|
|
Substances
Zadražilová, Lenka ; Písaříková, Jana (referee) ; Fexová, Patricie (advisor)
The thesis is part of a long-term project in which I focus on dust. The scope of this material is, however, narrowed down and the thesis comes to a point where the focus is on only one kind of dusty substance – wood dust, sawdust, or wood in general. The series of paintings with the motif of wood, which is applied with sawdust on wooden boards, does not only thematize a certain form of dust, but also a certain linguistic category and experience with wood, or the experience of working with it, developed since the time of my childhood because of living in a carpenter's family. The thesis contains a combination of painterly and conceptual starting points, drawing on and benefiting from the experience of earlier artwork on a dust project.
|
|
|
Pension
Koršala, Martin ; Řezníček, Petr (referee) ; Hradil, Dušan (advisor)
The subject of this final thesis is the preparation of a project documentation for the building construction of a new pension with restaurant and wine cellar. The compound is located in Vážany nad Litavou. Its location falls under Velké Pavlovice area. Due to the location in this wine-growing region is in the project located, a wine cellar with a vineyard. The project is designed as a guesthouse with the restaurant designed for families with children, and for holding small social or company events. For this purpose, is in the main building designed a lounge with capacity of 20 people and a restaurant with capacity of 60 persons. The accommodation capacity provided in the pension is 43 beds. Pension offers background designed for relaxation or wellness stays thanks to the sauna and whirlpool. The building has rectangular plan on two basements and two above-ground floors with a mono-pitched roof facing south. This makes it possible to use solar power from the roof and south-facing facade. Water from the roof of the building is collected in a small pond, which serves as a storage reservoir useful in case of fire and vineyard irrigation. Near the building there are paved and parking areas.
|
|
| |
|
|
Industrial bakery Herold Brno
Soška, Jakub ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Donaťáková, Dagmar (advisor)
The aim of this work is to project documentation, which consists of documentation for building permits in 1: 100 scale and documentation for construction in 1:50 scale. The work is based on architectural studies prepared in the course AG35. The subject of the thesis is the solution of new industrial bakeries Herold in Brno in Horní Heršpice on the street K Terminálu. The solution includes both industrial building itself and its surroundings. The basic idea was the breakdown of the three basic longitudinal masses into smaller parts. They create the impression folded structures from individual blocks. The blocks are separated by a narrow alley, which is located in the roof blocks embedded in the mass. The overall appearance of the industrial bakery is also supported using cassette facade system on the front blocks.
|
|
|
Sports and cultural centre, Otradov
Myška, Jan ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of this diploma thesis is the preparation of project documentation for the implementation of new sports and cultural centre Otradov. The dominant feature of the complex objects stands and multipurpose hall. The building is architecturally designed with an effort to fit in too much of rural architecture. Multipurpose hall has two floors, one third roofed flat roof, two-thirds of the roof ridge. The core system is aerated concrete blocks. The building is two-storey grandstand with the carrier deck. Roofing is solved by means of broken wooden beams. Sanitary facilities is dealt wall system and roofed shed roof. Athletics track, the surface of the polyurethane mixture designed for sports.
|
|
|
Detached House with Wine Cellar
Duchoň, Roman ; Šibal, Jan (referee) ; Králová, Zuzana (advisor)
Bachelor’s thesis is focused on solving project documentation detached house with a wine cellar. The building is designed with three floors, partial basement, dissected plan. Part of the roof is flat, second part is pitched and third part is gabled. The building is made of bricks. It is used building systém HELUZ for vertical structures. The ceiling are made of reinforced concrete.
|
|
|
Calibration of Surveillance Camera
Pištělák, Radek ; Hradiš, Michal (referee) ; Herout, Adam (advisor)
This work aims the issue of calibration of cameras, more precisely surveillance cameras, that monitor Ćat areas such as car parks. The calculation is based on several measurements of the same distance over the entire Ąeld of camera view. From the obtained set of measurements, the properties of the camera are calculated so that it is able to measure distances. With this approach, an error of 1.6 % was achieved, which was calculated by substituting back into annotated and unannotated images in the main experiment. The result of the work is a way to calibrate the camera with a view of large spaces, for which other methods of calibration could be difficult.
|
|
|
Rebuilding of family house at vacant lot
Nevrlý, Jaroslav ; Hubáček,, Petr (referee) ; Hubáčková, Blažena (advisor)
Project documentation addresses the single-family house. It is a terraced houses.The building has three floors. House is a no basement with flat roof and shed roof. The structural system consists of a vertical brick wall of ceramic bricks and reinforced concrete columns. Ceilings, beams and ceramic inserts. The roof is asingle casing. The construction is based on strip foundations and footings.
|
|
|
Processing of data from 3D scanner
Ječmínek, Tomáš ; Janda, Marcel (referee) ; Kuchyňková, Hana (advisor)
This work deals with the particular case of 3D scanning applications ZScanner 800. In bachelor work there was measured an fan geometry of induction engine. This geometry was subsequently adjusted using Geomagics. In parallel of these operations there were created 3D models of fan in SolidWorks program. The scanned surfaces and 3D fan model were used for dimensional analysis program in Geomagics.
|
|
|
Nursing home
Pella, Radim ; Lužný, Václav (referee) ; Müller, Jan (advisor)
This thesis deals with the Nursing home in the city of Prostějov. The object includes 36 one room flats and 2 three room flats. There are proposed another equipments which are related to nursing services such as two surgeries, rehabilitation, massage salon, coffee bar and hairdressing salon in the building. The hole building was designed as accesible. The object is two storied, cellarless and its grand plan is indented. It is staffed on plane plot in a quiet area of apartment blocks. There are going to be build new road, parking places and surfaces outside. The roof is designed as flat single casing or double casing. The main structure system is designed as walls of ceramic blocks and ceiling of reinforced concrete. All of the flats are situated on the southern side and the entrances are situated on the northern side.
|
guest ::
