|
|
Bridge on a highway
Knotek, Jan ; Nečas, Radim (referee) ; Panáček, Josef (advisor)
Subject of this bachelor’s thesis is design of new slab bridge construction over the II/464 road between the villages Příbor and Bílovec. The bridge converts highway D47. Thesis includes three studies. Pre-stressed rectangular cross-section slab with elliptical exterior trim, pre-stressed plate- grinder construction and construction of prefabricated beams and monolithic slab. For next assessment was chosen option no.1. Load effects calculation is solved in SCIA engineer 16.1. Design and assessment of the structure are made according to valid standards and regulations.
|
|
|
Design of the slab bridge
Strouhalová, Petra ; Krejčík, Vladimír (referee) ; Klusáček, Ladislav (advisor)
This thesis deals with design and solution of road slab bridge structure. Draft prestressing force is processed using the load balancing, the thickness of the slab is consedered in five variants. The aim of this thesis is to determine which option is appropriate for prestressing and which not and subsequently one selected variant design.
|
|
|
The bridge over a local brook and relocation of a road
Matuška, Petr ; Zlatuška, Karel (referee) ; Nečas, Radim (advisor)
The aim of this thesis is safe and economical design of a single span bridge over a local brook and relocated cart track in compliance with all valid regulations and standards. Three variants of possible solution were designed from which the one with prestressed concrete trapezoidal slab is preffered. The thesis is mainly focused on the static analysis of the structure and its design documentation.
|
|
|
Slab bridge in Budišov nad Budišovkou
Ilčík, Jakub ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
Subject of this bachelor´s thesis is design of new slab bridge construction in Budišov nad Budišovkou according to EN 1992-1-1. The bridge carries traffic across river Budišovka. It is full trapezoidal at cross-section area. Statically the construction is designed as point-supported slab with span lenght 12,0m. Cathegory of communication is S7,5. Internal forces are calculated by SCIA Engineer 15.3. Load of effects calculation and assesment of ultimate limit state and serviceability limit state is done according to valid standarts. Comparison of design with reinforcement in pressure zone.
|
|
|
Prestressed slab bridge over the Krupá river
Nečasová, Pavla ; Nečas, Radim (referee) ; Koláček, Jan (advisor)
Bachelor thesis deals with the design and assessment of the main structure of the bridge in the village Staré Město. It leads a local road 44646 over the river Krupá. The thesis contains three designs of the construction. One design was choosen for detail solution (prestressed slab bridge). The thesis includes statical analysis, drawing documentation and visualization.
|
|
|
Reconstruction of a beam bridge
Otevřel, Rostislav ; Klusáček,, Ladislav (referee) ; Nečas, Radim (advisor)
The work deals with the calculation of current carrying capacity of the bridge girder structure according to ČSN 73 6222 and the proposal for a new bridge. The bridge is used to transfer local roads across the river Svratka. The bridge is designed as a plate full cross-section, simply placed with a length of 13,174 m. The communication category is S 7.5. Loads and assessment are done according to Eurocode.
|
|
|
Design of a slab bridge
Strachoň, Martin ; Nováček, Jan (referee) ; Nečas, Radim (advisor)
This thesis deals with the design and solution of a slab bridge structure. In first chapter are presented two options of bridge and one them is selected to next counting. The aim of this work was to design and evaluate the structure on the basis of ultimate limit states and serviceability limit states according to applicable EN standards.
|
|
|
Design of the bridge over the river
Býčková, Klára ; Rušar, Jaromír (referee) ; Klusáček, Ladislav (advisor)
The aim is to propose solutions to the new bridge construction due to its unsatisfactory compared to the existing bridge reconstruction project . There are three studies bridging and selected variant trapezoidal plate further processed static opinion. The design was judged by the ultimate limit states and usability. Partial assessments were made for the anchoring system, anchorage area , unravels notched bars and store design to support .
|
|
|
Design of the bridge structure across the street
Váša, Jiří ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The diploma thesis deals with the design of the motorway bridge over the II / 464 road between Butovice-Bílovec. For the bridging design four variants were made, from which a variant of the slab with longitudinal extensions was selected for further processing. The design assessment was performed for the ultimate limit state and serviceability limit state according to valid standards. Determination of internal forces was performed on the model developed in Scia Engineer 18.0.
|
|
|
Bridge over the Branná river
Holuša, Adam ; Pěkník, Robin (referee) ; Panáček, Josef (advisor)
Bachelor’s thesis deals with a design of a new bridge construction over Branná river nearby Jindřichov. Bridge is located on road II/369 at kilometer 21,113. Bridge evidence number is 369-020. Thesis includes three studies. First study is post-tensioned slab constructions. Second study is construction made of prefabricated beams T93. Third study is designed with two post-tensioned girders. For next assessment was chosen post-tensioned slab construction 18,14 meters long. Load effect calculation is solved in Scia Engineer 15.3. Software calculation is compared with manual calculation.
|
guest ::
