|
|
Access Control System using BodyCom Technology
Křístel, Jan ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
This master's thesis is primarily focused on the design of an electronic access control system using the BodyCom technology. The first section describes the working principle of this technology and its influence on human body. The second section shows an application of this technology in construction options of the electronic access control system.
|
|
|
SDR-based UHF RFID communication analyzer
Vychodil, Josef ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
Main topic of this thesis is development of software for capture and analysis of RFID communication in UHF band (standard EPC Class-1 Generation-2). One part of the work is focused on the basics of the RFID systems, software defined radio concept and graphical programming language LabVIEW. Main part of this thesis is discussing the developed software itself, its methods and principles. Next part is dedicated to present the graphical user interface of created application and its functionality. Last part of this thesis contains examples of captured and analysed processes in UHF RFID communication.
|
|
|
Global Positioning System Signal Emulator
Hofman, Jan ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
Thesis is adressed to the principals of a satellite navigation. It is focused on a determination of a longitude, latitude and altitude of a single point on the surface of the Earth. It contains analysis of navigation messages and a manner of processing of navigation signals in GPS receivers. Realization of an emulator of the navigation signal of GPS system in Matlab is also described. The purpose of this emulator is a generation of navigation messages, which could be transmitted by universal software radio. The last part of thesis contains the analysis of these signals, which were captured by second software radio.
|
|
|
Radiocommunication Monitor for ISM Band at 868 MHz
Frecer, Petr ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
This thesis deals with the design and the realization of the radiocommunication monitor for the 868 MHz band. In the thesis, a description of licence-free radio bands complying ITU recommendations and ETSI standards is given. A special attention is paid to the 863 MHz - 870 MHz band. The transceiver CC1020 that forms the base for the monitor is described in detail. The circuit design, the monitor assembly and the firmware creation are presented step by step. The radiocommunication monitor is portable and battery powered. The monitor is able to display RF signals in the 868 MHz band, to indicate the frequency error of the transmitter and to receive FSK modulated signal. Demodulated data can be transferred to the personal computer via the USB.
|
|
|
RFID bus-stop identifacation for sightless people
Straka, Radomír ; Zamazal,, Michal (referee) ; Dušek, Martin (advisor)
The aim of this master’s thesis is to design a device for identification of bus stops for blind people. In the beginning the work describes information about the RFID system, characterizes each part of this system, mutual communication of its components and evaluates possibilities of RFID communication frequency bands. Subsequently the work describes the block diagram of the device and the circuit scheme of each block. Work concentrates on a selection of circuit components for the RFID transceiver, the voice module, the control module and choose a suitable transponder to place it on metal constructions. Control programs are also described. PCB design of each board, partlists and source codes are in the appendices of this master’s thesis.
|
|
|
Mobile Objects Tracking Module
Famfulík, Lukáš ; Zamazal,, Michal (referee) ; Šebesta, Jiří (advisor)
The aim of this thesis is to innovate NCL 07 unit made by NAM system a.s. The new device is intended to have improved parameters and diminished dimensions. It should be fully comparable to similar products on market. In the first part there are described features and individual circuits of NCL07 unit. Further there is done an analysis to suggest modifications leading to reduce proportions of DPS and to enhance other parameters including SW design improvement. Theoretical part deals with selection of main measured values and methods of verification of measurement accuracy. There is also described theoretical basis used in the oncoming sections of the thesis. In the practical part there are presented procedures of designs of innovated product. In the conclusion there will be made testing of new unit and results will be compared to competitive commodities.
|
|
|
Digitally Controlled Switching Power Supply
Krška, Vlastimil ; Zamazal,, Michal (referee) ; Šebesta, Jiří (advisor)
This master’s thesis is an introduction to switching mode power supplies, especially focused on digital control. It summarizes the basic topologies of switching mode power supplies, and discusses the fundamental issues of digital power supply control. It also summarizes basic informations about Piccolo microcontrolers, about experimental kit and about main parts of sample source code. Also is described here own implementation of the control law and the theory and implementation of maximum power point tracking. The conclusion of this thesis deals with implemantation a testing of the designed digitally controled switching power supply.
|
|
|
HF band power amplifier
Korvas, Miroslav ; Zamazal, Michal (referee) ; Šrámek, Petr (advisor)
The theme of my diploma thesis is a realization of the high frequency amplifier with possibility to change its class between class A, B and C with output low pass and band pass filters. The output power is supposed to be at about 10 W in frequency range 3,5 MHz to 14 MHz. The thesis contains theory of amplifier respectively transceiver and filters. In next parts I will design, simulate, realize and measure created amplifier and filters.
|
|
|
HW interface of database server
Janů, Petr ; Zamazal, Michal (referee) ; Fuchs, Michal (advisor)
The aim of master's thesis is implementation of hardware interface database server. Interface will be collecting data at installation place. Interface will be connected to a remote MySQL server using an Ethernet network and saving data received by serial line in a database.
|
|
|
Digital Signal Processor for Handheld RFID Reader
Benetka, Miroslav ; Zamazal, Michal (referee) ; Šebesta, Jiří (advisor)
This diploma thesis deals with design and realization of a module for a digital signal procesor, for handheld RFID reader working in UHF band. It utilises a special chip EM4298 for RFID signals processing. Module is controlled by the microcontroller ATmega32L, which communicates with the PC through USB bus. Settings in EM4298 is made by a service program which processes received identifying data obtained from tags. Source codes for microcontroller are created in AVR Studio 4.13 program. Source codes for microcontroller are created in C++ Builder 6.0 program. Further thing is Desing and realization of analog interface and a UHF transceiver for wireless communication with tags. A Webench program was used for the analog interface design, which is freely available on the internet. For verification of parameters of the analog interface it was used PSpice 10.0 program. The UHF transceiver is build-up with a MAX2903 chip (transmitter) and AD8347 (receiver) and transmitting and receiving antennae.
|
guest ::
RSS feed.