|
|
Design of a space heating system with a heat pump air-water and solid fuel source for heating the family house
Španihelová, Kateřina ; Elcner, Jakub (referee) ; Katolický, Jaroslav (advisor)
The aim of this thesis is to design the heating system for the house, including the design and calculating the required quantity of heat for hot water. The specified heat sources are the heat pump air to water and solid fuel boiler. The task was to design the heating system to the fastest possible return on investment. The initial investment in a heat pump is high so it is necessary to design the heating system as efficiently as possible. The thesis contains a complete project of calculating heat loss of the building, the design of heating surfaces and their heat-technical calculation. There is included the design of the pipe system, the calculation of pressure loss and its regulation. The thesis also includes design of safety equipment, temperature regulation and drawings. On the basis of calculated data was processed economic assessment, which determines the return on investment to the heat pump. Compared to the gas condensing boiler the return on investment will ideally be after five years.
|
|
|
Utilization of waste heat for heating and hot water
Dvouletý, Tomáš ; Jaroš, Michal (referee) ; Katolický, Jaroslav (advisor)
The thesis aims to design a device for utilization of waste heat for heating and hot water in NETME Centre in area of FSI VUT in Brno. First of all there is summary of available sources of waste heat and evaluation of serviceability. Next there is design of a device for utilization of waste heat. Design incluades calculation of heat exchangers and selection of particular heat exchangers. It also incluades design of duct system which anables transportation of heated water from heat exchangers to machine room. In machine room is situated storage tank for accumulation of gained waste heat. This storage tank is conected to heating system and to consumption of hot water which anables utilization of waste heat. Finally there is economic evaluation based on amount of gained waste heat, consumption of heat and costs.
|
|
|
Operation check of dredge pump
Pleban, Jakub ; Fiedler, Jan (referee) ; Skála, Zdeněk (advisor)
The aim of this thesis is to consider the operation of dredge pump and design new technology of slag removal including return on investment calculation. The operation optimization itself was preceded by analysis of present technology, data collection, calculation of pressure losses and pinpointing the causes of their origin. Subsequently, the measures to elimination of losses were deduced and these measures were implemented into optimization of dredge pump operation itself. The return on investment into the new technology of slag removal is calculated in the last chapter, considering its feasibility in the heating plant.
|
|
|
Sludge Pumping on WWTP
Fadrný, Tomáš ; Medek, Jaroslav (referee) ; Boráň, Jaroslav (advisor)
This diploma thesis deals with the best solution design for a sludge fitting, especially focusing on the right choice of pumps for the waste water treatment plant in Prostějov. The pumps were selected for a circulation pipeline, which heats up the sludge. Several measurements were carried out in order to determine the statistical evaluation of the properties of the pumped medium. The figures gained were used to calculate pressure losses.The diploma thesis is divided into two parts. The first part provides a theoretical analysis of the problem and the second part presents the results and subsequently the reasoning for the new selection of pumps in order to change the WWTP technology from the mesophilic to the thermophilic sludge digestion. The test records describing the testing of the individual samples of the pumped sludge are attached.
|
|
|
Calculation algorithms for thermal-hydraulic design and rating of unconventional heat transfer equipment
Mikeška, Petr ; Kohoutek, Josef (referee) ; Jegla, Zdeněk (advisor)
The aim of diploma thesis is creating calculation algorithms off single types unconventional heat transfer equipment and their aplication in thermal - hydraulic calculations in the industrial aplication . The main attention is paid to shell and tube heat exchangers with ROD and disc baffle system and radiation heat exchanger. All of these exchangers are used mainly in process of waste thermic destruction. The theoretical part of the work describes construction details of each heat exchanger and calculation algorithms of these equipments. The practical part of the work applies theoretic calculation alghortims in the industrial aplication which is design and rating. In the final part advantages and disadvantages of results have been assessed for construction and process aspects.
|
|
|
Steam boiler for fytomass
Rotrekl, Jan ; Ing.Pavel Křemínský (referee) ; Skála, Zdeněk (advisor)
This diploma thesis deals with a design of a boiler for stillage combustion. Stoichiometric calculations and enthalpies of combustion gases have been calculated from the specified parameters. In addition, heat calculation, design of the combustion chamber dimensions and dimensioning of heat surfaces were accomplished. The boiler has an evaporator with natural circulation and a fire grate.
|
|
| |
|
|
Heat exchanger design
Loukota, Martin ; Lisý, Martin (referee) ; Baláš, Marek (advisor)
This bachelor thesis deals with design of tube heat exchanger for preheat the return water to the boiler. Thesis contains description, distribution and requirements of the tube heat exchangers, stoichiometric calculation, geometrical dimensions design, pressure loss and thermal performance calculation. Thesis also includes drawings of the designed exchanger.
|
|
|
Heat exchanger design
Zdvyhal, Marian ; Hrnčířová, Michaela (referee) ; Baláš, Marek (advisor)
This bachelor thesis solves design of a heat exchanger for hot water boiler with gasification chamber for preheating the combustion air with the heat of the combustion products. Calculation values were experimentally measured. Thesis contains brief description of the shell and tube heat exchanger, stoichiometric combustion calculation, geometrical dimensions design of the heat exchanger, pressure loss and thermal performance calculation. It also includes drawings of the designed exchanger.
|
|
|
Intermediate heat exchanger natrium - natrium
Kupčík, Petr ; Martinec, Jiří (referee) ; Šen, Hugo (advisor)
This paper deals with intermediate heat exchangers in nuclear power plants. First section of this paper is devoted to analysis and divide of construction designs of intermediate heat exchangers in commercial and experimental power plants. There is a description of thermal, hydraulic and strength calculations during projection of IHX in the second chapter. There has been made a blueprint of loop type IHX in the final chapter of this paper.
|
guest ::
