|
|
Material printing of UV dosimeters
Třešňáková, Andrea ; Čeppan, Michal (referee) ; Veselý, Michal (advisor)
The subject of this theses is a preparation of chemical UV dosimeters working on diverse principles and their printing. Three UV dosimeters were prepared. The first one is based on a photocalalytic reaction of titanium dioxide with redox dyes. Two other dosimeters are based on a reaction of a photolabile substance able to produce an intermediate reacting with a dye. Prepared dosimeter compositions were coated using a material roll-to-roll printing machine on a corona-treated PET foil. Prepared dosimeter compositions were calibrated for desired exposition to UV radiation doses. Validity of a reciprocity law was verified.
|
|
|
Barrier properties of varnishes for protection of photographs
Lokotschová, Radka ; Čeppan, Michal (referee) ; Veselý, Michal (advisor)
In this diploma thesis the basic principles of inkjet print, ink composition, print media and degradation mechanisms of ink dyes are summarized. The thesis deals with study of varnish barrier properties in coloured inkjet prints. Permeability of water vapour and oxygen (parts of atmosphere) depending on different coatings are tested there. In addition the influence of ozone on degradation of dyes was studied, while ozone was permeating through barrier varnish layer of inkjet print. Ozone plays an important role in degradation processes of the inkjet prints and it also causes a gas-fading. Concentrations of acting ozone were established by iodometric titration. Simultaneously kinetics of degradation of Orange 7 was studied on indicator papers.
|
|
|
Investigation of Methacrylated PVAl Photochemical Crosslinking
Králová, Marcela ; Čeppan, Michal (referee) ; Dzik, Petr (advisor)
This diploma thesis deals with a detailed study of photoinitiated radical polymerization of macromers base on PVAl containing lateral GMA moieties. The main goal is the evaluation of the influence of photoinitiator concentration, polymerisable group content and/or other aditives on the polymerisation rate. Other goals include the study of possible influencing the photochemical speed by lowering the glass transition temperature, compatibility with various photoinitiators etc. Attention is also paid to the study of prepared 3D polymeric networks properties
|
|
|
Lightfastness of inkjet prints
Buteková, Silvia ; Čeppan, Michal (referee) ; Veselý, Michal (advisor)
The stability of inkjet print is influenced by a lot of factors. Just the surrounding environment in image stability plays an important role. When the prints fade, not only this does occur by light exposure, but also considerable effect has relative humidity, ozone and other air pollutants. The types of receiving layers or ink composition belong to other factors, which affect the stability of prints. This diploma thesis deals with the long-term ageing of digital prints produced by ink jet technology. The study of resistance of inkjet prints was realized on nine different types of media. Samples were prepared with use of dye-based and pigment-based inks. The attention was especially focused on the influence of light on print durability, but study was also oriented on the impact of ozone. The samples were exposed to the indoor daylight. Changes in printed colours were measured and evaluated in colorimetric quantities. In this study of inkjet prints degradation the dependence of colour gamut volumes on UV and VIS exposure dose was evaluated.
|
|
|
Printed chemical sensors of UV light
Fanglová, Michaela ; Čeppan, Michal (referee) ; Veselý, Michal (advisor)
The main task of the bacherol´s thesis was to prepare a photosensitive layer reacting to the radiation dose with a color change. And to calibrate the prepared dosimeters to the required values of the radiation doses of the UVB radiation. This bacherol´s thesis is about light dosimeters, which are based on photochemical reactions. These reactions take place in a thin polymer layer. The experimental study focoused on the preparation and application of photosensitive compositions. These prepared dosimeter compositions were exposed to different doses of UVB radiation, where the color response to the exposure was monitored.
|
|
|
Barrier Polymeric Layers for Inkjet Prints Protection
Štěpánková, Eva ; Čeppan, Michal (referee) ; Ďurovič, Michal (referee) ; Veselý, Michal (advisor)
Práce podává přehled o dostupných a využívaných metodách, normách pro testování a hodnocení světlostálosti barevných fotografií a tisků. Bylo provedeno porovnání jednotlivých platných norem a návrhů na hodnocení. Tato práce pojednává o ochraně inkjetových tisků pomocí lakování. Byl připraven lak kompatibilní s fotografickými médii. Připravená kompozice byla obohacena o UV absorbéry EVERSORB ve dvou koncentracích. Pro srovnání byly také testovány tři druhy komerčních ochranných fotografických laků. Výtisky se třemi barvivovými inkousty opatřené lakovou vrstvou, byly vystaveny jak urychlenému světelnému stárnutí v xenonové testovací komoře, tak urychlenému stárnutí v ozonové testovací komoře. Na základě měřených odrazových spekter byl vypočítaný objem barvového gamutu pomocí softwaru Volga. Byl sledován úbytek gamutů v průběhu světelného stárnutí i při expozici ozonem. Stárnutí vzorků probíhalo do ukončení testu, nebo do dosažení kritéria 30% úbytku objemu barvového gamutu. Také bylo pozorováno selhání recipročního zákona, které ukazuje na jistou nepřesnost při předpovědi dlouhé životnosti vzorků. Pomocí změny barvového gamutu byla posuzována ochrana připraveného laku před UV záření a ozonem. Studované vrstvy laků byly dále charakterizovány na prostupnost kyslíku a vodní páry.
|
|
|
Degradation of Inkjet Printouts
Stančík, Jiří ; Kaplanová, Marie (referee) ; Čeppan, Michal (referee) ; Veselý, Michal (advisor)
Inkjet printing technology became a popular technology for printing digital photographs in the last decade. There is a big variety of both original and alternative (cheaper) inks and print media for the consumers. But there is a question if the cheaper material provides also comparable printout quality. For this reason, it is important to test the properties of such inkjet printouts. There are several ways how to test the lightfastness of the printouts: long term storage under environmental conditions, or short, accelerated ageing tests. The stability of printouts is affected by many factors, such as ink-receiving layer, ink composition, UV and visible light intensity and air pollutants concentration in the environment. Some inkjet printouts exposed to light usually undergo surprisingly fast fading, but light is not the only dangerous condition for inkjet printout. The two types of test targets printed with dyebased inkjet inks on various paper types were subjected to both accelerated test in a xenon test chamber and light and environmental pollutants long-term test in a sunny indoor corridor. The values of light intensity were continuously monitored and samples properties were regularly measured with a spectrophotometer. Another type of testing included accelerated ozone ageing of inkjet dyes. The colour gamuts and gamut volumes were calculated from collected spectral data. Total colour difference E*ab was also evaluated, its increase served as a tool for finding the formal printout degradation rate constant. It was found out that the dyes in ink-receiving layers of printouts underwent significant degradation in all tested conditions. The degradation rate depended on the type of used print media. The reciprocity behaviour of printouts was also studied. Recent inkjet printouts testing miss some actual ISO norm which should show the way of effective lightfastness evaluation. One of the main aims of this work was to find some new and alternative ways of inkjet printouts lightfastness evaluation. The method of printed inks concentration determination from the test charts spectrophotometric measurements was also proposed.
|
|
|
Interaction Between Hyaluronan and Amphiphilic Molecules
Venerová, Tereza ; Burget, Ladislav (referee) ; Čeppan, Michal (referee) ; Pekař, Miloslav (advisor)
This work is focused on interaction between hyaluronan (Hya) and amphiphilic molecules. Using fluorescent probes method were carried out screening of the interaction of various surfactants with Hya. For further examination was chosen cetyltrimethylammonium bromide (CTAB). Interactions in this system have also been studied using fluorescence correlation spectroscopy (FCS), and additionally were performed initial tests of the cytotoxicity of the system. As an alternative CTAB were also used hydrophobically modified amino acids. Results showed their self-aggregation, but their interactions with hylauronanem was not as strong as with CTAB. The interaction of gel systems Hya-CTAB have also been studied, and was found to contain a hydrophobic domain capable solubilize hydrophobic substance. Thermogravimetric have been established that are able to contain up to 98% wt. water and rheologically were characterized their mechanical properties. These are tunable due to molecular weight (MW) of the hyaluronate. With increasing value of MW increases mechanical strength of the gel and decreases its fluidity.
|
|
|
Energy transfer and hydrophobic domains in colloidal systems
Kučerová, Petra ; Čeppan, Michal (referee) ; Pekař, Miloslav (advisor)
In this thesis resonance energy transfer between perylene and fluorescein in tetradecyltrimethylammonium bromide (TTAB) solution was studied. The influence of addition of native or modified sodium hyaluronate on resonance energy transfer was also investigated. The addition of native sodium hyaluronate supports energy transfer at lower fluorescein concentrations and the addition of modified sodium hyaluronate influences the maximal value of energy transfer effectivity. Strong influence on the critical micelle concentration (CMC) values with the addition of sodium hyaluronate during CMC of TTAB determination was investigated. The data indicates not only micelles formation, but also formation of aggregates of sodium hyaluronate with TTAB. Aggregation numbers of TTAB with addition of native and modified sodium hyaluronate by the quenching of pyrene by cetylpyridinium chloride (CPC) was investigated. The addition of sodium hyaluronate into the solution of TTAB changes the average mean aggregation number. Solute exchange between micelles of TTAB and the influence of addition of modified sodium hyaluronate on this exchange was also investigated. No solute exchange between micelles in TTAB and in TTAB with added modified sodium hyaluronate was discovered during this experiment.
|
|
|
Phospholipids as the basis of biodegradable delivery systems
Burdíková, Jana ; Čeppan, Michal (referee) ; Mravec, Filip (advisor)
This thesis is focused on investigation of phospholipid-hyaluronan system. First, appropriate method for preparation of bulk solution of phospholipid/lipid and suitable fluorescence probe were chosen. Sonification was selected as a method for preparation of bulk solution and pyrene was chosen as a fluorescence probe. From the group of phospholipids lecithin was selected. Next to phospholipid, lipid with no phosphate group (DPTAP) was utilized for comparison, alternatively a mixture of lipid (DPTAP) and phospholipid (DPPC). Instead of hyaluronan another polyelectrolytes (sodium polystyrene sulfonate, sodium alginate) were used too. Measurements were performed in water environment and in phosphate buffer saline (PBS). All investigation was accomplished by fluorescence spectroscopy and dynamic light scattering.
|
guest ::
