|
|
Production of part Tube by solid forming
Grufík, Lubomír ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Propose of this thesis is designing production technology of reducing part of tube. The production of requested part is designed on the base of calculations and simulation in one operation. This operation contains widening and squeezing. There is designed on the base of calculations a tool fixed in hydraulic press ZHW 40 for the production. To prepare a semi-product is used cutting by slitting saw.
|
|
|
Optimisation of experimental parameters for double-pulse LIBS
Roščák, Michal ; Novotný, Karel (referee) ; Kaiser, Jozef (advisor)
Diploma thesis presents the description of laser induced breakdown spectroscopy (LIBS) analytical method. The possibility to decrease LIBS detection limits using double pulse LIBS (DP-LIBS) is also detailed. Properties of laser induced plasma (LIP) are discussed. Thesis describes the optimisation process of DP-LIBS setup at laser spectroscopy laboratory of Faculty of Mechanical Engineering, Brno University of Technology. Optimisation was carried out for detection of chrome in steel with respect to detection limits and ablation crater size. Optimised DP-LIBS setup is appropriate for mapping chrome distribution in steel samples.
|
|
|
Optimization of the experimental parameters for laser induced breakdown spectroscopy (LIBS) of selected plant samples
Prochazka, David ; Novotný, Karel (referee) ; Kaiser, Jozef (advisor)
This diploma thesis describes optimization of the experimental parameters for Laser-induced breakdown spectroscopy of plant samples. First part deals with the theoretical method of LIBS and explains the principles and terms. In the next part there is described device which was used for measurements. Main part of diploma thesis describes creation of program for measurement-automation. Main task of program was to solve the connection of autofocus on the sample with the sample automatic movement. Furthermore are described and elaborated specific measurements for optimization of the experimental parameters for Laser-induced breakdown spectroscopy of plant samples.
|
|
|
Analysis of forging disagreement
Novotný, Karel ; Hoza, Jiří (referee) ; Fiala, Alois (advisor)
This diploma thesis deals with the generation of the different drope stampings in industrial process in MBNS Kovárna Company. The main purpose of this thesis is analysis of the industrial process and finding the main factors influences on the process. It especially deals with forgings of the shafts and also flanges with the similar quality of material 42CrMo4. Reasons of the disagreements are focused on surface insensibilities of the forging - crack. First theoretic part introduces company, meaning of the quality of material and describes tools used for finding reasons of the generation of disagreements. In the second practical part is described the whole industrial process and determination of the reasons of disagreements. In concluding part the results are analyzed and some correctional recommendations are suggested.
|
|
|
Production of support by forming
Palán, Robert ; Novotný, Karel (referee) ; Kopřiva, Miloslav (advisor)
PALÁN Robert, Production of support forming.A graduation thesis of master´s studies, Mechanical engineering, Department M2307 Metal forging technology, Specialization 02 Forming, Welding, 2. graduate, 2. year, school – year 2007/2008. FSI VUT Brno, ÚST Department of Metal Forging Technology, May 2008, page NO 66, picture NO 36, chart NO 8, suplement NO 12 The graduation thesis, drew up with in the frame of engeneering studies department M2307, submits a concept of a production by forming. A materiál of a forget piece is steel ČSN 12 050, provided as a semi – finished product in a form of a bar 210 mm, lenght 4 000 mm. The particular dimension stocks with be cut from it to forge out a part. Production work is 100 000 pcs. Based on studies of technologies, suitable for producing the part a specific two stage technology of a drop forging was chozen on a vertical forging press LMZ 6 500, with induction heating of the semi – finished product and a product – trim of fin and pellicle or a trimming press LDO 315 A/S. For this alternate all the required calculations are realized of swages and all the necessary machines for the production of are quested enganget part.
|
|
|
Technology project and layout for holder
Skrýval, Tomáš ; Novotný, Karel (referee) ; Rumíšek, Pavel (advisor)
The project conceived within engineer‘s studies of branch 2303T002 is showing holder produce technology using by the company UniTools Press CZ Valašské Meziříčí. This holder is a part of car seat-adjusting system dedicated for Peugeot 308. According to the literary research, next part of this project is submitting two diferent solutions of produce technology and then it chooses the best one. The best one is chosen with the help of weight values table. The holder is produced in associated tool on press Arisa 400 with nominal force 4000 kN. The holder is manufactured from the roll of sheet steel S355MC (thickness 3mm). In the last part this project is suggesting the modification of produce technology in order to increase tapping tool working life and to increase the production productivity. Keywords: The steel S355MC, tapping, associated tool. y
|
|
| |
|
|
Production of forging piece "Spanner"
Vávra, Jan ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
Projects developed within the bachelor's degree in Mechanical Engineering, presented a proposal technology forged wrench - the hot-rolled steel bars 11 523.0. The thesis also compares the past with conventional methods of production and considering the new technological process of manufacturing. Based on the literature studies about fitting and calculations, was chosen to die forging hammer KHZ 2 A (producer ŠMERAL Brno, plant Hronov), with nominal energy of 20 kJ working pressure of 16 MPa and 30 kW electric power.
|
|
| |
|
|
Production technology of part OPENER
Němeček, Tomáš ; Kopřiva, Miloslav (referee) ; Novotný, Karel (advisor)
The project elaborated in frame of bachelor’s studies branch B-STG is submitting design of technology production of the cutting – a part made of steel plate S235JR (ČSN 11 375). Pursuant to of the literary pursuit a problem of the cutting technology and calculation was designed shearing on the follow cutting tool. The instrument make use of standardized components and it is adapted to attached into the press LEN 40 C (producer TOMA INDUSTRIES), with nominal tensile force 400 kN. Blanking punch and blanking die are made of alloyed instrumental steel 19 436.9 (POLDI 2002), heat-worked according to drawing documentation.
|
guest ::
RSS feed.