|
|
Modern Trends of Heating of Family House
Dohnal, Jakub ; Suk, Ladislav (referee) ; Lisý, Martin (advisor)
This bachelor thesis deals with modern trends of heating of family house. At the beggining is indicated brief history and current sources for heating of family houses. After this is described a research of various technologies for heating with their advantages and disadvantages. The last part is given to comparison all methods of heating and overall evaluation.
|
|
| |
|
| |
|
| |
|
|
Heating of residential building
Ženožička, Filip ; Komínek, Petr (referee) ; Počinková, Marcela (advisor)
The subject of this thesis is the design of heating and hot water in the apartment building in Zlin on Jižní Svahy. The building has five floors above ground and one underground floor. There are designed two variants of heat source for heating and hot water (gas boiler and transfer stations). Part A solved heating water by the use of solar collectors. Part B deals with design of the heating system, hot water heating, insurance and facility expansion. The last part C forms a technical report and drawings heating in the building.
|
|
| |
|
|
Design of heating system for apartment building
Vtípil, Jan ; Horká, Lucie (referee) ; Vyhlídalová, Karolína (advisor)
The bachelor's thesis deals with the design of heating and water heating in a smaller apartment building in the village of Chlumětín in the Vysočina region. The aim is to design heat sources in two variants. The first variant is the classic heating with a gas boiler and hot water heating in the storage tank, which is heated by the same boiler. The second variant is more environmentally friendly heating using two air / water heat pumps and hot water heating is solved using solar collectors.
|
|
|
PCM-based heat and cold storage
Němec, Lukáš ; Ostrý, Milan (referee) ; Šikula, Ondřej (advisor)
In the first part of the bachelor thesis I will deal with the accumulation of heat and cold using materials with phase change and also the design of a PCM storage tank. The aim of my effort is to design the most ideal spacing of tubes in a given tank, so as to achieve the greatest possible heat capacity. I performed simulation experiments in CalA 4.0. The second part is computational, where I focus on the design of heating in the pension. I solve heating with an air-to-water heat pump. I designed solar collectors for hot water heating. The last and third part is the project, which contains the project documentation together with the technical report.
|
|
|
Civic amenities building
Brázdová, Kateřina ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
Mixed-use building in Prostějov The aim of this master´s thesis is to elaborate the project documentation of a mixed-use building in Prostějov. The thesis consists of three parts: architectural-construction part, building services and elective part. The building has two above-ground floors. On the first floor there are storerooms, utility room, sanitary facilities and restaurant with kitchen and storerooms. The second floor is an office floor for one company which includes offices, dayroom, copyroom, meeting room and sanitary facilities. The building is founded on reinforced concrete foundation. The horizontal load-bearing and non-load-bearing structures are designed from ceramics blocks. The building is insulated by ETICS. The vertical load-bearing structures are designed from Spiroll slabs. The building has a green flat roof. There are parking spaces on the grounds. The building will be heated and cooled with a heat pump. It will also have an air condition. Part of electricity demand is covered by photovoltaics. In the third part of thesis, I replace frequently used materials with environmental ones in my project and compare them in terms of thermal engineering, acoustics and price. I used DEKSOFT, Hluk+, Autocad and Revit software. All structures comply with the valid standards and regulations.
|
|
|
Solar cooling system
Klusák, Jan ; Fortelný, Zdeněk (referee) ; Pospíšil, Jiří (advisor)
The work is focused on the issue of cold production using absorbent circulation driven by thermal energy solar collectors recovered. The work can be divided into several main parts. In the first part of this work is given an overview of the possible principles of solar cooling system. In the next section followed by a description of the principle of absorption cycles. In the practical part is solved design proposal absorption refrigeration units with a cooling power of 6 kW. This is followed by a proposal to link solar cooling system with the absorption unit. Final section is made of basic technical-economic comparison of solar refrigeration unit with the compressor refrigeration units.
|
guest ::
