National Repository of Grey Literature 110 records found  beginprevious62 - 71nextend  jump to record: Search took 0.01 seconds. 
Determination of closing valve control moments
Benda, David ; Vosynek, Petr (referee) ; Hnízdil, Milan (advisor)
This bachelor thesis deals with the calculation of the torque on the output shaft of the four-concentric butterfly valves and experimental measurement of this torque on real manufactured valves. At the beginning is carried out a brief research, the purpose describe the basic components of the butterfly valves, its production variants of the offset disc, eventually types of fittings to piping. The main part describes the partial torque occurring on the individual components. Following data from the performer measurement and at the end are compared obtained results.
Modifying the Babetta engine
Poulíček, Matěj ; Píštěk, Václav (referee) ; Kaplan, Zdeněk (advisor)
This bachelor thesis is about one of the possible modifications of two-stroke single-cylinder Babetta 210 engine for increasing of power. Further about another manufactured Babetta engines with focus on their pros and cons. Attention is paid also to possible design changes for elimination of drawbacks.
Measuring the power of IC-engines
Adamec, Vojtěch ; Ramík, Pavel (referee) ; Štětina, Josef (advisor)
This bachelor thesis deals with topic measuring the power and the torque of internal combustion engines on chassis dynamometer. The aim of the thesis was to show advantages and disadvantages of different types of dynamometers, to make review of standards for measuring power on chassis dynamometer, effect of atmospheric conditions, resistances and slippage. Thesis also describes evolution, different designs of chassis dynamometers, effect of roller diameter to rolling resistance and deformation of tire, suitable types of dynamometers for chassis dynamometer, equipment of testing room, modes of operating and differences between static and dynamic power testing. In the end I have made prediction of incoming development devices of this type with regard to evolution of intelligent chassis control systems and electric vehicles.
Advanced methods of surface topography evaluation
Toman, Ladislav ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
This paper deals with the description of the surface texture measurement methods, describes the devices by which the surface texture can be recorded and describes the parameters that allow the surface texture to be quantified. The practical part deals with the evaluation and comparison of the parameters of metric threads M10 made by cutting and forming by analysis of their cross-sections, then the attention is focused on the analysis of pressure forces and torques which occur during the manufacture and in the last part of the thesis there is an economic evaluation of the cost of manufacturing one piece of cut thread.
Chassis Dynamometer System for Motorcycle
Hanuš, Michal ; Prokop, Aleš (referee) ; Janoušek, Michal (advisor)
This bachelor thesis focuses on realization of the dynamometer project for motorcycles. The project is connected with measuring of power, measuring of torque and optimization of two-stroke engine. The introduction aims to choose best option based on the research and requirements.
Controllability assessment of the Roudnice nad Labem sector weir box at extreme floods
Růžek, Patrik ; Haluza,, Miloslav (referee) ; Šulc, Jan (advisor)
This thesis deals with the determination of the load torque during flood conditions on the hydrostatic sectoral weir in Roudnice nad Labem. Problems are solved due to a glitch in the lowering sector. The aim of this study is to determine the resulting torque, of three selected states, which occurred at the water works. The issue was solved as a plane 2D problem using AutoCAD, in which were read the relevant data. It was also used ANSYS software, which modeled the flow of water over the weir to detect pressures acting on overflow face. All calculations are then counted in Microsoft Excel. Force balance is performed on the one-meter design.
Soustava těles s pasivním účinkem s brzdou
Genco, Ondřej ; Hájek, Petr (referee) ; Fuis, Vladimír (advisor)
This thesis deals with the solution of the body system using NNTP static theory model. The introductory part defines the basic magnitudes and concepts, describes the constraints and the types of passive effects. In the practical part, the influence of passive effects on different moving states in the particular system of the towed trolley is determined. Furthermore, two variants of mechanical friction brakes are designed and compared. The numerical values of unknown parameters are determined by solving the system of linear equations in Matlab.
Design of synchronous spoke motor
Kopecký, Jan ; Bulín, Tomáš (referee) ; Knebl, Ladislav (advisor)
This thesis is focused mainly on the theoretical research of permanent magnet synchronous motors. In addition, various methods of designing the motor‘s magnetic circuit are discussed and their advantages and disadvantages are compared. The reluctance network method is analyzed more thorough, because this method is used for motor designing process. In the last part the results obtained by reluctance network are compared with the results evaluated by finite element method.
Influence of the exhaust pipe on the speed characteristic of the four-stroke motorcycle engine
Nádvorník, David ; Hejtmánek, Petr (referee) ; Smolka, Josef (advisor)
The content of this bachelor thesis is a summary of the knowledge about the exhaust pipe of the motorcycle and its influence on the power and torque of the engine. Further, the bachelor thesis focuses on additional exhaust pipe systems which help to optimize the torque and engine performance. At the end of the thesis are included the results from the experimental measurement dealing with the influence of the exhaust silencer on the curves of the engine speed curve.
Orientation Control of Satellite - Laboratory Experiment
Neužil, Ondřej ; Baran, Ondřej (referee) ; Urbanec, Tomáš (advisor)
This diploma thesis is about the basics of satellite systems, about their sorting, usage and technologies. An important part is the description of the principles controlling and stabilization of the small experimental CubeSat type satellites. The main point is the proposition and construction of the laboratory model of the CubeSat type satellite that should simulate the chosen methods of controlling and stabilization in laboratory conditions. The thesis describes the construction of the electronic parts of the model, the controlling software of the satellite’s processor and user software for easy controlling by PC.

National Repository of Grey Literature : 110 records found   beginprevious62 - 71nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.