|
|
Mechanical design of mobile camera system via electric drive
Bosák, Dalibor ; Brandejs, Jan (referee) ; Paloušek, David (advisor)
This bachelor thesis deals with an overview of accessories for a camera movement and mechanical design of a mobile camera crane via electric drive. In the construction part of the thesis are primarily brought conception designs of a camera crane including stress analysis in each places of the crane and then the proposal itself according to the chosen concept. There are shown solutions of individual parts of the camera crane with their description and views. In the end of the thesis are resumed the advantages of the design and economical analysis including the prices of each components and the whole crane.
|
|
|
Camera Positioning Device
Berčík, Vojtěch ; Toman, Marek (referee) ; Červinka, Dalibor (advisor)
This master’s thesis deals with the design of a drive for a camera positioning device that could be used for shooting videos and timelapses. The optimal drive and power supply as well as the steering program based on the Arduino platform program are developed. The construction prototype adapted for printing at 3D printers is also designed. The whole system is then produced and tested.
|
|
|
MultiCopter Design
Picek, Matěj ; Pelikán, Petr (referee) ; Zdařil, Zdeněk (advisor)
In my work, I focused on the design of an electric multicopter for common and advanced users. The main objective was to bring a simple practical solution to the dron, which will correspond to the current functional and aesthetic standards of industrial design in the aircraft industry. Whole concept of the dron is designed to be as user-friendly as possible. Thanks to its simplicity, small dimensions and dron structure, it takes a minimal transport space and is almost instantly ready for use.
|
|
|
Independent Positioner Controlled by Microcontroller
Bordovský, Tomáš ; Povalač, Aleš (referee) ; Šebesta, Jiří (advisor)
The project is focused on an analysis and design of an autonomous positioning system with high precision for an astronomical telescope or another device. Although, there are already such devices in the market, so they are too expensive for common people. These systems are used in the astronomy, radio-amateur communication and robotics or for optimum positioning of the solar panel. In this paper, requirements on construction of system working in wide range of conditions, electronic subsystems, control algorithms, and calibration method are analyzed. There are also complete circuit diagrams and printed circuit boards, also the built-up parts of the positioner are presented.
|
|
|
Nature: The second home of Marián Polák
Lišková, Michaela ; Štoll, Martin (advisor) ; Novotný, David Jan (referee)
This bachelor thesis is divided in two parts - the theoretical one and the practical one. The practical part named Příroda: Druhý domov Mariána Poláka is a documentary TV portrait about czech documentarist Marián Polák, who as almost the only one in the Czech republic, is filming natural movies nowadays. He has filmed several documentary movies and shows about nature. He has finished his first feauture film about czech nature called Planeta Česko (2018) last year. The first part of my bachelor thesis is trying to describe Marián Polák mostly as a documentarist. At the same time it shows a difficult process of filming natural documentary. The theoretical part adds facts to the practical one. It analyses documentary and it also tries to define the documentary movie. Briefly it describes the history of the documentary and its origin. The typology of the documentary is shortly covered in the next part of the bachelor thesis. The bachelor thesis characterize the author's type, the moderate type, the performed type and the observe type of document. It mostly shows the natural documentary movie, destinctive the natural documentary movie about animals. The final part of the theoretical bachelor thesis examines documentary of Marián Polák's movies. Keywords Documentary, document movie, Marián Polák,...
|
|
|
MultiCopter Design
Picek, Matěj ; Pelikán, Petr (referee) ; Zdařil, Zdeněk (advisor)
In my work, I focused on the design of an electric multicopter for common and advanced users. The main objective was to bring a simple practical solution to the dron, which will correspond to the current functional and aesthetic standards of industrial design in the aircraft industry. Whole concept of the dron is designed to be as user-friendly as possible. Thanks to its simplicity, small dimensions and dron structure, it takes a minimal transport space and is almost instantly ready for use.
|
|
|
Camera Positioning Device
Berčík, Vojtěch ; Toman, Marek (referee) ; Červinka, Dalibor (advisor)
This master’s thesis deals with the design of a drive for a camera positioning device that could be used for shooting videos and timelapses. The optimal drive and power supply as well as the steering program based on the Arduino platform program are developed. The construction prototype adapted for printing at 3D printers is also designed. The whole system is then produced and tested.
|
|
|
Independent Positioner Controlled by Microcontroller
Bordovský, Tomáš ; Povalač, Aleš (referee) ; Šebesta, Jiří (advisor)
The project is focused on an analysis and design of an autonomous positioning system with high precision for an astronomical telescope or another device. Although, there are already such devices in the market, so they are too expensive for common people. These systems are used in the astronomy, radio-amateur communication and robotics or for optimum positioning of the solar panel. In this paper, requirements on construction of system working in wide range of conditions, electronic subsystems, control algorithms, and calibration method are analyzed. There are also complete circuit diagrams and printed circuit boards, also the built-up parts of the positioner are presented.
|
|
|
Mechanical design of mobile camera system via electric drive
Bosák, Dalibor ; Brandejs, Jan (referee) ; Paloušek, David (advisor)
This bachelor thesis deals with an overview of accessories for a camera movement and mechanical design of a mobile camera crane via electric drive. In the construction part of the thesis are primarily brought conception designs of a camera crane including stress analysis in each places of the crane and then the proposal itself according to the chosen concept. There are shown solutions of individual parts of the camera crane with their description and views. In the end of the thesis are resumed the advantages of the design and economical analysis including the prices of each components and the whole crane.
|
guest ::
