|
| |
|
|
Family house
Nedělka, Luděk ; Žižková, Lucie (referee) ; Brukner, Bohuslav (advisor)
This bachelor thesis presents a design of a a family house for 4 -5 member family with multifunctional basement, housing a small shop. The house is situated in Žďár subdivision „Klafar“. The house is designed as a two-storey house with a flat roof and a partial basement. Both inside and outside the house, the design respects different levels of the ground around. The house is divided into a living area and a multifunctional area. The multifunctional part of the house is situated in the basement where there is also a garage for two cars, a furnace room and a recreation room. The ground floor is intended as a daytime area and it is suitable for family activities. The first floor with bedrooms is intended as a place to sleep and relax. The entrance into the family house is designed on the ground floor, from the southwest side. The entrance into the multifunctional area is designed in the basement, from the northwest side. The house is built on a concrete base platform supported by foundation structure. The basement is made of lost form construction filled with concrete, the ground floor and the first floor are made of ceramic blocks. Exterior walls are insulated with ETIC mineral wool panels. The roof is designed from prefabricated extensive green roof trays. Analysis of thermal and mechanical properties of the house and fire safety report on the building solution is also a part of this bachelor thesis.
|
|
|
Family house
Nejedlý, Adam ; Svobodová, Sylvia (referee) ; Matějka, Libor (advisor)
This bachelor thesis is focused on a design of a single-family house suitable for four to five permanent residents. The object is situated on an almost flat-surfaced lot on Růžičkova street in Třebíč. The house has two above ground floors and one underground floor. Plan dimensions of the house are 15,85 x 11,85 m. A garage for single vehicle is a part of the building. The roof is constructed as a single flat roof. The object is designed using a technology of Porotherm system except from the basement perimeter walls made of concrete blocks. The thesis also provides a project documentation for a construction including five constructional details, fire safety, thermal engineering, and acoustic solutions. The project documentation had been elaborated in an educational version of ArchiCAD program.
|
|
|
Bone porcelain based on Calcium Aluminous Cement
Němec, Tomáš ; Nevřivová, Lenka (referee) ; Sokolář, Radomír (advisor)
The Main goal of this bachelor´s thesis is to review qualities of bone china with using of aluminous cement for preparation of porcelain bodies. The theoretical part describes the issue of production of bone china and the use of aluminous cements. Besides that there are shown ways of examining porcelain bodies and description of traditional feldspar porcelain and bone china. In practical part of my thesis I compared final properties and mineralogical composition of the traditional feldspar porcelain, bone china and bone china based on aluminous cement.
|
|
|
Pedestrian bridge in Staré Město
Němec, Martin ; Zich, Miloš (referee) ; Koláček, Jan (advisor)
Bachelor’s thesis “Pedestrian bridge in the village Staré Město” is focused on reinforced concrete of pedestrian bridge for walkers and bikers. The pedestrian bridge we can find on the river called Krupá. The structure is considered as a frame. The goal of the work is suggest a horizontal part of the frame and supporting wall. Calculations were made in the program called Scia Engineer. Appraisals were made by hand.
|
|
| |
|
|
Family house
Netočný, Marek ; Svobodová, Sylvia (referee) ; Matějka, Libor (advisor)
Bachelor thesis deals with a project documentation of family house. Location in Litvíno-vice. The object is situated in the regional development. The object is designed as a three-storey, with basement, from the system Porotherm. The roof is flat, single casing. Object has a shape of rectangle.
|
|
|
Family House
Němečková, Monika ; Stodůlka, Jindřich (referee) ; Košíčková, Ivana (advisor)
The aim of the bachelor's thesis is to design a family house. This is the one-generation family house in the village Veverské Knínice. The building is designed as a new building with basement, ground floor and attic. Wall system consists of a ceramic tile Porotherm. The ceiling construction is from Porotherm Miako. The roof is gable.
|
|
|
Family house with a brewery T: O: P in Jevíčko
Němeček, Pavel ; Vávra, Petr (referee) ; Brzoň, Roman (advisor)
Bachelor´s thesis is focused on a project of a detached family house with a brewery T:O:P on a site 88/13 and 88/14 in a Jevíčko. Bachelor´s thesis is drawn in a project documentation for the realization of building. The house has two floors without cellarage, rectangular plan with flat roof, based on strip foundations made of a simple concrete. Vertical frameworks are devised from masonry type therm from Porotherm. Horizontal frameworks are from ceiling panels Spiroll. External wals are warmed by a contact system from polystyrene. Entry into the brewery premises and residential units, located on the second floor, is oriented to the southeast, entrance to the brasserie on the southwest. 1.NP is divided into two service. The service brewery with his technological background and administrative background brewer. The second service is brasserie brewery with his social service and visitors. Housing unit is separated from the brewery and brasserie ceiling constructions and has its own entrance from the open air.
|
|
|
Diagnostic methods for the evaluation of the state of timber structures
Nguyen, Martin ; Anton, Ondřej (referee) ; Heřmánková, Věra (advisor)
This bachelor‘s thesis is focused on description and evaluation of selected diagnostic methods used for a survey of timber structures. The first part describes the structure and properties of wood, damaged by external factors and protection. Another part provides a description of non-destructive, semi-destructive and destructive methods of diagnosis. The practical part applies the selected diagnostical methods on specific particular element of a wooden construction. The aim of this bachelor’s thesis is to become familiar with the survey proces timber elements, verification and their application in practice.
|
guest ::
RSS feed.