|
|
Trolley for manipulation
Jílek, Josef ; Nevrlý, Josef (referee) ; Brandejs, Jan (advisor)
This Bachelor thesis deals with solution of interoperative material transport and design of trolley for manipulation of flooring rolls. The trolley was designed with the aim to increase safety and simplify the manipulation. It is simple welded frame made of metallurgical products. The trolley was designed to transport rolls with weight about 150 kg. Factor of safety was 23,5. It means that the construction of frame is well-dimensioned. This thesis also includes complete drawing documentation
|
|
|
Rebuilding of VUT 051 RAY into twin-engine conception
Jílek, Jan ; Mališ, Michal (referee) ; Píštěk, Antonín (advisor)
The master’s thesis is dealt with the design of rebuilding of VUT 051 RAY which is equipped electric powerplant to twin-engine conception named VUT 051 RAY-DUO. In the thesis was verified the range of centre of gravity position of VUT 051 RAY-DUO then powerplant in ducted fan configuration was designed, performances of the airplane were appointed and controllability during fail one of the engines was analysed. The design of new powerplant was verified by strength analysis and then costing calculation was established.
|
|
|
Apartment building
Jílek, Jan ; Kervitcer, Marek (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor's thesis is the design of a new building of a detached residential building in Zábřeh. The form corresponds to the project documentation for the building permit. It is a two-storey, basement building with a flat roof based on the base passages. On the above floors are 5 residential units for 12 people. In the 1st floor there is an apartment with barrier-free access. A stroller storage and a cleaning room are available for all users in 1st floor. In the basement there are cellars for all apartments, a boiler room and a common dryer. Parking is done in front of a building on a paved surface. The construction system is a two-way brickwork of the Porotherm masonry elements except for the perimeter masonry, which is made of a reinforced concrete system. The ceiling structure is made of Miako brick inserts and ceramic concrete ceiling POT beams. The whole object is insulated with a certified thermal insulation system.
|
|
|
Business Cards Generator
Jílek, Josef ; Vlk, Jan (referee) ; Chudý, Peter (advisor)
In these days, business cards are a natural part of the professional and personal lives and fulfills the role of carriers of essential information. This work deals with the creation of web applications, through which everyone can easily create business cards by using predefined templates. It also will serve as simply assistant of designers to obtain a homogeneous data for creating business cards set of company.
|
|
|
Steel structure of an industrial building
Jílek, Josef ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
This thesis deals with structure of the single-aisle steel industrial hall in accordance with the arrangements of the building with a span of 30 m, a height of 84 m and corresponding height of the cantilever of a crane track girder is 9,0 m. In the hall are considered two cranes with a capacity of 50/12,5 t and 32/8 t. The main bearing element is formed by lattic truss stored on solid pillar down anchored in transverse direction. Distance of transversal pillars is 12 m and between them designed hanging purlins. The structure is designed for the district of Brno.
|
|
|
Building B3 of the Sadová residential complex - building technology project
Jílek, Jan ; Valenta, Michal (referee) ; Biely, Boris (advisor)
The subject of thesis is construction technological project of B3 object, aiming at apartment building, which is the main building object. The apartment building consists of four above-ground floors and is established on foundation strips. The principal of thesis elaboration is the budget of the main object and the construction schedule. The diploma thesis also deals with the draft of construction site equipment for particular steps of construction, the construction organization, the lifting mechanism design, the technological regulation for selected operation, the transport accessibility and the protection of health and safety at work taking into account environmental protection.
|
|
|
Economic benefits of riveting in light aircraft production
Fridrich, Jan ; Jílek, Jan (referee) ; Podaný, Kamil (advisor)
The thesis deals with the comparison of conventional riveting technology with riveting that uses hole-to-hole technology for the preparation of a semi-finished product on a small all-metal ultralight aircraft, specifically on an aileron. The comparison was performed on the ultralight aircraft EV-97 Eurostar SLW (conventional riveting technology) and Alto NG (H2H technology). The comparison of the two methods showed that the time saving for H2H technology is 32,612 min (50%) and the cost price is 600 CZK cheaper compared to the conventional technology, which is, however, easier to produce the semi-finished product.
|
|
|
Technological stage of roofing the winter stadium in Vyškov
Novotná, Nicolette ; Jílek, Jan (referee) ; Diaz, Yvetta (advisor)
The bachelor's thesis deals with the technological process of roofing the ice surface at the winter stadium building in Vyškov. It is a system arch construction. The work contains a technical report focusing on the given stage, budget, technological regulation, construction site equipment, machine design, time schedule and other technical documentation according to the assignment.
|
|
|
Technological solution of the substructure of the train wash tank in Havlíčkův Brod
Švec, Jakub ; Jílek, Jan (referee) ; Mohapl, Martin (advisor)
The subject of this bachelor’s thesis is the processing of the construction and technological solution of the substructure of the train wash unit in Havlíčkův Brod. The thesis deals with technological regulations for earthwork and the implementation of footings. An inspection and test plan is prepared for the technological regulation for earthwork. The time schedule and itemized budget is for the entire substructure. In addition, there is a coordination situation, a technical report on the construction site equipment, a design of the machine assembly, an accompanying report, a solution to wider traffic relations and safety and health protection at work.
|
|
|
The design of an accurate rain gauge with the ability of real-time reading
Jílek, Jiří ; Mašek, Pavel (referee) ; Možný, Radek (advisor)
Rainfall estimation using point-to-point microwave links is a promising way to expand the rain gauge network in the future. However, this opportunistic measurement method is still in the research phase and faces several problems. This paper focuses on one of the problems of this research area, namely the insufficient number of existing rain gauges on the path of the microwave link for the correlation of measured data, by designing a portable rain gauge using data transmission to a remote server using narrowband internet of things (NB-IoT ) technology. To expand its capabilities, the device is also equipped with temperature sensors and a light level sensor. The device is designed with an emphasis on desirable low energy consumption, as it should be able to measure data even without the reach of the electrical network. The outcome of this work is the verification of the functionality of the device in a real environment and the evaluation of its suitability for the intended use case.
|
guest ::
RSS feed.