|
|
Detached house on a sloupe
Vincenc, Lukáš ; Vaněk, Vojtěch (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor thesis is design documentation for construction of family house. House is designed for permanent housing for family of four members. The building has one above-ground and one underground floor, which is set into the slope. The plan of the house is T-shaped. Vertical circumferential and supporting constructions are designed according to Porotherm system and are equipped by contact thermal insulation system. Horizontal load-bearing structures are made of reinforced concrete. Roof construction of the object is composed by shaped roof.
|
|
|
Detached house with a workshop
Kynclová, Eliška ; Vaněk, Vojtěch (referee) ; Utíkalová, Ivana (advisor)
The subject of this bachelor´s thesis is design documentation for construction of family house with parlor. House is designed for family of five members. The family house is located on a flat plot. The building has ground floor and basement. The building has a partial basement with two above-ground floors. The object is based on basic passports. The vertical perimeter structures are designed from the Porotherm system. Horizontal load-bearing structures are made of reinforced concrete. Roof construction of the object is composed by flat roofs and shaped roof. Drawings were worked out in software Archicad.
|
|
|
Vertical green walls
Utíkalová, Ivana ; Dulenčín, Juraj (referee) ; Novotný, Marek (referee) ; Košíčková, Ivana (advisor)
ABSTRACT The concepts of vertical gardens, vertical walls, green walls, living walls or green faca-des can be referred to as vertical plantations for planting the walls or columns of various objects. They are defined under the name of vertically situated plant plantings, which, according to the used plant taxa, can be applied both indoors and outdoors. Contemporary architecture is increasingly looking for ways to return greenery to human settlements, and vertical gardens are one of the solutions that can respond to the lack of free space for greenery, especially when solving development within settlements and return at least part of nature to the interior of cities and municipalities. Last but not least, the system solutions of vertical gardens for the creation of vegetation vertical walls in the interior and on the facades of buildings offer the possibility of making vari-ous and architecturally interesting areas, permanently overgrown with vegetation. The dissertation deals with the topic of greening facades, especially using systems not associated with open ground - the so-called vertical gardens. Since the knowledge on this issue is still poorly documented and the implementation of green facades of the-se systems in our country is not much, based on these facts, I decided to create my own real model of the facade system of vertical vegetation walls in the climatic conditions of the Czech Republic with local taxa. plants. In the initial phase of the work, an analysis of the available green wall systems is performed and a planar panel of the vertical green wall is designed. In the next phase, the influence of these walls on the temperature of the perimeter cladding and the surroundings of the building in comparison with the fa-cade without greenery is verified by monitoring the growth of plants and measuring the temperatures on the green facade of a specific building. The evaluation of the experiments and the acquired knowledge provided informati-on on how t
|
|
|
Accommodation
Kabátová, Eliška ; Šobrová, Zdena (referee) ; Utíkalová, Ivana (advisor)
The subject of the diploma thesis is technical part of the project documentation for the new accomodation facility in the city of Znojmo in the cadastral area of Znojmo. The building is a three-storey, partly basement. The roof of the house is build as a flat roof. The building is created of clay blocks and permanent formwork. The ceilings are made by reinforced concrete slabs. The object is situated on a flat terrain. On the first floor, there is a main entrance, a reception, a dining room, a kitchen, atechnical facilities for the stuff, storage areas. On the basement, there is a technical background of the building. Rooms for guests are located on the first and second floor.
|
|
|
Administrative building
Zajícová, Dagmar ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
The subject of the diploma thesis is the elaboration of project documentation for the construction of administrative building in Brno. The main entrance to the building is oriented to the south-east. The building is L-shaped and it is designed as a two-storey, partly with a cellar. The perimeter bearing masonry of the above-ground floors is designed from ceramic blocks of thickness 300 mm and the internal bearing masonry of thickness 250 mm. After that the basement masonry is made of concrete blocks thickness 300 mm cast in concrete. Internal non-bearing masonry made of ceramic blocks thickness 115 mm. The insulation of the building is designed as a certified contact insulation system of EPS material. The horizontal bearing structures are designed as a ceramic prefabricated rib-and-filler floor with concrete grout. The stairs are designed as reinforced concrete monolithic. The roof is warm flat roof with an extensive vegetation layer.
|
|
|
Small apartment house
Doseděl, Adam ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
This thesis describes the design of small apartment building in Prostějov. It is a detached building with basement. The apartment building has one basement and four above. Consists of a total of 15 residential units. On first floor are situated three flats and on second, third and fourth floor are four residential units. The building is designed of structural systém of ceramic blocks. The ceilings are from monolithic and the roof is designed as a pitched roof. The work includes project documentation for the construction.
|
|
|
Municipal office
Stejskal, Vojtěch ; Utíkal, Aleš (referee) ; Utíkalová, Ivana (advisor)
This project designs a new administrative building, which will serve as a municipal office in Postřelmov. The building structure is made as a masonry construction with ceiling construction of prestressed panels Spiroll. The building has two floors and partial basement coverage as well. The building is covered with a flat roof. The building is provided with two sheltered parking lots.
|
|
|
Detached house with design office
Stejskal, Vojtěch ; Jelínek, Petr (referee) ; Utíkalová, Ivana (advisor)
This project designs a new building of a family house with a design‘s office. The building is single-storey with a residential loft, without a basement. Part of the ground floor is an establishment (office), the rest of the house has residential function. The house has also a garage. It is a brick building (POROTHERM system) with a gable roof; the garage has a flat roof.
|
|
|
Apartment house
Havlíček, Jakub ; Vacenovská, Veronika (referee) ; Utíkalová, Ivana (advisor)
This bachelor thesis deals with the project of two apartment blocks “A” and “B” in the village Rudíkov. These two objects are located in sloping terrain and both have two floors aboveground and one floor underground. In the apartment block “A” there are six apartment units aboveground and four garage units and storage area underground. In the apartment block “B” there are eight apartment units aboveground and two wheelchair accessible apartments with common storage areas underground. The objects are designed from a construction system made of ceramic blocks. The ceilings are monolithic and the roof is hipped with trusses. The thesis provides documentation for realization of the construction.
|
|
|
University dormitory
Glogarová, Tereza ; Stavinohová, Jana (referee) ; Utíkalová, Ivana (advisor)
The new building of a university dormitory with workshops is the content of the presented thesis. The building consists of fifty-two beds for students’ accommodation with complete equipment in eight cells, three workshops and a technical support. This is a combination of reinforced concrete prefabricated skeleton and classical masonry building construction with insulation. The building has four floors. It is designed as seven towers with flat roofs, which protrude from a ground floor with a vegetative roof. Paved and parking areas are adjacent to the building. The project is designed into an urban area of Nový Jičín. Glass atrium and overall shape solution are the distinctive features of the proposal.
|
guest ::
