|
|
The influence of PEO source on nanofiber layer preparation
Grufíková, Jana ; Knotek,, Petr (referee) ; Knotková, Kateřina (advisor)
The electrospinning process of polymer solutions is affected by many different parameters that can be divided into solution parameters, process parameters, and ambient parameters. This study is focused on characteristics of a polymer and its solution, which are ranging into the solution parameters. The aim of this study is to compare poly(ethylene oxide) characteristics in the relation to electrospinning of hyaluronic acid, to find the difference between them using available analytic, thermic and spectral methods, and to define the influence of properties on polymeric solutions behavior during electrospinning. It was find that poly(ethylene oxides) obtained from two different sources behave differently in an electrostatic field, although their molar mass is declared as the same. It was also confirmed that the electrospinning process of polymeric solutions is affected mainly by their viscosity and conductivity. This two properties are determined especially by the molar mass of polymer and also by the content of impurities or content of some another polymer during electrospinning of mixed solution.
|
|
|
Preparation of nanoparticles and nanofibers with antimicrobial components
Sosková, Simona ; Veselá, Mária (referee) ; Skoumalová, Petra (advisor)
The presented diploma thesis is focused on the preparation of new materials with antimicrobial effect. Liposomes and nanofibers from polyhydroxybutyrate containing clotrimazole and natural extracts with good antifungal and antioxidant effects were prepared. The theoretical part contains examples and short description of using nanoparticles and nanofibers in cosmetics and medicine and the description of plants which have positive and potential antimycotic effects. Moreover, methods for particles and fibers characterisation were shortly described. In the experimental part, natural water and lipid extracts were prepared and spectrophotometrically characterised for the content of polyphenols, flavonoids and the antioxidant activity. Liposomes and liposomes containtng PHB were prepared from selected extracts and the encapsulation effectivity, shortterm and longterm stability via determination of polyphenols were determined. Prepared particles were characterized with DLS method (size) and zeta- potential (stability). PHB nanofibers functionalised with selected lipid extracts and clotrimazole were prepared via electrospinning and forcespinning, and examined via FLIM and FTIR-ATR methods and spectrophotometry was used for antioxidant activity and release of active substances determination. Antifungal properties of prepared particles, extracts and fibers using the test system Candida glabrata were studied. Finally, cytotoxicity of selected samples was tested with MTT assay using human keratinocytes.
|
|
| |
|
|
The Rheological Behavior of Polymer Solutions Suitable for Electrospinning
Divínová, Nikol ; Voráč,, Zbyněk (referee) ; Chamradová, Ivana (advisor)
This diploma thesis deals with preparation and characterization of aqueous solutions of polyvinyl alcohol suitable for electrospinning. In the theoretical part method of electrospinning is described, including parameters which influence this process. Literary research also includes a chapter about rheology, which deals with the rheological properties of polymers, specifically PVA. The experimental part describes the preparation and rheological study of of aqueous solutions of polyvinyl alcohol, which were then spun. The morphology of prepared nanofibers was studied by using scanning electron microscopy (SEM). The effect of molecular weight, the solvent, concentration of solution, rheological properties, electrical conductivity and surface tension on the spinability, diameter and morphology of nanofibers is discussed.
|
|
|
Studying the effect of the application of inorganic nanofibers in high strength concretes
Sedláček, Daniel ; Hela, Rudolf (referee) ; Bodnárová, Lenka (advisor)
This thesis summarizes the current knowledge of reinforcement of concrete with nanofibers and conducted research on the issue of the use of inorganic nanofibers in ultrahighperformance concrete. Up to now, most researches focuses on the reinforcement using carbon nanotubes and nanofibers and inorganic nanofibers remained in the background of interest. Due to their different chemical properties, is not only a question of their influence on the microstructure and mechanical properties of concrete, but also the preparation of nanofiber suspension which is not explored such as in the case of carbon nanotubes and nanofibres.
|
|
|
Castables with Inorganic Nanofibers
Zogata, Stanislav ; Keršnerová,, Lucie (referee) ; Sokolář, Radomír (advisor)
This work deals with the use of inorganic nanofibers in refractory castables. The thesis describes some of the results of previously conducted research on nanofibers. Also description of nanofibres, production and distribution. The experimental part is focused on studying the interaction of Al2O3 and SiO2 nanofibres with aluminate cement. The main subject of investigation is a dispersion of nanofibers using a surfactant and ultrasonication.
|
|
|
Polymeric nanofibrous scaffolds reinforced with diamond and ceramic nanoparticles for bone tissue engineering
Bačáková, Lucie ; Pařízek, Martin ; Staňková, Ľubica ; Novotná, Katarína ; Douglas, T.E.L. ; Brady, M. A. ; Kromka, Alexander ; Potocký, Štěpán ; Stránská, D.
Three types of nanofibrous scaffolds were prepared by electrospining: (1) poly(lactide-co-glycoside) (PLGA) scaffolds reinforced with 23 wt.% of diamond nanoparticles (DNPs), (2) poly(L-lactide) (PLLA) scaffolds with DNPs in concentration ranging from from 0.4 wt.% to 12.3 wt.%, and (3) PLLA scaffolds with 5 wt.% or 15 wt.% of hydroxyapatite (HAp) nanoparticles. The diameter of the nanofibers ranged between 160 and 729 nm. The nanofibers with nanoparticles were thicker and the void spaces among them were smaller. Mechanical properties of the nanoparticle-loaded scaffolds were better, as demonstrated by a rupture test in scaffolds with DNPs and by a creep behavior test in scaffolds with HAp. On PLGA scaffolds with DNPs, the human osteoblast-like MG-63 cells adhered in similar numbers and grew with similar kinetics as on pure PLGA scaffolds. Human bone marrow mesenchymal stem cells grew faster and reached higher population densities on PLGA-DNP scaffolds. However, on PLLA-based scaffolds, the activity of mitochondrial enzymes and concentration of osteocalcin in MG-63 cells decreased with increasing DNP concentration. On the other hand, the metabolic activity of MG-63 cells and content of osteocalcin in these cells were positively correlated with the HAp concentration in PLLA scaffolds. Thus, PLGA nanofibers with 23 wt% of DNPs and PLLA nanofibers with 5 and particularly 15 wt.% of HAp seem to be promising for bone tissue engineering.
|
|
| |
|
|
Surface functionalization of the materials by plasma technologies
TROUP, František
This thesis deals with the plasma functionalization of nanofiber materials for biomedical applications. Nanofibers of SiO2 and PCL was functionalized using a microwave plasma in order to establish amine functional groups. The work includes theoretical assumptions selection of these materials, their properties and current use with emphasis on biomedical applications. The paper also presents the theoretical foundations of plasma technology, their principles and practical applications. The experimental part of the work includes the optimization of process parameters for each nanofiber materials, review hydrophilisation surface and material degradation through SEM and private functionalization. In conclusion outlines proposals for further action beyond the experiments of this work.
|
|
|
Investigation of nanomaterials for their nuclear power and research utilization
Jelínek, Martin ; ČEZ,, Jiří Skalička, (referee) ; Katovský, Karel (advisor)
This bachelor thesis provides a comprehensive overview of the properties of various nanomaterials and summarizes the latest findings and knowledge of advanced applications in all sectors of nuclear power engineering from construction materials through nuclear fuel, fuel cladding, neutron moderator and coolant to the advanced methods for detection of ionizing radiation ad its direct utilization for electricity production. A significant space is devoted to the applications in safety systems of nuclear power plants. The experimental part of the thesis deals with the possibility of using carbon nanofibers as an additive to the coolant in VVER reactor type in order to improve the thermal properties of the coolant. So far a very little examined issues of neutron balance changes due to interaction with nanoparticles was experimentally verified on the paraffin wax mixture of two different concentrations. The comparison with the reference sample of pure paraffin was also made.
|
guest ::
