|
|
Multifunctional building
Mikudík, Patrik ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of the diploma thesis is to elaborate the project documentation of a newbuilt multifunctional building in Považská Bystrica. The multifunkcional building is designed as a three-storey without basemen. In the first ground floor there are dental and gynecological surgeries with facilites, a cafe and director's office. In the second there are office spaces with facilities for rent. On the level of the third floor there are two-rooms flats and one four-room flat, while there are also storage spaces for each of the flats. The building of the multifunctional house is based on reinforced concrete foundations. The vertical construction system consist of reinforced concrete perimeter walls and perimeter reinforced concrete columns in combination with an internal load-bearing walls of the reinforcing core of the building. The partition walls are designed as a plasterboard walls. The horizontal load-bearing structures are made of reinforced concrete prestressed panels. The roofing of the building is designed as a flat one-layer roof. The roof of the terrace consist of an extensive vegetation flat one-layer roof. The roofing of the awning at the main entrance to the building is design as a reinforced concrete monolithic console with one-layer flat roof a skylight. The building is insulated with the external thermal insulation composite system (ETICS). The façade of the communication core of the building is made of brick cladding. The rest of the façade is made of a thin layer white plaster.
|
|
|
Administrative building Brno Hlinky, implementation of facade and roof cladding
Dušková, Lucie ; Liška, Pavel (referee) ; Kovářová, Barbora (advisor)
The subject of this Bachelor thesis is offering solution of technological steps roofing and cladding of an office building in Brno, Hlinky. It is a two storey building, partial basement, the overall module dimensions 9.4 x 37.5 m. Main supporting skeleton consists of roof trusses and ceiling beams that are attached to poles. The roof is purlin, load-bearing layer is trapezoidal sheet, which is on the top flange purlins. The walls are self-supporting, walled. Roof cladding is insulated with layer of polystyrene, the main waterproofing layer is mPVC film. Most of the cladding is designed as external thermal insulation composite systems with ceramic tiles, part of the facade on the west side of the building is made up of wood paneling with an air gap.
|
|
|
New building for habitation with tooth surgery in Červený Kostelec
Junková, Pavlína ; Horálek, Jiří (referee) ; Benešová, Romana (advisor)
In the bachelor´s thesis there is designed new building for habitation with tooth surgery. House is located in the town of Cerveny Kostelec, street Lánská on plot No 1007/14. The building has two floors, has not a basement and has flat roof. The building is designed by Heluz system, whole house is insulated with external thermal insulation composite system. In the first floor there is tooth surgery and living area. In the second floor there is only living area. The right side is connected to the building garage. The project itself is processed in ArchiCAD 14.
|
|
|
Library
Vaňková, Jana ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
Diploma thesis addresses the implementation and design of the new library object. The proposed building will serve as public city library with the possession of 102 200 book units. The building will offer department for adults as well as kids section, technical literature, an audiovisual collection, computer rooms and study rooms, reading rooms. There are also plenty of chill zones. In the building are additional services as coffee shop, gallery and lecture hall for different kinds of events and purposes. Library has three floors and one basement solved as an underground parking lot. The building is roofed by warm flat roof. The structural system is reinforced concrete skeletal system with glass facade system, the external wall in some places as sanitary facilities, secondary staircase and coffee shop is walled with bricks with an external thermal insulation composite system. The ground plan of the library is square with dimensions 35, 45 x 35, 45 meters. The building is located in the city centre of Písek, surrounding terrain is slightly sloping. The solved area contains newly designed asphalt road, which leads to the underground parking lot.
|
|
|
Apartment building on a sloped site
Hudec, Karel ; Bečkovská, Tereza (referee) ; Bečkovský, David (advisor)
Subject of master´s thesis is an apartment building in Uhersky Brod. Subject is designed on a sloped site in central urban area of the city. Apartments are placed on three floors above the ground level, in underground floor is situated a garage. Vertical load-bearing structures in lower floors are made of monolithic reinforced concrete, upper floors are made of ceramic blocks HELUZ. Whole building is insulated with external thermal insulation composite system. Horizontal structures are made of monolithic reinforced concrete. Roof is partly mono-pitched, partly double-pitched truss roof.
|
|
|
Apartment building
Sikora, Michal ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The aim of bachelor´s thesis is the elaboration of a construction project documentation of an apartment building, located in Jablunkov. It is a detached, three-storey building with a basement. Ground, first and second floor are used for living. Three of the six apartments are designed as barrier-free. Basement contains mechanical rooms and a cellar for each apartment. Ceiling is designed as reinforced concrete construction, walls are made of Porotherm bricks and roofing is designed as single ply flat roof.
|
|
|
Wellness Hotel
Kašpárová, Darina ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The subject of the diploma thesis is to elaborate the project documentation of a newbuilt wellness hotel located in the village of Lipno nad Vltavou. The building is designed as a non-basement one with three floors. It is visually divided into several parts. On the first floor there are two operational parts – a wellness and a restaurant. On the second and third floor there are small apartments for temporary guests' accommodation. The building foundations are made of concrete and reinforced concrete. The load-bearing structure is made of aerated concrete blocks and sand-lime blocks. The ceiling structures are made of cast-in-place reinforced concrete. The roof of the first floor is designed as a one-layer flat extensive green roof. The roofing of a main reception is designed by a sloping roof and the third floor as three adjoining sloping roofs. These roofs are formed by a system of aerated concrete roof panels and a water-dissipating layer of folded sheet metal. The building is insulated with an external thermal insulation composite system (ETICS). The part of the facade consist of facade cladding strips and part of the render of light color.
|
|
|
Mountain hotel
Vandrovec, Aleš ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
Master’s thesis theme is mountain hotel project. The hotel has one lower basement and four aboveground floor. It has trditional look and the roof is double-pitched. Floor projection looks like letter "L". Main part has measurements 25,3 x 14,1 m and it has four floor. Extension is on northwest side of main part. It has measuremnts 11,85 x 9,5 m and three floor. Facede of basement and first floor is from stone facing mansory. Facade od second floor of main patr of buildings id timbered looks like curb. Third and fourth floor are attic, gable is vertical timbered. Facade of second floor of extension is plaster on ETICS. The gable od extension is vertical timbered. Roof covering is alpen shingle from larch wood. Foundations of house are shallow. The construction system is walled. The lower basement is built from masonry BS Klatovy BD30 and other wall are from masonry Porotherm . Floor structures are from monolithic reinforced concrete, thickness 220 mm. House stairs are prefabricated double-flight. Partition wall are mostly built from mansory Porotherm 11,5 P+D. Lintols above windows and doors in facadeare made by reverse of floor slab and inside of disposition are made by ceramics lintols Porotherm. Floor structures are floating with impact insulation in whole house. In living rooms wear layers are from oak parquet block and in common rooms, toilets, bathrooms and technical rooms is ceramics paving. Wall’s surfaces are made from patent plaster and in lower basement are made from two-coat work with white coat. Toilets and bathrooms are tilled with ceramic tiles. All distributions of building equipment are covered with gypsum plasterboard ceiling. All windows and doors in facade are made by wooden profile Solid comfort SC78 and glazed by triple glazing unit (Uw,max=0,9 W/m2.K), exception is main entrance door, It is made by aluminum profile and it is automatically opened.
|
|
|
Boarding House in Strážnice
Ježek, Martin ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
Diploma thesis solves proposal of the boarding house in Strážnice. The building is situated in the western part of Strážnice near the boat dock. Access to the pension is from the main road or on the cycling path leading along the city river. The boarding house is designed on a bed of 50 people with the possibility of a restaurant for port visitors and the public. The building has a parking space and terrace. The boarding house is two-storey with hipped roof. In the 1st floor is a restaurant with kitchen, reception with facilities for staff and smaller rooms for guests. The second floor consists of apartments and rooms. The building is brick with monolithic ceiling construction. The roof structure consists of trusses. Integral part of the landscaping with small architecture. The façade finish consists of ceramic brick cladding, scratched plaster with wooden accessories that fit into the surrounding landscape.
|
|
|
Family house with an establishment
Lauková, Alžbeta ; Horáčková, Michaela (referee) ; Daněk, Lukáš (advisor)
The aim of the project is a new building of a family house with an establishment in the cadastral area Kníničky, South Moravian Region. It is designed for a family of four or five members. The building is without basement and it has two aboveground floors. A part of the first floor consists of veterinary clinic. The building is designed mainly by wall system of Porotherm. There is an aisle roof and a flat roof. The cladding is designed as an external thermal insulation composite system or as a ventilated facade.
|
guest ::
