|
|
3D Printing of Ceramic Bone Grafts with Different Internal Architecture
Novotná, Lenka ; Sekora, Jiří (referee) ; Provazník, Ivo (advisor)
Bioceramics in the form of scaffolds hold great promise in bone tissue regeneration. While the scaffold composition is important for biocompatibility, the internal architecture plays a key role in allowing proper cell penetration, nutrient diffusion, bone ingrowth, vascularization as well as mechanical properties. A solid freeform fabrication is a promising processing technique, allowing to study structural parameters independently. This bachelor thesis is focused on ceramic bone replacements with different internal structure. The thesis is divided into 8 chapters. The first four chapters briefly summarize the current state of the art in the following fields: bone structure, requirements for synthetic bone replacements, scaffold architecture, and fabrication methods with an emphasis on 3D printing. The next chapters deal with experimental part. The image analysis of mouse skeleton was performed. On the basis of the measured pore size (50 200 m) and according to the literature search, 16 structures with various shape, curvature and pore size were designed. The CAD models were printed by a stereolithography from a tricalcium phosphate dispersion. Sintered ceramic scaffolds exhibited an ideal structure for application in bone tissue engineering. Scaffolds contained both interconnected macro- and micropores of optimal sizes up to 500 m and about 3 m, respectively. The results confirm that stereolithography is suitable, and compared to others, precise method for preparing scaffolds having different internal structures. The individual structural characteristics influencing the scaffold behaviour will be possible to study independently to each other. And thus improve the scientific knowledge in the field of treatment of large segmental bone defects.
|
|
|
Silicon substituted calcium phosphate based bioceramic scaffolds
Karkuszová, Karina ; Šťastná, Eva (referee) ; Novotná, Lenka (advisor)
The theoretical part of this bachelor thesis summarizes the current state of knowledge of bioceramic materials based on calcium, phosphorus and silicon. More specifically, it focuses on calcium phosphates, the demands placed on them, the porosity of 3D foams, and biological properties such as biodegradation and bioactivity. 3D bioceramic calcium phosphate foam doped with silicon appears to be a suitable material for use in biomedical applications. It is the silicon that plays a role in the development of healthy bone and the formation of new tissue. Silicon substitutions are important in the field of investigation because they improve the bioassay of phosphate calcium. In the experimental part, calcium phosphate powders were first prepared by the hydroxyapatite and silica fusion reaction. Selected powder contents were 0; 0.1; 1, 2.5, 5, 10 and 20 wt.% SiO2. The samples were sintered at 1100 °C, 1200 °C and 1300 °C. The second part consisted in the preparation of 3D foams by direct penetration with polyurethane and the subsequent characteristics of phase composition, solubility and bioactivity. Bioceramic foams had a highly porous structure. For 42 days, sample behavior in Tris-HCl and simulated body fluid (SBF) was monitored. The results of the experiment have shown that the samples are bioactive and silicon substitution increases phosphate calcium solubility. Therefore, these materials are potentially useful for biomedical applications
|
|
|
Proposal of Internal Directive for a Municipality
Novotná, Lenka ; Lucie,, Bousková (referee) ; Zábojová, Lenka (advisor)
The Bachelor’s work is specialized on management of accounting in selected entities. The work specifies what is community, accounting and internal guidelines. After the analysis of internal guidelines on the municipality in Letovice, the work includes draft of new internal guidelines in domain of long-time property, which should redound to simpler interpretation these guidelines by reason of detailed division.
|
|
|
Synthesis and sintering of zirconia based ceramics for biomedical applications
Jahodová, Daniela ; Novotná, Lenka (referee) ; Částková, Klára (advisor)
The present thesis focuses on the preparation of tetragonal zirconia doped with yttria oxide, ceric dioxide, and magnesium oxide. In its theoretical part the thesis covers the characteristics of doped ceramics, the possible methods of powders preparation and of their further processing. The experimental part describes the precipitation synthesis of zirconia in base environment and further processing for ceramics. Also studied were the influences of dopant and of the processing technique used on the phase composition and microstructure of the resulting ceramics. To describe the powder structure, the thermal, dilatometric, surface area, and x-ray analyses were performed; as well as both the scanning and transmission electron microscopy employed. Dry processed ceramics showed the average grain size of 87–94 nm and the relative density in the range of 84,0–99,3 %. In comparison, the ceramics produced of hydrothermally synthesised powders proved the average grain size of 75–85 nm and the relative density between 92,7-99,9 %. As the next step, samples were subjected to low-temperature degradation for the time of 5 and 15 hours. Samples consisting of pure tetragonal ZrO2 were resistant to 5 and 15 hours of low-temperature degradation at 180 °C.
|
|
|
Shaping of bioceramic hydroxyapatite scaffolds on micro level
Pejchalová, Lucie ; Novotná, Lenka (referee) ; Salamon, David (advisor)
Due to increasing average age of population around the world, there are more patients who need surgery of musculoskeletal system. In some cases, it is even necessary to implant new bone scaffold or replace joints. Hydroxyapatite is the most frequently used material for its biocompatibility and bioactivity. On the other hand, mechanical properties constraints its use in porous scaffolds. The method providing both good mechanical stability and high porosity is freeze – casting. This method utilises controlled freezing to form lamellar structure. During freezing of slurry, ice crystals grow in direction of temperature gradient. In next step, ice crystals are removed by lyophilisation and lamellar structure is revealed. This structure is relatively unstable and needs to be reinforced by sintering. There are many aspects affecting resulting structure – freezing schedule, slurry concentration etc. We used water/ceramic slurries in various concentrations of hydroxyapatite (7,5 % vol., 10 % vol., 15 % vol. and 20 % vol.). These slurries were used for preparation of porous bone scaffolds. We tried to add 3D mash to form net of channels and we observed favourable changes in porosity. 3D mash was removed during sintering. Resulting bioceramics structure was highly porous (up to 90 %). These scaffolds had an acceptable ration between porosity and mechanical stability, too. We considered, adding of 3D mash, as good way to form channels of desired properties.
|
|
| |
|
| |
|
| |
|
|
Basal stimulation
Novotná, Lenka ; Schneiderová, Michaela (advisor) ; Kupečková, Ivana (referee) ; Juřeníková, Petra (referee)
The paper deals with the sence of a basal stimulation. It's composed of a theoretical part and a practical one. In the theoretical part there is global information about basal stimulation, its components and development. The paper is directed on positioning and the main accent is on the nest position. The influence on psychical and physical perception is included too. Explored group is composed of healthy persons and patients who are suffering from stroke and are hospitalizated on the Neurological clinic. In the practical part there is research that in praxis explores how do people react in the nest position. All of them expressed their feelings by drawing a picture with comentary.
|
|
|
Automatized Data Abstraction
Novotná, Lenka ; Kofroň, Jan (advisor) ; Adámek, Jiří (referee)
Model checking belongs to one of the most favourite techniques for verification of software systems. During the verification process of model checking, the whole state space of the given system is traversed. However, the state space of software systems can be huge and thus it is not possible to traverse it in reasonable amount of time. This problem is called "state explosion problem" and it can be solved using a method of abstraction that creates an abstract program from the concrete one by mapping the concrete data to abstract data. The abstract program covers all the behavior of the concrete program that is necessary for verification, but has significantly smaller state space which allows its verification in reasonable amount of time. This work is concerned in automatized data abstraction. Three known methods for automatized data abstraction are described and compared to each other. Based on these methods a new method for automatized data abstraction of object oriented programs is designed.
|
guest ::
RSS feed.