National Repository of Grey Literature 17 records found  1 - 10next  jump to record: Search took 0.01 seconds. 
A computational study on the effects of active flow control to the evolution of the wingtip vortices of a three dimensional wing
Skarolek, Vilém ; Hradil, Jiří (referee) ; Karampelas, Stavros (advisor)
V této diplomové práci byla provedena série numerických výpočtů proudění kolem křídla s aktivním řízením proudu. Výpočty jsou provedeny pro různé úhly náběhu křídla s profilem NACA 0015. Křídlo s zařízením pro aktivní řízení proudu bylo testováno v podmínkách s Machovým číslem M=0,21 a Re= 2500000. Bylo zkoušeno více možných konfigurací s cílem nalézt nejúčinější variantu, která bude zároveň stále energeticky efektivní. Vybraný přístup k aplikaci aktivního řízení na křídle se od ostatních liší. Použito je velkých ploch pro vyfukování vzduchu o nízké rychlosti a zároveň v souvislosti s tím je studována energetická účinnost. Snížení odporu a zvýšení vztlaku je dosaženo změnou řídících veličin. Při určitých specifických podmínkách je zařízení schopno při velmi vysoké energetické účinnosti dosáhnout pro všechny úhly náběhu výrazného snížení odporu, zvýšení vztlaku křídla, nebo obojího zároveň. Maximální pokles odporu křídla na malých úhlech náběhu přesahuje 40% z celkového odporu křídla a stále s dodržením energetické účinnosti.
Numerical Study Of Pulsating Jet At Moderately Small Reynolds Numbers
Dolinský, Jiří ; Doupník, Petr (referee) ; Popela, Robert (advisor)
Tato numerická studie je zaměřená na axisymetrickou pulzní trysku při zachování relativně nízkých Reynoldsových čísel a její fyzikální podstatu, která dosud nebyla zcela vysvětlena. Hlavním cílem práce bylo prozkoumat a zhodnotit vliv přidání periodického komponentu rychlosti ke stacionární složce rychlosti. Nejdříve byl řešen stacionární případ, poté byla do simulace přidána pulzace a byla vytvořena nestacionární simulace. Numerické řešení stacionárního případu bylo ověřeno pomocí asymptotického řešení, které předložil Hermann Schlichting [44]. Přesnost tohoto analytické řešení byla opravena na základě experimentálních poznatků Andradeho a Tsiena [1]. Pomocí této korekce je zmenšena oblast singularity řešení v blízkosti počátku proudění. Z matematického pohledu se v podstatě jedná korekcí prvního řádu, což bylo dokázáno Revueltou a spol [36]. Samotné analytické řešení bylo vytvořeno v MATLABu zatímco pro numerické řešení byl použit software Ansys Fluent. Při numerické simulaci byly Navier-Stokesovi rovnice integrovány ve své plné formě za pomoci algoritmu založeném na tzv. rovnici korekce tlaku. Pulzační tryska byla poté řešena pro různé parametry tak, aby bylo možné zhodnotit vliv jednotlivých parametrů na evoluci takto modulovaného proudu. Nakonec byla posouzena možná aplikace pulzních trysek v průmyslu s ohledem na možnost snížení emisí v průběhu spalovacího procesu.
Geometrical structures and objects from the point of view of their applications in mechanics
Ambrozková, Anna ; Kureš, Miroslav (referee) ; Tomáš, Jiří (advisor)
This Master's thesis relates to continuum mechanics and its connection with selected directions of modern differential geometry, which deal with geometric structures and objects. These are mainly tensors, bundles, varieties and jets. The first part is devoted to the mechanics of the continuum itself and its description in several areas, others deal with mathematical concepts and their possible application in mechanics.
Studium produkce jetů v experimentu ALICE na urychlovači LHC
Kučera, Vít ; Bielčíková, Jana (advisor) ; Dolejší, Jiří (referee)
Title: Study of jet production with the ALICE experiment at the LHC Author: Vít Kučera Department: Institute of Particle and Nuclear Physics Supervisor: RNDr. Jana Bielčíková, Ph.D., Nuclear Physics Institute of the ASCR, v.v.i. Abstract: The theory of strong interaction, quantum chromodynamics, predicts a phase transition between hadronic matter and the quark-gluon plasma where quarks and gluons are deconfined. This state of matter is expected to be created in ultra-relativistic collisions of heavy ions. Jets from partons which interact with the strongly interacting matter created in heavy-ion collisions can be used as probes to study this medium. The ALICE experiment installed at the Large Hadron Collider at CERN enables using jets to study medium in heavy-ion collisions. An analysis of data measured with the ALICE experiment in 2010 in the lead nuclei collisions at energy √ sNN = 2.76 TeV is presented in the thesis. The results of this analysis are presented in a study of jets reconstructed with the kt and anti-kt algorithms. The study includes an analysis of tracks, an analysis of background and focuses on an analysis of inclusive jet spectra. Various aspects of jet spectra are studied including modification of jets in the central collisions expressed by the ratio RCP. Also a summary of author's...
Produkce jetů s velkou příčnou hybností na LHC
Podškubka, Radek ; Kupčo, Alexander (advisor) ; Lysák, Roman (referee)
In the first part of the thesis, theoretical uncertainties of jet cross-section have been calculated for proton-proton collision at the center of mass energy of 8 TeV. For jet identification the anti-kT algorithm with scale parameter R = 0.6 was used. As the calculations showed, the major contribution to the total theoretical uncertainty comes from the uncertainty of parton distribution function parameters. In the second part of the thesis, the angular distribution of dijet events produced in proton-proton collisions at the center of mass energy 8 TeV were simulated using Pythia 8 Monte Carlo event generator. New physics model of quark compositeness that should manifest itself by quark contact interaction was studied using angular distribution of dijet events. Three angular variables were discussed and these variables were used to calculate 95% CL lower limit on contact interaction scale. The results were compared and it emerged that the sensitivity to contact interaction signals varies for these variables.
Studium produkce jetů v jádro-jaderných srážkách na urychlovači RHIC
Barnovská, Zuzana ; Bielčíková, Jana (advisor) ; Tomášik, Boris (referee)
Title: Study of jet production in nucleus-nucleus collisions at RHIC Author: Mgr. Zuzana Barnovská Department: Institute of Particle and Nuclear Physics Supervisor: RNDr. Jana Bielčíková, Ph.D., Nuclear Physics Institute of the ASCR Abstract: The goal of this thesis is to study strange particles (Λ, ¯Λ a K0 S) in jets at the energy of √ sNN = 200 GeV in d+Au and Au+Au collisions measured by the STAR experiment at RHIC in 2007 and 2008. After the application of geometrical and topological limits, jets were reconstructed with the kT and anti- kT jet algorithms and special selection criteria for strange particles were applied. Ratios of the production of strange baryons and mesons in jets were calculated and compared to previous results of inclusive V0 particle production measured by the STAR experiment. Study of centrality dependence of these ratios was performed and compared to values in d+Au collisions. Keywords: jets, d+Au collisions, Au+Au collisions, STAR, RHIC 1
Missing bright red giants in the Galactic center: A fingerprint of its once active state?
Zajaček, Michal ; Araudo, Anabella ; Karas, Vladimír ; Czerny, B. ; Eckart, A. ; Suková, Petra ; Štolc, Marcel ; Witzany, V.
We propose a novel scenario for the bright red-giant depletion based onthe collisions between red giants and the nuclear jet, which was likely active in the Galactic center a few million years ago and could have led to the formation of the large-scaleγ-ray Fermi bubbles. The process of the jet-induced ablation of red giants appears to be most efficient within∼0.04 pc(S-cluster), while at larger distances it was complemented by star–accretion disc collisions and at smaller scales, tidal stripping operated. These three mechanisms likely operated simultaneously and createdan apparent core of late-type stars within∼0.5 pc.
Geometrical structures and objects from the point of view of their applications in mechanics
Ambrozková, Anna ; Kureš, Miroslav (referee) ; Tomáš, Jiří (advisor)
This Master's thesis relates to continuum mechanics and its connection with selected directions of modern differential geometry, which deal with geometric structures and objects. These are mainly tensors, bundles, varieties and jets. The first part is devoted to the mechanics of the continuum itself and its description in several areas, others deal with mathematical concepts and their possible application in mechanics.
Study of hard processes at the LHC
Zívr, Vojtěch ; Spousta, Martin (advisor) ; Faltová, Jana (referee)
There were studied PbPb collisions at a per-nucelon center-of-mass en- ergy of 2760 GeV. Such collisions produce quark-gluon plasma and jets. Specifically, the properties of events dominated by gluon and quark jets were studied. The properties were multiplicity, pseudorapidity and trans- verse momentum. The study found greater multiplicity in events dominated by gluon jets, compared to quark jets. Furthermore, it was found that more electrically charged particles are formed than their electrically neutral part- ners. Examination of pseudorapidity revealed that particles in jets have lower pseudorapidity compared to background. In contrast, no statistically significant differences were observed in the distribution of transverse mo- mentum depending on the type of hadron. 1
Numerical Study Of Pulsating Jet At Moderately Small Reynolds Numbers
Dolinský, Jiří ; Doupník, Petr (referee) ; Popela, Robert (advisor)
Tato numerická studie je zaměřená na axisymetrickou pulzní trysku při zachování relativně nízkých Reynoldsových čísel a její fyzikální podstatu, která dosud nebyla zcela vysvětlena. Hlavním cílem práce bylo prozkoumat a zhodnotit vliv přidání periodického komponentu rychlosti ke stacionární složce rychlosti. Nejdříve byl řešen stacionární případ, poté byla do simulace přidána pulzace a byla vytvořena nestacionární simulace. Numerické řešení stacionárního případu bylo ověřeno pomocí asymptotického řešení, které předložil Hermann Schlichting [44]. Přesnost tohoto analytické řešení byla opravena na základě experimentálních poznatků Andradeho a Tsiena [1]. Pomocí této korekce je zmenšena oblast singularity řešení v blízkosti počátku proudění. Z matematického pohledu se v podstatě jedná korekcí prvního řádu, což bylo dokázáno Revueltou a spol [36]. Samotné analytické řešení bylo vytvořeno v MATLABu zatímco pro numerické řešení byl použit software Ansys Fluent. Při numerické simulaci byly Navier-Stokesovi rovnice integrovány ve své plné formě za pomoci algoritmu založeném na tzv. rovnici korekce tlaku. Pulzační tryska byla poté řešena pro různé parametry tak, aby bylo možné zhodnotit vliv jednotlivých parametrů na evoluci takto modulovaného proudu. Nakonec byla posouzena možná aplikace pulzních trysek v průmyslu s ohledem na možnost snížení emisí v průběhu spalovacího procesu.

National Repository of Grey Literature : 17 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.