|
| |
|
|
SMV-2023-63: Measuring interferometric systems
Mikel, Břetislav
The contract research was focused on the development of multi-axis measuring systems using the most accurate method of measurement based on the principle of laser radiation interference. The basic reference is a laser source with a wavelength of 633 nm. Measuring systems are intended for devices requiring measurement accuracy in the order of nanometers.
|
|
|
SMV-2023-62: Optical beam head A
Mikel, Břetislav
A feasibility study for the development of the principle, arrangement and verification of an optical head for 637 nm wavelength, which will have an input adapted to the FC/PC fibre connector, with an output laser beam focused at a distance of 400 mm with a width of 6-10 mm, a thickness of max. 60 um and a depth of field of min. 5 mm.
|
|
|
SMV-2023-61: Measuring systems for lithographers
Mikel, Břetislav
The contract research was focused on the development of multi-axis measuring systems using the most accurate method of measurement based on the principle of laser radiation interference. The basic reference is a laser source with a wavelength of 633 nm. Measuring systems are intended for devices requiring measurement accuracy in the order of nanometers.
|
|
| |
|
|
Middle-level control of FB-MMC converter in Delta connection
Kokeš, Petr
Control of a modular multilevel converter (MMC) is technically far more complicated than control of a standard 2-level converter. It is not only because of a great number of series-connected cells. For a MMC converter we need to cope with another control level (mentioned here as the middle-level control), which means balancing of voltages among MMC branches and the control of currents circulating inside this converter. For the Delta connected MMC with full H–bridge (FH) cells a convenient method for voltage balancing among all three MMC branches has been analysed and the appropriate control structure has been designed. Then the functionality of this balancing method has been verified using computer simulations and also tested with two MMC physical models operating as active power filters on 400V and 6kV grids.
|
|
|
SMV-2023-59: Programmable acquisition system AQS-PG V2.0
Vondra, Vlastimil
Assessment of the equipment specification in terms of the equipment implementation possibilities using the contractor's instrumentation. Analysis of the requirements of the assignment and development of the generator solution methodology. Preparation of a proposal for implementation according to the desired characteristics. Manufacturing mechanical and electrical parts and purchasing the necessary components. Verification of theoretical initial requirements by practical measurements at a designated location. Assembling 1 piece of experimental equipment. Installation, calibration of equipment at the filling site. Operator training at the client's.
|
|
|
SMV-2023-58: Design of Electron Optical Elements
Radlička, Tomáš
The contractual research covered design of new genration of secondary electron detector for the multibeam scanning electron microscope. We also calculated the electron optical properties of NiCol column with hexapole corrector of spherical aberration.
|
|
| |
|
|
SMV-2023-52: Full servis of Dewar vessels for liquid helium
Srnka, Aleš ; Krejčí, Pavel
The goal of the research is optimalization of operation of Dewar vessels with economical profitability and security during permanent changes of operating conditions. All important data are tracked for a long time and using is optimalized to achieve the smallest loses. We use long time know-how in the field of cryogenics and our specialized cryogenics equipments and apparatuses.
|
guest ::
RSS feed.