Národní úložiště šedé literatury Nalezeno 9 záznamů.  Hledání trvalo 0.01 vteřin. 
Concepts of reducing the forces transmitted between the rigid rotor and its frame based on magnetorheological damping devices
Zapoměl, Jaroslav ; Ferfecki, Petr ; Kozánek, Jan
A usual technological solution how to reduce forces transmitted between the rotor and its stationary part is to apply a flexible suspension with damping devices placed between the rotor and its casing. Optimum performance of the constraint damping elements can be achieved if their damping effect is controllable. As the control depends only on speed of the rotor rotation that does not vary rapidly the semiactive devices based on utilization of the magnetorheological phenomenon can be used for this purpose. Then the damping force is controlled by the change of electric current generating magnetic flux passing through the layer of the magnetorheological lubricant. Three concepts of their arrangement were studied: magnetorheological dampers with only one layer of the magnetorheological liquid and dampers with two separated layers formed by the normal oil and magnetorheological lubricants in the serial and parallel arrangements.
Dynamika strojů 2013
Pešek, Luděk
The aim of the Colloquium was to facilitate the exchange of up to date information and knowledge among specialists in solid mechanics. The main attention was focused on: continuum dynamics, impact and non-linear phenomena, crack propagation, constitutive models, dynamics of linear and non-linear systems, identification, chaos, vibrations, interaction of mechanical systems and fluids, modern computational mechanics and experiments.
Optická měření proudového pole při obtékání samobuzeně kmitajícího profilu
Vlček, Václav ; Kozánek, Jan ; Zolotarev, Igor
V příspěvku jde o interferometrické vyhodnocení aerodynamického měření proudu vzduchu v okolí profilu NACA0015 v režimu samobuzeného kmitání, realizované v aerodynamickém tunelu Ústavu termomechaniky. Zkušební profil vykonával pohyb odpovídající dynamické soustavě o dvou stupních volnosti ve vertikalním směru a rotoval kolem osy umístěné v 1/3 profilu. Odpovídající Machovo číslo bylo 0.45. Je prezentována kinematika profilu, působící síly a momenty během samobuzeného kmitání.
Dynamics of the test bladed disk with imposed damping wire
Pešek, Luděk ; Půst, Ladislav ; Bula, Vítězslav ; Vaněk, František ; Cibulka, Jan
The dry-friction damping realized via the damping wire imposed into the head of the blades is experimentally and numerically investigated under rotation. The electromagnetic impulses synchronized with revolutions are used for the excitation of resonant vibration of the bladings. Dry-friction dampings are evaluated from the attenuation of vibration after switching the excitation.
Výzkum tlakových pulsací a vibrací na turbíně 1000MW
Procházka, Pavel ; Vaněk, František ; Sadílek, J. ; Hodboď, Robert
Na turbíně 1000 MW v Jaderné elektrárně Temelín byl v roce 2012 proveden experimentální výzkum tlakových pulsací se současným měřením vibrací statoru a lopatek ve stupni L-1. Cílem těchto prací bylo nalézt vazby a možné zdroje vibrací lopatek třetí řady během najíždění turbíny. V příspěvku jsou popsány použité metody a zařízení. Pozorované jevy jsou analyzovány se zaměřením na příčiny vzniku vibrací lopatek.
Parametric "anti-resonance" for two-mass reverse pendulum system
Tondl, A. ; Pešek, Luděk
This contribution deals with further utilization of the parametric anti-resonance phenomenon based on additional parametric excitation fulfilling special conditions having the damping effect. The anti-resonance be used not only for suppressing self-excited vibrations or parametric resonance or decreasing externally excited resonance vibration of the equilibrium position of the not directly excited sub-system of the autoparametric system when the vibrations of the mentioned sub-system is not desired, e.g. rotating machine with vertical shift or the box with sensitive apparatuses situated on the vibrating floor.
Vibration damping by dry friction with microslips
Půst, Ladislav ; Pešek, Luděk
An experimental set for measurement of dry friction characteristics at vibration relative motion has been developed and used for evaluation of time histories of friction forces at motion with given amplitudes, frequencies and loading normal forces. The dry friction coefficient and contact tangential stiffness of elastic micro-deformation were ascertained by means of new evaluation method with particular orientation to the very small amplitudes of relative motions in contact surfaces, when the friction coefficient goes to the zero and the corresponding hysteretic curve degenerates into a oblique line. All displacements are then elastic micro-deformations without any friction.
Kombinované lineární a nelineární časově heteronomní tlumení ve vnitřní dynamice nelineárních parametrických soustav
Hortel, Milan ; Škuderová, Alena
Při projektování vysokootáčkových planetových převodových soustav o minimálních dimenzích a hmotnostech nejsou v tomto stadiu návrhu konstrukcí předem dostatečně známé mnohé funkcionální závislosti parametrů jako např. konstantní či časově heteronomní tlumení v záběrech ozubení kinematických dvojic apod. Je proto nutné, aby se základní výzkum v této oblasti, vzhledem k bezpečnosti a spolehlivosti soustav, hlouběji zabýval jak kvalitativně tak i kvantitativně analyticky i numericky touto problematikou. Hodnoty a funkcionální závislosti např. tlumících parametrů řešených systémů se mnohdy pouze odhadují a v teoretických analýzách se pak vlivy odchylek odhadovaných velikostí parametrů od jejich skutečných hodnot variačně řeší v širších předpokládaných rozsazích a tudíž i možných důsledků na vnitřní dynamiku těchto systémů. Na modelu jedné větve silového toku pseudoplanetové slabě a silně nelineární soustavy o šesti stupních volnosti jsou v této studii analyzovány bifurkační rezonanční charakteristiky relativního pohybu ozubení v záběru soustavy s kombinovaných lineárním a nelineárním - kvadratickým časově heteronomním tlumením.
Analytic model of a ball rolling on a spherical surface under harmonic kinematic excitation
Náprstek, Jiří ; Fischer, Cyril
The set of a heavy metallic ball which is rolling freely inside a semi-spherical dish with larger diameter, being fixed to structure, is frequently used as tuned mass damper of vibration. Ratio of both diameters, mass of the rolling ball, quality of contact surfaces and other parameters should correspond with characteristics of the structure. The ball damper is modeled as a non-holonomic system. Hamiltonian functional including an adequate form of the Rayleigh function is formulated in moving coordinates using Euler angles and completed by ancillary constraints via Lagrangian multipliers. Subsequently Lagrangian differential system is carried out. Together with rolling conditions the governing system of seven equations is formulated. Later Lagrangian multipliers character is analyzed and redundant motion components are eliminated. First integrals are derived and main energy balances evaluated together with their physical interpretation.

Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.