|
|
Range extender of an electric vehicle
Jelínek, David ; Píštěk, Václav (referee) ; Drápal, Lubomír (advisor)
This thesis describes the design of a four-stroke engine with two cylinders, using as a range extender. The first chapter briefly introduces the company Škoda Auto a.s., for which the range extender was designed. Also, there is a list of the available electric and hybrid vehicles manufactured by this company. The next chapter deals with the division of hybrid vehicles, as an intermediate step for the use of electric vehicles, the reason for their use and the definition of advantages and disadvantages of hybrid vehicles. Also, the range extender technology is described here. The third chapter contains a description of the conceptual design of the range extender and describes the design and balancing of the crankshaft in more detail. The last chapter describes the calculation of the crankshaft dynamics and the individual parts load. The resulting crankshaft safety is determined by comparing the calculated values with a series-produced 1.0 MPI evo engine, which is the base of the described range extender.
|
|
|
Passive and active safety features in passenger cars
Jahoda, Patrik ; Kučera, Pavel (referee) ; Píštěk, Václav (advisor)
This bachelor thesis deals with safety elements of all kinds in personal vehicles and their general introduction. This elements are divided and broadened and roughly described. My work contains short summary of history of safety elements. Conclusion contains evaluation of individual elements. Video with crash test is inserted in this graduate work.
|
|
| |
|
|
Mechatronic Approach to Vehicle Dynamics
Kučera, Pavel ; Kaplan, Zdeněk (referee) ; Havlíček, Miroslav (referee) ; Píštěk, Václav (advisor)
This theses deals with mechatronic approach to a vehicle dynamics. It is divided into two main parts. There are prepared vibration analysis, measurement and analysis of functions of truck powertrain in the first part. The second part describes the creation of computational models allowing to simulate driving conditions, vibrations of the vehicle and its extension for the development of mechatronic systems. There are shown different driving modes to control created algorithm of mechatronic system. The main tool for the development of mechatronic systems is the created simulator of vehicle enabling testing of computational models in real time.
|
|
|
Turbochargers with electric support
Žák, Ondřej ; Kučera, Pavel (referee) ; Píštěk, Václav (advisor)
This bachelor's thesis is aimed at supercharging combustion engines and comparison of different approaches in this field. There are mentioned mostly methods of multistage supercharging and turbocharging with electric support. Main subject of this paper is technology with future applications.
|
|
|
Powertrain of in-line three-cylinder diesel engine
Riemel, Pavel ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
Objective of bachelor’s thesis is for main predetermined geometric, thermodynamic and operation parameters cylindrical unit of line three-cylinder compression-ignition engine perform calculation of thermodynamic cycle, project basic dimensions of piston group and for noted operating modes perform strength check of con rod eye. Resulting values compare with comparable compression-ignition engine and verify its appropriate functionality. In preamble of work is mentioned compression-ignition engine, its basic usage, principle of function and description its main parts. The work is compound of two basic parts. The first contains description of calculation with related graphic and the second calculating supplement in which are calculations of thermodynamic cycle, forces reacting on piston group, strength calculation and control of con rod eye. At the close results of calculation are analysed.
|
|
| |
|
|
Five-cylinder in-line diesel engine with viscous type damper
Procházka, Miloslav ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
The aim of this diploma work is to design moving parts of the five cylinder inline diesel engine with given parameters, then to balance centrifugal forces and moments and design viscous torsional vibrations damper and calculate forced oscilations without the damper as well as with the damper. The designed parts are put to stress analyse by finite elements method. My design is based on similar construction of four cylinder engine Zetor.
|
|
|
Powertrain of in-line five-cylinder diesel engine
Zarambukas, Michalis ; Novotný, Pavel (referee) ; Píštěk, Václav (advisor)
The aim of this graduation theses is geometrical and thermodynamic calculation of determined five-cylinder diesel engine and calculation of operation parameters of cylindrical unit and then to compare them with real motor and strike the balance. Other step is to work out thermodynamic cycle and draw the result in p-V diagram. Then to calculate power, effecting on piston which includes proposal of basic proportion of piston and wrist pin, and it follows weigh of piston group and maximal quickening and inertial force of piston group, calculation of specific pressure and pressure in wrist pin. Other purpose is to determine basic proportion for piston rod and to focus on material qualities of con rod eye and bronze case, determination of maximal pressure due to inertial forces comming from gas pressure and security against possible slip and tiredness. At the beginning is described diesel engine from its foundation, its activity to its use in company. At the close are reviewed the results of the calculations.
|
|
|
Fuels from Biomass.
Poskočil, Milan ; Píštěk, Václav (referee) ; Rauscher, Jaroslav (advisor)
Bachelor´s thesis deals with the study of the status quo use of fuels derived from biomass for automotive engines and their prospects. The goal of this work is processing the inventory of motor fuels derived from biomass, their utilization and illustrate the developments in this field. The work is focused mainly on the situation and developments in the Czech Republic.
|
guest ::
