|
|
Glare evaluation of exterior lighting systems
Rampák, Dominik ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
Glare is an important, but often overlooked parameter in lighting systems design. This parameter can significantly affect human biorhythm, causing a discomfort or in the worst cases it can dazzle drivers, which can lead to car accidents. Therefore, it´s necessary for lighting designers to consider glare in their designs, specifically threshold increment value. This thesis focuses on glare measurement caused by exterior lighting systems and comparison of usage different types of camera lens for threshold increment measurements with luminance analyser. For a better understanding of the whole issue, there is a part describing how human eye perceives light, which is followed by definition and division of the glare. Afterwards, there is part describing calculation procedure of the threshold increment, which serves as a basis for the practical part of the thesis. Practical part of the thesis is dedicated to experimental measurement of glare from exterior lighting system on Technická street, right behind VUT FEKT T12 building. The measurement is done using luminance analyser and the LumiDISP program, while 3 lenses are used for the measurements. The output of this thesis are values of threshold increment obtained by using 4 different methods (3 lenses) and subsequent comparison of the suitability of the lenses for the glare measurements. To supplement, a simulation of the measured lighting system in the Relux program and a subsequent comparison of the results with the measured values are performed.
|
|
|
Reverse calculation of the luminous intensity curves of street lighting luminaires
Knápková, Dagmar ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
This master´s thesis deals with the reverse calculation of luminous curves for roads according to ČSN EN 13201. The thesis is divided into the theoretical and the practical part. The theoretical part describes the basic requirements and procedures for calculating the luminous curves. The practical part describes the program, created in the Matlab environment, which is designed for the practical calculation of the ideal luminous curve, for each situation given by the user. Further particular example of the calculation is given.
|
|
|
Let There Be Light? Impact of Light Pollution on the Environment
Svoboda, Lukáš ; Mihai, Hana (referee) ; Ellederová, Eva (advisor)
Světelné znečištění patří mezi mnoho druhů znečištění, které ohrožují naši planetu. Důvod jeho vzniku je vedlejší efekt průmyslové civilizace a jeho negativní dopad ohrožuje lidské zdraví, zvěř, rostlinstvo a klima. Cílem této bakalářské práce je vymezit koncept světelného znečištění, popsat způsoby měření a negativní dopady. Teoretická část bakalářské práce se zabývá definováním pojmu světelného znečištění a popisuje způsoby, jakými se světelné znečištění projevuje. Dále řeší možnosti měření světelného znečištění, a také diskutuje negativními dopady na lidské zdraví, přírodu, ekonomiku, bezpečnost a astronomii. Navazující kapitola popisuje parametry běžně užívaných světelných zdrojů pro veřejné osvětlení, a nakonec jsou probírány základní praktiky, které napomáhají snížit světelné znečištění a jsou doplněny příklady správně navrženými svítidly pro venkovní osvětlení. Praktická část této bakalářské práce se zabývá kvantitativním výzkumem, který měl za cíl objasnit úroveň povědomí o světelném znečištění mezi širokou veřejností. Data pro tento výzkum byla shromážděna pomocí dotazníkového šetření.
|
|
|
High-intensity strobe light source
Rehák, Ondrej ; Drexler, Petr (referee) ; Szabó, Zoltán (advisor)
This bachelor’s thesis discusses influence of high-intensity light strobes on human. Content of this thesis contain description of human sight and reaction of human sight to high-intense light strobes and consequently using this information to create device for temporal disable or disorientate of attacker. High-intensity light strobe source was designed to be light-weighted and compact. The case was designed and made on 3D printer, device is powered by lithium-polymer battery.
|
|
|
Effect of laser attacks on pilots work
Rind, Pavel ; Kadlec, Ota (referee) ; Chlebek, Jiří (advisor)
In recent years a number of cases of flight crew illumination by laser beam have been reported. Such events are considered dangerous for flight safety and for aviator´s health. If a human eye is illuminated by laser beam of high intensity such event can lead to temporary or permanent eye damage.
|
|
|
Evaluation of Lighting Quality Using Modern Software Tools
Fazekas, Tibor ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
This thesis deals with the evaluation of the quality of lighting with the usage of the latest software products used nowadays. The first part of the work is about indoor lighting, the basic requirements invested in lighting, and the basic concepts of indoor lighting. The second part includes complete search for today's computer implements for projecting, simulating, calculation and analysis of light, their functions and characteristics, including luminance analyzers based on CCD sensors and their software equipment. The last part of the work has the task to model a computer room using softwares which can be found within the territory of VUT Brno, and the task was to assess its lighting. Following this, with the help of luminance analyzer, the task is to capture the scene under different lighting conditions and to evaluate the measured data.
|
guest ::
