|
|
Restaurant with Microbrewery in Golčův Jeníkov
Wernerová, Lucie ; Soudek, Pavel (referee) ; Kalousek, Lubor (advisor)
The project involves the design and solution of restaurant with microbrewery and accommodations. This is a new building on the land plot no. 2739, which is located in Golčův Jeníkov and situated in the middle of plat. Entrance to object and disposition inside the building is has barrier-free solution. Restaurant with microbrewery is designed for a capacity of 120 people in restaurant and 30 places to sit in lounge bar. Total capacity of boarding house is 21 beds. One double room is designed has barrier-free solution. Structural system of restaurant with microbrewery is combined, which is formed in one part of precast concrete frame S 1.2 and in other part of wall structural system. They are designed reinforced concrete columns about dimensions 0,4x0,4 m with axial distance 6x8 m. Masonry part of the building and infill wall in above-ground floors is lined with ceramic blocks of the type therm. Infill wall in the basement is formed of permanent formwork. The building is insulated a contact thermal insulation with an insulation of thickness 130 mm. Internal loadbearing and non-load-bearing wall in basement and in first floor are lined with ceramic blocks type therm and in second floor they are designed plasterboard partitions. The building is covered with a warm flat roof. Loadbearing structure of roof and ceilings structure are formed prestressed concrete floor slabs SPIROLL. Floor assembly is burdened with river stones of thickness 120 mm.
|
|
|
Structural design of the testing centre
Růžička, Martin ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The master´s thesis concerns with the design of the construction of the testing centre. The hall is divided in two parts, in one of those parts the office rooms are located. The precast concrete frame of the hall is composed by foundation pads, columns, secondary beams and crane beams, precast slabs, and prestressed girders. The thesis contains report, structural design, drawings of floor plans and sections, drawings of formwork and reinforcement, visualization and steps of construction.
|
|
|
Multifunctional house in Brno, Chernivtsi - construction technology project
Kondáš, Ondřej ; Nečasová, Barbora (referee) ; Biely, Boris (advisor)
The aim of this master's thesis is the construction-technological project of the entire building focusing on major construction building - Multifunctional house, which is based on large-diameter piles. The main part of thesis are budget of object and time schedules of construction. Part of the thesis is organization of construction and design of the site eguipment, technological regulation of selected work, quality control and solving transport relations including oversize cargo. It also deals with the design of mechanical assemblies, health and safety, safety of environment and design of instructions for use of building.
|
|
|
Apartment House
Němec, Nikola ; Karlík, Štěpán (referee) ; Lavický, Miloš (advisor)
This bachelor’s thesis solves a project documentation of Apartment House and contains appurtenances according to valid regulations. The house is designed as a detached house, without basement. It has a non-standard size and is covered with a flat vegetation roof. The house has five floors with balconies. The house has 12 dwelling units. On the first floor is accessory apartments: bicycle and pram room, utility room, utility room and cellar rooms. In the house is designed a elevator. The house is made of precast concrete frame and infill wall with a contact thermal insulation system.
|
|
|
Multi-storey precast structure
Polák, Marek ; Šimůnek, Petr (referee) ; Perla, Jan (advisor)
The final thesis is focused on reworking hospital pavilion from cast-in-place structure to precast concrete frame. Calculation of internal forces is made by software system SCIA Engineer. Main load-bearing elements are inner beam, outside beam and all columns in axis 2-C. This thesis contains assembly report, structural design, calculations and drawings of the designed parts, joint details, assembly material drawing and hand calculation.
|
|
| |
|
| |
|
|
Construction and technological project of the polyfunctional buildings in Olomouc
Macháčová, Kateřina ; Kopecký, Lukáš (referee) ; Novotný, Michal (advisor)
The aim of the diploma thesis is to make the detailed building-technological project of the polyfunctional buildings in Olomouc. The thesis contains a summary accompanying technical report, technical regulations, control and test plan. Next parts of the work are time schedule and an itemized budget of the polyfunctional building, time and financial plan of the whole building, calculation of the costs of operating the construction site, Occupational safety and health instructions, traffic situation around building, design of mechanical set, drawings of site equipment. Finally there is also situation of construction, pilot implementation scheme and construction details.
|
|
|
Gym – Precast concrete frame construction
Čihák, Tomáš ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
This master thesis deals with a draft of precast concrete frame structure on the case of gymnasium building. The major part of this work are transversal and longitudinal frames, consisted of footings, columns, girders and precast floor slab. Other parts of the building are not solved. Thesis consists both static calculations and drawings.
|
|
|
Construction and technological project of the manufacturing hall in Valašské Meziříčí
Pobořil, Petr ; Dvořák, Jan (referee) ; Novotný, Michal (advisor)
In my diploma thesis I solved construction and technological project of the manufacturing hall in Valašské Meziříčí. In my final thesis I focused on reinforced concrete structure for manufacturing press. For tis construction I processed technological prescription, control and test plan, budget, scheldule and assembly detail. Further I wrote up financial plan and scheldule for whole building, hazards in the workplace plan, proposal machinery, budget and scheldule for main building, site equipment project. In my final thesis, I have also dealt with solving transport roof girder on building site.
|
guest ::
