|
|
The bridge among buildings
Chaloupka, Petr ; Ing.Karel Sýkora (referee) ; Puchner, Josef (advisor)
This master's thesis deals with the designing of the appropriate supporting steel structure footbridge for pedestrians. The footbridge is used to connect two separate buildings (buildings D and Z at the Faculty of Civil Engineering Brno University of Technology). Four variants have been designed about solutions supporting steel structure. The final variant was prepared in detail and was carried out static assessment of the individual elements and selected details. The main supporting structure of this variant are two trusses. Diagonals of these trusses are designed linkage system of Macalloy 460. Bridge deck is designed of composite steel a concrete board with crossbars. The footbridge is designed as simple beam with an overhanging end. Length span is 34.8 m, length overhanging ends is 5.8 meters. The total length of the footbridge is 40.6 meters. Width of footbridge is 2.8 meters. Free width is 2 meters. In the cross point with the axis of local road is height of footbridge above ground 4.43 meters. Next to the building Z, there is a footbridge stored on a concrete support, near the building D, the footbridge is stored on a steel frame of support. The footbridge is deposited on elastomeric bearings. The footbridge is being protected from the weather. The sheating of the building is designed by Wictec 60 system. The master's thesis also contains drawing documentation of the proposed solution.
|
|
|
Steel structure of an industrial building
Jílek, Josef ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
This thesis deals with structure of the single-aisle steel industrial hall in accordance with the arrangements of the building with a span of 30 m, a height of 84 m and corresponding height of the cantilever of a crane track girder is 9,0 m. In the hall are considered two cranes with a capacity of 50/12,5 t and 32/8 t. The main bearing element is formed by lattic truss stored on solid pillar down anchored in transverse direction. Distance of transversal pillars is 12 m and between them designed hanging purlins. The structure is designed for the district of Brno.
|
|
|
Sports hall
Hellebrand, David ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
This bachelor’s thesis deals with a project of roof load-bearing structure of a sports hall situated nearby the city of Opava. The sports hall would be designed for common sports such as handball, football, tenis, voleyball or basketbal. Groun plan scantlings of the con-struction are of 36 x 48 m and clearance of 8 m. Hall travers bond is composed of 3 m high lattice frames that are hinge-connected to a housed joint. Accouplement between the sup-porting lattice frames is done due to longitudial effective purline which continue to the wall-mounted parts of the structure. Spatial rigidity is made safe due to sway bracings and purline.
|
|
| |
|
|
Rehabilitation and extension of the steel building
Výborný, Martin ; Sýkora, Karel (referee) ; Puchner, Josef (advisor)
Project deals with reconstruction and extension of steel structure according to the current norms while being focused on utilizing materials used in the original structure and on simple erection. It is about a former milk-drying factory with investor`s requirements to lower the height and increase the floor area. After the consideration of variants it was decided to select the one that provides the investor with the best economic results. Both modern software and manual calculations were used when designing the project.
|
|
|
Footbridge
Smělíková, Petra ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
The topic of my Bachelor's thesis is a static assessment of a bearing structure of a current footbridge which is also used for cycling. It is placed in Kunovice near Uherské Hradiště. The length of span is 28 meters. Its construction is solved as space framework with through-span. Main beam is truss structure with upper saddle flange. The height of beam in the middle of the span is 2.5 meters and above supports is 1.5 meters. The calculation is done either by hand or using calculation program Scia Engineer 2012.0.
|
|
|
The storage hall
Urbánek, Jan ; Šmak, Milan (referee) ; Puchner, Josef (advisor)
The subject of this bachelor's thesis is to design the steel roof structure of storage hall in the area of Třebíč city. The plan dimensions of the structure are rectangural 43.200 x 27.850 m. The height of the structure is 8,150 m. The hall is design with gable roof. The main load bearing structure is comprised by an arch frame. The width of the frame is 24.000 m. The spacing of the frames is 4.200 m. Thje frames are connected with purlins. The longitudal rigidity of the structure is provided by transverse wind braces, purlins and walers. The roof covering is composed of sandwich roof panels laid directly on the purlins. The cladding is composed of sandwich wall panels. Along the storage hall is a covered ramp.
|
|
|
The roof structure of a storage area
Kuběna, Kamil ; Sýkora, Karel (referee) ; Puchner, Josef (advisor)
My task was to design and consider the carrier of steel structures for roof storage area in Brno, so that the structure meet all the requirements for buildings and fulfill its function. Roofing, with grand-plan dimensions 50 x 20 m clear height of 4,5 m. Cross sections of the main elements were proposed and considered and also selected joints and details of the structure. Assigned drawings are included in attachments of the thesis.
|
|
|
The roofing of a railway station
Olbert, Jan ; Šmak, Milan (referee) ; Puchner, Josef (advisor)
The goal of this thesis is structural design of railway station lobby steel roofing. The construction dimensions are 63,0 m x 300,0 m with height adapted for railway vehicles traffic according to ČSN 73 6320 technical standard. The two-bay hall cross coupling consists of lattice trusses mounted on restrained columns. Axial spacing between individual bonds is 4,0 m. In the longitudinal direction the stability of articulated columns is secured by truss bracing placed in the roof and walls.
|
|
|
The Roofing of Terraces of a Stadium
Bartoň, Radek ; Sýkora, Karel (referee) ; Puchner, Josef (advisor)
My task was to propose and consider steel structure of roofing of a terraces on an athletic stadium. Terraces, with the ground-plan dimensions 12,0 x 80,0 m, are designed as a reinforced concrete structure and its structural analysis is not included in this thesis. Construction is situated in area of Rožnov pod Radhoštěm, which meant, It had to be accounted with considerable variable loads (wind, snow), which is associated with enlargement of a cross-sections. Cross sections of the main elements were proposed and considered and also selected joints and details of the structure. Assigned drawings are included in attachments of the thesis.
|
guest ::
RSS feed.