|
|
GSM Module for FITkit Platform
Holinka, Milan ; Šimek, Václav (referee) ; Bartoš, Pavel (advisor)
Educational platform FITkit has plenty options of communication. Interfaces, that are not implemented on the main board of the kit, accuring regularly in the form of external modules or controllers realized in FPGA. The aim of this work is to extend the capabilities of FITkit platform about the possibility of using a GSM network via accessory module. Describes the design, composition and activation of this module, creation a library for its handling and demonstration its activities on the sample application. Finished device can transmit and receive SMS messages and connecting voice calls.
|
|
|
Secure PC Connection
Winter, Jan ; Škarvada, Jaroslav (referee) ; Kubek, Ján (advisor)
Aim of this master's thesis is the creation of serial communication interface for FITkit. This serial interface is a full duplex industrial bus based on 20mA loop circuit and it should allow connection of two FITkits by RS-485. Aim of this paper is to design simple software allowing communication of two FITkits and to secure this communication on RS-485 link against interference or transfer errors.
|
|
| |
|
|
FITkit as a Remote Controller Transceiver
Růžek, Michal ; Strnadel, Josef (referee) ; Vašíček, Zdeněk (advisor)
The bachelor's thesis is about communication protocols used in infrared remote controls of consumer electronics. It describes widely used protocols such as RC5, NEC and SIRC, their properities and methods of decoding. Transceivers are realized via components inside FITkit's FPGA chip, using simple HW module. Demo application written in C language is also included.
|
|
|
QDevKit Source Code Editor
Kábele, Břetislav ; Slaný, Karel (referee) ; Vašíček, Zdeněk (advisor)
This work deals with the design and implementation of the QDevKit source code editor and file manager. The theoretical part of this thesis describes trends of modern source code editors and features of used technologies. It describes the concept, the implementation and the way of integration the incurred solution.
|
|
|
Robot Control Using FITkit
Novotný, Tomáš ; Orság, Filip (referee) ; Rozman, Jaroslav (advisor)
This paper deals with the teoretical background, design and implementation of the remote controlled robot, which is shipped with various sensors. Work is based on the available devices. FITkit is used for controlling sensors, motors and communication with the PC at the robot side. The different interfaces are used by almost every sensor. These are the I2C bus, PWM or analog signals. The biggest part of the controlling is done by the FITkit using programming C language. The FPGA is used just for the communication over the COM port. Later expansion was in the mind during the design and implementation. The result of this work is remote controlled robot with the sonars, compass, accelerometer and optical encoders.
|
|
|
Expansion Module with MP3 Files Decoder for FITkit Platforma
Brada, Miroslav ; Bartoš, Pavel (referee) ; Šimek, Václav (advisor)
Aim of this project is building of expansion module which expands capabilities of FITkit platform by allowing decoding of MP3 files. This thesis summarize knowledge about current audio encoding formats, available decoders and FITkit platform. Later part of thesis describes design procedure of expansion module for this platform, which was completed, although unsuccessfully. Module is using VS1063 codec. The end of thesis describes possible expansions in case of successful implementation.
|
|
|
FITkit Control System Based on Python
Černek, Martin ; Vašíček, Zdeněk (referee) ; Bidlo, Michal (advisor)
This bachelor's thesis describes the design and implementation of a system, denominated as PyDevKit, for the FITkit educational platform. The goal is to integrate the translation system support, project management, source-code editor and interaction with the third-party tools into a single application. In order to ensure a good multi-platform support, the implementation is performed using the Python environment and some necessary external libraries available for this environment. PyDevKit is equipped by a graphical user interface that provides the user with a tool for a comfortable work with FITkit.
|
|
|
Simple FITkit Based Weather-Station
Podivínský, Jakub ; Mičulka, Lukáš (referee) ; Strnadel, Josef (advisor)
In this bachelor thesis, the design and implementation of FITkit-based home weather-station is presented. In the thesis, various methods of measuring meteorological quantities are detailed and discussed together with advanteges and disadvantages of common electronic sensor parameters. Then, weather forecast methods are classified and principle of a simple weather-forecast algorithm based on the atmospheric pressure measurement and analysis is described and discussed according to its realization by the means of the FITkit platform. At the end of the thesis, design and realization of an additional hardware needed to operate the station on basis of FITkit is described.
|
|
|
DMA Support for HCS08 Microcontrollers Family
Novosád, Adrián ; Strnadel, Josef (referee) ; Šimek, Václav (advisor)
Embedded systems are dedicated to perform specific tasks, so design engineers can optimize them to reduce the size and cost of the product and increase the reliability and performance. However, result of these optimizations is that some architectures may lack commonly used technologies such as direct memory access (DMA). We may encounter with this situation in family of microcontrollers HCS08. The main theme of this work is to describe a design of DMA controller that can be added into the family of microcontrollers HCS08.
|
guest ::
