|
|
Diagnostics and Maintenance Design
Černoch, Adam ; Pohanka, Martin (referee) ; Kudrna, Jan (advisor)
In the text is given entry of visual inspection about implementation of the selected section in city of Luhačovice. Into forms were plotted failures of the road, determinated their lenght and surfaces. The following describes the evaluation and the cause of failure. After that is given the design and repair of the road. In the theoretical part is written the classification of failures according to TP 82 „Catalogue of flexible pavement failures“. From the cataloque I chose and mentioned important failures that are manifested in diagnosis section. Finally, describes the principles of planning and design of maintenance or repair.
|
|
|
Optimization Of Methodology For Durability Assessment Of Steel Pylons
Čada, Pavel ; Ing. Miroslav. Brodňan, Ph.D. (referee) ; Chobola, Zdeněk (referee) ; Švehla,, Vladimír (referee) ; Vaněrek, Jan (advisor)
In this thesis the corrosion resistance of two types of steel materials were evaluated, Corten A as a representative of WS (weathering steel) and the corrosion resistance of anti-corrosion protection formed by the zinc coating. The different kinetics of corrosive processes was found during the NSS test. WS steel exposed to 400 hours of NSS laboratory test showed growth of the corrosion rate, however, after this period of time there has been a significant decline in this rate. Conversely, when using Zn as anodic protection, the corrosion losses decrease linear up to 300 hours of exposure, but after this time there was a relatively significant linear increase in corrosion rate. During measurements on existing VHV pylons they were measured corrosion decreases of steel and Zn anti-corrosion protection. Normal corrosion rate for weathering steel with 10 m.a-1 and for Zn corrosion loss 1.8 m.a-1 were found. Technical and economic assessment were evaluated using variant of new poles with Zn surface layer and revitalization of existing pylons from WS steel. With regard to all aspects obtained from laboratory tests and economic assessments, friendlier version of revitalization of existing VHV pylons from WS steel using a sufficient corrosion resistance of these steels were found out.
|
|
|
Life cycle of wooden structures
Pavlíková, Šárka ; Aigel, Petr (referee) ; Výskala, Miloslav (advisor)
This thesis deals with comparing the costs of construction of the timber and classical walling system throughout their life cycle. The first part introduces the history of timber, wood as a building material, processing of wood for building purposes, construction of wooden buildings, durability, removal and recycling of wooden buildings. The second part evaluates the cost of building a family house from both types of material and also cost of living in both buildings since their creation until their licvidation.
|
|
|
Design of concrete structures with FRP reinforcement
Januš, Ondřej ; Girgle, František (referee) ; Štěpánek, Petr (advisor)
The diploma thesis presents design of construction with FRP reinforcement. Including design process of cross-section with FRP reinforcement exposed to bending moment and shear force at ultimate limite state according to given standards and guidelines. Long term physical and mechanical properties of FRPs are taking into account. There are also compared load capacities of cross-section exposed to combination of bending moment and axial force, which were designed according to mentioned standards. In another part of diploma thesis there is a design of construction (precast gatehouse) with FRP reinforcement and steel reinforcement with ordinary and lightweight concerete.
|
|
|
The development of ultra-high strength (UHPC) and reactive powder (RPC) composites
Rundt, Lukáš ; Hela,, Vlastimil (referee) ; Hela, Rudolf (advisor)
Bachelor’s thesis studies ultra-high strength concrete and reactive powder composites. In theoretical part there are researched and described properties of raw materials used for their production, mainly additions. Design methodology, processing and types of curing are also studied. Psychical mechanic and durability properties of fresh and hardened concrete are described. In practical part 4 mixtures were designed and prepared and their rheological properties, strengths after 7 and 90 days in case of UHPC and strengths after 7, 28 and 60 days in case of RPC were tested.
|
|
|
Possibilities for testing and improving the durability of aerated concrete
Klaudová, Dana ; Voves, Jiří (referee) ; Hubáček, Adam (advisor)
This master´s thesis studies qualities of aerated concretes, is monitoring influenece concrete composition, quantity of aerating admixture and plasticized admixture on the durability of concrete. It is monitored especially air flow and his influence on durability on concrete. In theoretical part are explained mechanisms of damage concrete, phenomena, which influence compressive strength of concrete and then there are the results of resistance against the influence of chemical defrosting substances. In experimental work were designed, mixed and tested recipe of concerete. We investigated different atribute, especially resistance of the chemical defrosting and air flow in hardened concrete. The result of master´s thesis is effect of flow air in concrete on the durability.
|
|
| |
|
|
Economical analysis of a cutting tool
Bilavčík, Jaromír ; Humár, Anton (referee) ; Prokop, Jaroslav (advisor)
Bachelor's thesis on ”Economic analysis of cutting tools“ is devoted to economic analysis the costs of acquisition and use of different types of cutting tools, whose use has a significant influence on the economy of production and, inter alia with the costs related to the quality of the final product. Analysis of the applicability of utility properties of instruments that are used in the mechanical machining was analyzed economically advantageous for the company. This criterion must take account of the company when the production technology. Another decision-making criteria should be the final product quality. For firms pursuing the cost of quality throughout the production cycle is of course due to classical periodic sharpening cutting tools - knives, it is preferable to use instruments with tip.
|
|
|
Influence of coatings on durability of cutting inserts during longitudinal turning
Balíček, Martin ; Sámelová, Vendula (referee) ; Jaroš, Aleš (advisor)
This thesis deals with the influence of deposited coatings for durability and tool wear during longitudinal turning of steel CSN 41 1600 (E335) and influence of wear and surface quality. The theoretical part is focused on characteristics of turning technology, application, manufacturing and methods of coating cemented carbide and tool wear. The experimental part of the thesis includes the evaluation of the measured values, a description of the material, used tools and machine tool. The values measured in the experiment imply that the most suitable of the tested tool inserts is WNMG 3-1-NF with applied coating TiAlN + TiN. Surface quality decreases with increasing wear of the tool.
|
|
| |
guest ::
