control strategies with focus on voltage oriented control. For this type of control a design is worked out, and created model and its simulation is described. Second, practical part deals with realisation on microcontroller TMS320F28335, which is main processing unit of device lent by company Elcom. Therefore in this part abilities and settings of the controller along with developped control algorithm are described. Reached results of measurement are then presented and in the conclusion they are evaluated.
|
|
|
Algorithms for adaptive frequency hopping spread spectrum systems
Zunt, Tomáš ; Burda, Karel (referee) ; Pust, Radim (advisor)
This master's thesis deal the system, which use the Frequency Hopping (FH). Is explained principle those techniques and her benefits and disadvantages. Follows description techniques Adaptive Frequency Hopping (AFH) that used the Bluetooth. Follows description other method for setup hopset such as Dynamic Frequency Hopping (DFH), which used standards 802.22. 22. Is an emerging standard for Wireless Regional Area Networks (WRAN) operating on a license-exempt and non-interference basis in the spectrum allocated to TV broadcast services (between 47–910 MHz). Other method introduces the Adaptive Frequency Rolling (AFR), a particular instance of frequency hopping (FH) that enables the collocated WPANs to cooperate and avoid the self-interference. The AFR uses as input solely the observed packet error rate (PER) and it does not require any exchange of information among the collocated WPANs. The effect of the FR over a longer time interval is that the WPANs use the complete set of disposable channels in an implicit time-division and cooperative manner. Last method described in this Thesis is Dynamic Adaptive Frequency Hopping (DAFH). The basic strategy applied in DAFH is a binary search for a hopset that offers smaller PER. The set of admissible hopsets depends on the total number of available channels and the maximal level of binary divisions. Practical part of the master's thesis describes proposal model AFH, with usage of Matlab Simulink programme. In thesis are described function each blocks a their setting. Simulation parameters can change in simple graphic interface. The model is able to simulate influence of static and dynamic interference in transmission band of two communicating devices.
|
|
|
Turbo codes and their applications
Ploštica, Stanislav ; Krajsa, Ondřej (referee) ; Šilhavý, Pavel (advisor)
This Diploma thesis aims to explain the data coding using turbo codes. These codes belong to the group of error correction codes. We can reach the high efficiency using these codes. The first part describes process of encoding and decoding. There are describes parts of encoder and decoder. Principle of encoding and decoding demonstrate a simple example. The end of this part contains description of two most frequently used decoding algorithms (SOVA and MAP). The second part contains description of computer program that was made for using as teaching aid. This program was created in Matlab GUI. This program enables to browse error correction process step by step. This program contains graphic interface with many options and display results. In the third part is described program created in Matlab Simulink that was implemented into the TMS320C6713 kit and there is description of measuring procedure. For verification of efficiency of turbo codes was measured any parameters. Some of these parameters are: number of decoding iterations, generating polynoms and using of puncturing. The last part contains measured value and result evaluation.
|
|
|
Permanent magnet synchronous generator with active rectifier
Michaliczek, Jan ; Cipín, Radoslav (referee) ; Vítek, Ondřej (advisor)
The main objective of the master`s thesis was to prove, if permanent magnet synchronous generator made by company JULI Motorenwerk s.r.o. could reach higher maximum active power with active rectifier than with six-pulse bridge rectifier. For this reason a mathematical model was made in Matlab/Simulink. The influence of the rectifiers with various kinds of loading was observed and compared by simulations on output variables, like line-to-line voltage and active power. The simulations were also compared with measurement.
|
|
|
WLAN and Bluetooth Systems Coexistence
Mikulka, Jan ; Hanus, Stanislav (advisor)
The dissertation thesis deals with a WLAN and Bluetooth systems coexistence. A Bluetooth standard works in an unlicensed frequency band 2,402 – 2,480 GHz. This frequency band is also used by an IEEE 802.11b/g standard (Wi-Fi) which is the most extended representative of WLAN networks. Because Bluetooth and Wi-Fi systems operate in the same frequency band, a mutual signal degradation may appear, when devices are collocated in the same area. In the first part of the dissertation thesis there is a brief summary of 2,402 - 2,480 GHz frequency band regulations and its usage. There are described physical layers of Bluetooth and IEEE 802.11b/g standards and techniques used for a collision avoidance. The main part of the dissertation thesis deals with a development of a new Matlab Simulink model for investigations of the Bluetooth and Wi-Fi standards coexistence. Physical layer models and results of the coexistence simulations are verified by a measurement in real conditions with a help of a modern vector signal analyzer. The results are presented in a graphical form and a brief summary is attached at the end of each chapter. Corresponding tables of simulated and measured values are available in the enclosed CD.
|
guest ::
