|
| |
|
| |
|
|
The Material Selection for Bicycle Frames
Šály, Peter ; Petrenec, Martin (referee) ; Němec, Karel (advisor)
Bachelor's thesis summarises basic information about materials that are used for production of bicykle's frames. It concerns not only with common materials that are the most used nowadays, thus aluminium alloys and composite materials – carbon in the concrete, but it also pointed on the other, alternative materials. It also explains specific terms that relate to concrete materials or to their technological treating. Each material has listed characteristic which is objective thus measurable and it results from physical-chemical's properties and treating possibilities of concrete materials. It conveys assumption of frame behaviour made from this material. Subjective characteristic is also listed and it results from practice – from the feelings by real ride. Comparison of these two approaches resulted in conclusion which may help in choosing material for bicykle's frame which we have specific requirements on. Next thesis concerns with usage of concrete materials by various producers whether world producers or national ones, with orientation on brands which are interesting because of their treating of unusual materials or they are interesting because of their specific treating of common materials. There is a brief review of most used materials for concrete types of bicycle's frames at the end of the thesis.
|
|
|
Phase Transformations during Heat Treatment of Fe - C Materials
Škvarka, Jakub ; Pacal, Bohumil (referee) ; Molliková, Eva (advisor)
The goal of this thesis is a study of heat treatment of iron-carbon alloys from a physical angle. Characteristics of main components from this system and their modifications are described there. There is also described what is going on during heat treatment especially from an angle of thermodynamics and kinetics, thanks to available information from literature. The knowledge is applied on specific types of heat treatment of material and processes which can follow it.
|
|
|
Infuence of Technological Parameters on Electrochemical Properties of Negative Electrode in Lithium-ion Cell
Kaňa, Michal ; Máca, Josef (referee) ; Libich, Jiří (advisor)
This diploma thesis deals with lithium-ion batteries. It is focused on negative electrode on grafit based. The goal of this thesis is to show the problematics of lithium-ion batteries together with possibilities for improvement of their basic parametres as capacity and current elektricity loadability. The first part is focused on the description of functionality of lithiumion battery. The second part is practical and it is focused on production of negative electrodes from natural graphite 280H which has different thickness and compression pressure. The third part describes preparation of negative electrodes from natural graphite 280H and also includes results of measurement. In the last part are different types of negative electrodes from natural graphite 280H compared and evaluated including the determination of conclusions. This comparison and evaluation based on obtained data.
|
|
|
Desing of the carbon cap for the bike's fork
Gallo, Dominik ; Skřivánková, Vendula (referee) ; Košťál, David (advisor)
This bachelor's thesis discusses problems and solutions of design of the carbon crown for the bike's fork. It shows an overview of the possible implementation of the initial design up to final part. The output will be the crown made of carbon composite by mould pressing. For manufacturing the prototype form will be used 3D printing – Fused Deposition Modeling.
|
|
|
New trends and material usage in bicycle frame design
Jelínek, Vladimír ; Němec, Karel (referee) ; Juliš, Martin (advisor)
Thesis in its first part summarizes the evolution of the bicycle from the draisine to the low wheels with a focus on the material of the frame of the bicycle. Also discussed in this section is an overview of small structural modifications, which were gradually used on a bike, like Bowden brake or the first type of transmission system. In the second part, the thesis describes the operating principles and types of suspension forks and disc brakes. Mentioned are materials that are currently used for bike frames with a focus on the advantages and disadvantages of each material used and its future anticipated use.
|
|
|
Polarity of teaching
Bobáková, Natália ; Hosnedlová, Klára (referee) ; Klodová, Lenka (advisor)
The diploma thesis deals with the interconnection between medium of collective action, sport and painting. Using yoga lectures taking place every wednesday in studio of evening drawing autor observed roles of teacher, student and their interconnections. The documetation reamined on the canvas. Every lecture was different. Every canvas was different.
|
|
|
Carbon Based Materials
Hrazdíra, Matěj ; Čelko, Ladislav (referee) ; Klakurková, Lenka (advisor)
The proposed bachelor thesis deals with carbon based materials. First of all, an overview of its allotropic modifications including newly discovered forms, conditions of their existence and also their basic properties is shown. Further the extraction of carbon materials is briefly introduced. In the next chapters, forms of carbon are classified and particularly described individually with respect to manufacturing technologies and further applications. Individual chapters are dedicated to synthetic carbon and graphite, carbon fibers and carbon fiber reinforced composites. Manufacturing processes of synthetic carbon and graphite, involving possible precursors, are described in detail together with their use in various engineering applications. The following part is dedicated to carbon fibers, in particular to the manufacturing process based on the precursor used including surface treatment and sizing. Additionally the use of virgin carbon fibers is also described. The last part is focused on carbon fiber reinforced composites. Firstly possible distributions of carbon fibers in a matrix are described. Then the technology of manufacturing, properties and use of single composites according to the matrix material are expounded.
|
|
| |
guest ::
