|
|
Flexible textile-integrated coils for inductive energy transfer
Konečný, František ; Cupal, Miroslav (referee) ; Raida, Zbyněk (advisor)
This work aims to describe the design of flexible textile coils in several variants (different coil dimensions, different designs). The parameters of the designed coils will be verified using simplified simulation models and compared with theoretical calculations. Further, the work deals with the practical design of coils, including the measurement of their basic parameters and determination the efficiency of inductive power transfer.
|
|
|
Design of adjustable fully-differential filters with current active elements
Polášek, Lubomír ; Koton, Jaroslav (referee) ; Jeřábek, Jan (advisor)
The master thesis deals with design of the fully differential frequency filters working in the current mode and is focused on possibilities of the natural frequency and the quality factor adjustment. At the beginning, there is a brief description of frequency filters and active elements (MO-CF, FD-CF and DACA), which are used in the thesis. Furthermore, simplified signal flow graphs design method and transformation of passive and active elements to the differential structures are described. The designs of four differential circuitries which provide possibility of tuning the natural frequency or quality factor by the gain of the DACA element are shown in the thesis. Simulation results made in OrCAD program with help of third-order models are included. The practical implementation of the differential frequency filter for tuning of the natural frequency by the DACA elements is shown in the last chapter.
|
|
|
Frequency filters with difference current amplifier
Jirounek, Matěj ; Lattenberg, Ivo (referee) ; Vrba, Kamil (advisor)
This master´s thesis deals with the differential filters working in the current mode. It is dealt with the design methodologies of these filters and conversion circuits from voltage to current mode. Own work deals with 4 types of differential participation of structures. In this work there has been used programs SNAP and OrCAD. These programs were used for simulations of filters to proposed proper design. Results from this thesis is showed by graphs.
|
|
|
Flexible textile-integrated coils for inductive energy transfer
Konečný, František ; Cupal, Miroslav (referee) ; Raida, Zbyněk (advisor)
This work aims to describe the design of flexible textile coils in several variants (different coil dimensions, different designs). The parameters of the designed coils will be verified using simplified simulation models and compared with theoretical calculations. Further, the work deals with the practical design of coils, including the measurement of their basic parameters and determination the efficiency of inductive power transfer.
|
|
|
Design and implementation of wireless charging for embedded systems
Bednařík, Josef ; Bastl, Michal (referee) ; Krejsa, Jiří (advisor)
This thesis deals with the design and realization of wireless power charging circuit for embedded systems. The research section focuses on the various ways and technologies used in applications of wireless power transfer. The theoretical part also briefly characterizes resonant inductive coupling and critical parameters of the transfer. This is followed by realization of various variants of transfer coils and electromagnetic oscillators. Wireless power charging prototype system is created and used for testing purposes to find optimal configuration of resonator. The hardware unit presented in the final part of the thesis exploits microcontroller and implemented software is extended by foreign object detection algorithm along with method to monitor battery charging state.
|
|
|
Design of electronically reconfigurable filtering structures with modern active elements
Prát, Marek ; Kubánek, David (referee) ; Langhammer, Lukáš (advisor)
The aim of master's thesis was design of electronically reconfigurable filters. Adjustability of pole frequency or quality factor is possible. First part of thesis deals with theoretical analysis of filters, their operation modes, design of frequency filters using Signal-Flow graph method and parasitic analysis. The next part describes active elements used in thesis. In a third part, three reconfigurable filters are described and designed and their simulations and parasitic analysis are made. Last part deals with filter design in EAGLE and experimental measurement.
|
|
|
Design of frequency filters with non-traditional transconductance elements
Gajdoš, Adam ; Vrba, Kamil (referee) ; Jeřábek, Jan (advisor)
The aim of Bachelor’s thesis was to study, design and practically realize controllable frequency filters, working in the current mode, using non-traditional active elements, containing a combination of transconductance amplifiers with current conveyors. Thesis deals in the theoretical part with the basic division of frequency filters, operating modes of circuits and design method of signal flow graphs, which are used for design of the circuits in the practical part. The next section describes all the active elements that are used for circuits realization. In the practical part five circuits are designed with the element VDCC and one circuit with CCTA. Simulation is performed on all circuits using a previously defined model of the real UCC. Last part of thesis describes the design of the PCB and the results of experimental measurements for chosen circuit.
|
|
|
Laboratory device involving the high selectivity filters
Tuhý, Luboš ; Kovář, Jan (referee) ; Petržela, Jiří (advisor)
This project deals with the frequency filters of high selectivity. The area frequency filtering is fairly comprehensive and theoretically demanding discipline. The aim of this work isn’t to describe in detail and to include knowledge of the frequency filters, but only to clarify the aforementioned issues. In particular, we focus practically on filters working on other physical principles, especially on the crystal structure of partition filters and ceramic filters. The circuit simulation programs through classes Spice will be one of the parts of the theoretical analysis. There will be presented various options for implementing these filters, and the test products used in the design. The laboratory exercises dealing with frequency filtering and measuring engineered product will be made and based on the theoretical findings of this work. The laboratory exercises will include the developing of the model protocol.
|
|
|
Electronically reconfigurable frequency filters
Gajdoš, Adam ; Langhammer, Lukáš (referee) ; Jeřábek, Jan (advisor)
The aim of the thesis was design of reconnection-less and electronically reconfigurable filters of SISO type with non-traditional active elements. Adjustability of bandwidth or quality factor is also required. First part of the thesis deals with theoretical analysis of filters, their operation modes and design of frequency filters using Signal-flow graph method aswell. Last but not least, electronical reconfiguration of transfer function and parasitic analysis was discussed. Another part describes active elements used in the practical part of thesis. Behaviors and design of active elements using existing circuits (e.g. UCC,EL2082) are described and their transformation into the Signal-flow graph form too. In the practical part five reconnection-less and reconfigurable filters of SISO type was designed using SNAP program. Simulations were done using Orcad program with ideal and real simulation models of active elements. Last part deals with filter design in EAGLE and experimental measurement.
|
|
|
Frequency filters with difference current amplifier
Jirounek, Matěj ; Lattenberg, Ivo (referee) ; Vrba, Kamil (advisor)
This master´s thesis deals with the differential filters working in the current mode. It is dealt with the design methodologies of these filters and conversion circuits from voltage to current mode. Own work deals with 4 types of differential participation of structures. In this work there has been used programs SNAP and OrCAD. These programs were used for simulations of filters to proposed proper design. Results from this thesis is showed by graphs.
|
guest ::
