|
Principals, switching functions and routing techniques in computer networks
Dvořák, Pavel ; Pelka, Tomáš (referee) ; Polívka, Michal (advisor)
This bachelor thesis consider main principles and function of active network components. Mainly is intent to component working on the third level of referential model ISO/OSI, router. There are described its main parts and more closely charactered routing protocols. Then is verified the ability of dynamic routing to react to failure in the network and there is measured the reaction time of crossing to secondary route when using different routing protocols. Another part of the thesis is focused on the questions of Quality of Service (QoS) and its support in computer networks. There are explored various ways of the QoS configuration on the routers and the proper of them is chosen and applied to the test network.
|
|
Computer design of the small CATV
Sedláček, Jan ; Slanina, Martin (referee) ; Říčný, Václav (advisor)
Main task of this bachelor’s thesis is to create an interactive automatic programme for designing circuits of individual or small common television aerial. The first part of this document describes main conceptions distribution of television signals, parameters of coaxial cable and also some kinds of signals distortion. There are described some important mathematics formulas used for calculation of coaxial cable attenuation and carrier to noise distance important for computing function of programme. The second part describes a procedure of designing of television cable circuit of individual or small common television aerial and includes prototypal calculation of two real circuits and its comparison with results of computer calculation by which correct function of programme is verified. A part of this document is also made by detailed description of programme and its functions. Source code of created programme is included in the end of this document.
|
|
Program for design of CATV
Sedláček, Jan ; Hála, Ondřej (referee) ; Říčný, Václav (advisor)
The main task of this master’s thesis is to create an interactive computer programme for the design of small and medium television cable circuits. The first part of this document describes main conceptions of a modification and a distribution of television signals. There are also introduced basic topologies of small and medium sized distribution networks, some passive and active elements in the circuit including their usage. There is also described an algorithm for calculation of circuit’s values. The second part contains a detailed description of created programme with all of its functions. A part of this document is made by a sample calculation of the four variants of circuit and its comparison with computer calculation. In suplement are included selected parts of source code.
|
|
Verification of parameters of passive optical components on short wavelengths
Látal, Michal ; Filka, Miloslav (referee) ; Vojtěch, Josef (advisor)
Semestral thesis deals with the basic theoretical knowledge in the field of optics, light propagation and optical fibers. It describes in detail the optical transmission system and its associated issues, such as the attenuation of optical fibers or differently caused dispersion. The main part of this work is a description of each passive optical elements, their production technologies and applications in optical communications. Within the optical connection its radiation sources and detectors of optical radiation are explained. The last practical part is focused on the measurement of insertion loss provided by passive optical components.
|
|
Switch optimization in converged network
Švec, Adam ; Sobek, Jiří (referee) ; Škorpil, Vladislav (advisor)
Switch Optimization in a Converged Network thesis discusses the role of the Ethernet switch in the network. It describes differences between the switch and the hub in the network and the impacts on the collision domain size. In the converged network, priority data switching according to their origin and thus the qualitative point of view is also addressed - e-mails, voice services and multimedia will each behave differently. A real element, switch L3 - a switch with services quality support - is mentioned. The tool Matlab - Simulink is briefly described and a functional simplified model of the ethernet switch was created. Furthermore, the topic was used as a theme for a laboratory task in the subject Services of Telecommunication Networks. A model for Simulink and an example of the laboratory protocol for the created task are attached to the thesis.
|
|
Design, implementation and measurement of passive optical network
Kužela, Jan ; Horváth, Tomáš (referee) ; Vojtěch, Josef (advisor)
The aim of this thesis is to formulate the design of optical access network in designated area. The design is focused on the physical network layer and it covers optical fibers, cable protectors and links, optical hubs, racks and active components. The thesis also docu- ments network architecture, the configuration of active components and provides results from monitoring of selected network segments. The thesis consists of the theoretical part and practical part. In the theoretical part, there is an introduction to optical networks, their configurations (FTTH, FTTB, FTTC, FTTN), relevant networking standards and technologies. The practical part of the thesis covers design proposal of a network located in Slavičín. The design reuses infrastructure and technologies of existing network. The proposed design follows FTTH architecture which has benefits of low maintenance cost and it also fulfills GPON standard.
|
|
New laboratory exercises in OMNeT++ network simulator
Vlašín, Martin ; Polák, Josef (referee) ; Langhammer, Lukáš (advisor)
Diploma thesis deals with creating four laboratory tasks using simulation tool OMNeT++ and Inet Framework extension. Subject matter of these designed tasks is focused on routing protocols, providing quality of service, computer networking technologies used in local area networks and comparison of active networking devices. First task contains the comparison of behaviour and routing techniques between protocols RIPv2 and OSPFv2, including the effect of dividing OSPF network into smaller areas. Second task is focused on various techniques for controlling quality of service, namely FIFO queue, PQ and WFQ. Main goal is the comparison of results, that define quality of network services. Third task compares networking technologies, Ethernet and WLAN, parameters of transmission. Fourth task offers comparison of networking devices, hub, switch and router. This paper also contains required theory of network technologies and software tools used for executing simulations.
|
|
Laboratory exercise: Modeling of photonic communication networks
Kovaříková, Hana ; Horváth, Tomáš (referee) ; Münster, Petr (advisor)
The bachelor’s thesis deals with the issue of modern high-speed data networks and their simulation in the MATLAB Simulink environment. The theoretical part is devoted to optical networks, fibers, their properties and standards. The thesis also explains the subject of passive and active optical networks, including their components. Laboratory tasks are devoted to the simulation of the transmission of a passive optical network with a splitter and an active optical network with an amplifier.
|
|
Verification of parameters of passive optical components on short wavelengths
Látal, Michal ; Filka, Miloslav (referee) ; Vojtěch, Josef (advisor)
Semestral thesis deals with the basic theoretical knowledge in the field of optics, light propagation and optical fibers. It describes in detail the optical transmission system and its associated issues, such as the attenuation of optical fibers or differently caused dispersion. The main part of this work is a description of each passive optical elements, their production technologies and applications in optical communications. Within the optical connection its radiation sources and detectors of optical radiation are explained. The last practical part is focused on the measurement of insertion loss provided by passive optical components.
|
|
Design, implementation and measurement of passive optical network
Kužela, Jan ; Horváth, Tomáš (referee) ; Vojtěch, Josef (advisor)
The aim of this thesis is to formulate the design of optical access network in designated area. The design is focused on the physical network layer and it covers optical fibers, cable protectors and links, optical hubs, racks and active components. The thesis also docu- ments network architecture, the configuration of active components and provides results from monitoring of selected network segments. The thesis consists of the theoretical part and practical part. In the theoretical part, there is an introduction to optical networks, their configurations (FTTH, FTTB, FTTC, FTTN), relevant networking standards and technologies. The practical part of the thesis covers design proposal of a network located in Slavičín. The design reuses infrastructure and technologies of existing network. The proposed design follows FTTH architecture which has benefits of low maintenance cost and it also fulfills GPON standard.
|