|
|
Environmentally Advanced Library
Burýšková, Jana ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The main aim of the Master‘s project is to design a library and a cafe in Příbram. The project is divided into three parts. The first part deals with architectural and structural design. The second with technical building services and the third with thermal imaging. The building has a basement and two above-ground floors. The building is founded on foundation strips. The building is designed with load-bearing brick walls and pre-stressed slabs Spiroll. The roof is a flat intensive green roof. The building envelope is insulated with mineral wool. In the building there is air a conditioning and a cooling system. As a heat source, a pressure-independent heat exchanger unit connected to the local hot water pipe will be used. A part of the electricity consumption is covered by photovoltaics. In the third part there are images from a thermal camera for some libraries. Imagines were evaluated if there are thermal bridges in the measured libraries. The project was carried out in the AutoCAD programme.
|
|
|
Kindergarten with a Daycare Center
Okál, Tomáš ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The subject of this thesis is the preparation of the designated functional parts of the project documentation for the realization of the construction. The object serves two different purposes. The first purpose is a two-story kindergarten facility with two classes for 16 children each. This part is made as a wooden structure using a two-by-four-column structure. The roof is designed as a counter made of wooden I-beams. The roofing consists of coating hydro insulation. In addition to kindergarten, the given part of the building will also provide facilities for certified teachers and facilities for kitchen, cleaning and maintenance workers. On the second floor, there is an entrance to the terrace formed by an intensive green roof. This roof also serves as a construction of a flat roof for part of the daycare facility. The daycare centre can accommodate ten people in full operation. This facility also includes a workspace for a certified employee who takes care of the building's clients, as well as facilities for a canteen, cleaning, and maintenance. The facility is designed as a brick building with a separate entrance. Each of the two purposes provides its clients with the possibility of entering the area through a separate entrance with reserved parking spaces. The entrance to both buildings is equipped with barrier-free access. The object will primarily serve the citizens of Horné Dubové but also the citizens of the surrounding municipalities.
|
|
|
Multipurpose Educational Centre
Drahokoupilová, Barbora ; Vystrčil, Jan (referee) ; Košíčková, Ivana (advisor)
The objective of my diploma thesis is to design multipurpose educational centre. The project consists of three parts. The aim of the first one is to create the architectural and structural design. The building is mainly centred around four common rooms accompanied by a simple kitchen and basic amenities. It is a two-storey building with a green roof. Its floor area is 327 m2. The vertical load-bearing structures are masonry, specifically made of aerated concrete blocks. The horizontal load-bearing structures are designed as cast-in-place reinforced concrete slabs. Envelope walls are insulated with mineral wool because of its elliptical floor plan. The foundation is cast-in-situ concrete slab. The second part focuses on a building services design. Domestic hot water and heating is provided by a gas boiler and electricity is partly supplied by a photovoltaic system. The building has mechanical ventilation with heat recovery. There is an underground tank for collecting rainwater that is used for watering the garden. The third part relates to facility management. It focuses on facility operations and core and non-core activities.
|
|
|
Home for seniors
Koláříková, Eliška ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of the master´s thesis is to design a Residential care home as smart building. It is situated in the centre of Křenovice near Brno. The master´s thesis is divided into three parts, first part presents design documentation, second part is focused on building services and the final part presents noise control in building. Residential care house is designed as two-storey building without basement with flat roof. On the first floor there is utility area for senior house and healthcare facility and on the second floor there are flats for seniors. Residential care house is built on footing. Load-bearing and non-load-bearing walls are designed from hollow bricks type THERM. External walls are insulated with mineral wool. The roofing of residential care house is made up of extensive green roof. The building services of the building includes two ground-water heat pumps with boreholes for heating and cooling, photovoltaic panels, HVAC, hot water cylinder and rainwater storage tank. The final part is focused on noise control in building. It is about acoustic in construction. Noise study is also included.
|
|
|
Office building with retail space Žilina
Hubocká, Zuzana ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
Master project is dedicated to design nearly zero-energy office building with retail spaces in Žilina. The first part deals with architectural – building design. Building is designed for the plot nr. 7011 with flat surface and there is no other building. The building has three above-ground floors and one underground floor. Retail spaces are on the ground floor. The building is constructed on foundation strips and pads. The building is made of combined load-bearing structural system of reinforced concrete columns and external walls. External load-bearing structures of above ground floors are designed from reinforced concrete and Ytong system supplemented by ETICS made of mineral wool. Underground walls are made from watertight concrete. Floor slab structures are made from reinforced concrete. The building is covered with green warm flat roof. The second part deals with building interior installation. The primary source of heat, coldness and hot water is the heat pump. Ventilation in the building is provided by heating, ventilating and air conditioning (HVAC) units. The third part of the thesis includes the design and assessment of the photovoltaic power plant in terms of economics and ecology. The project was carried out in the AutoCad system. All structures comply with the valid standards and regulations.
|
|
|
Senior centre in Ždár nad Sázavou
Brukner, Josef ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The aim of this master thesis is to design home for the residential care of elderly and disabled people in Žďár nad Sázavou. It is designed as a three-storey building with a basement. There are technical facilities, in the basement. Canteen, doctor´s office, manager‘s office and reception are located on the first floor. Second and third floor contains common premises and residential units.building has a prefabricated reinforced concrete structural framework with mineral wool thermal insulation. It is covered with an extensive green roof. Piles are designed as the foundation. Partition wall is designed from plasterboard. The project and 3D rendering were carried out in Revit and Lumion software. All structures comply with the valid standards and regulations. The building site contains also an outdoor car park and a park.
|
|
|
The apartment building Budatín
Hubocká, Zuzana ; Woytela, Jindřich (referee) ; Brzoň, Roman (advisor)
The bachelor thesis deals with design realization of apartment house in suburban part of Žilina-Budatín. The building has been designed for plot n. 712/108, which has got flat surface and it is without any other building. The apartment house has got three above ground storeys and underground, which is used for garage. External load-bearing structures of above ground storeys are designed from blocks Ytong complemented with contact thermal insulation system from mineral wool. External load-bearing walls in basement are made from hollow concrete blocks with concrete encasement and reinforced with steel. Floor structure in the building has been designed from prefabricated floor Rectobeton. The building is roofed with hipped roof under 15° angel. The building has been designed with 8 housing units; one of them has been designed as barrier-free housing unit, 3 two-room, 2 three-room and 2 four-room housing units with different layout of the floor. Moreover there are common room, cellar area with technical room, room for prams and basement garage with 13 parking places in the building.
|
|
|
Retirement center in Velké Poříčí
Vondrová, Michaela ; Herman, Adolf (referee) ; Bantová, Sylva (advisor)
It is about new-built Retirement center standing alone in the cadaster unit of the town Velké Poříčí. The building has four- floors without basement. It is located in flat terrain near the river in quiet location. The house is built as letter L form. The Retirement center is adapt for disabled people. In the first floor is dining room, doctor´s office, part for employees and technical facilities for house. In the second and third floors are apartments. There are 12 single rooms for one person, 6 single rooms for pair with sleeping in one room and 4 apartments for couple with separated bedroom. In the fourth floor is access to roof terrace. The structural systém of the building is composed of precast concrete frame by Prefa, infill wall from ceramic masonry. Vertical structures are built by prestressed concrete floor slab Spiroll. The building has ventilated facade with mineral wool with facade cladding. The roof is warm flat roof with half intensive green roof.
|
|
|
Modernization of apartment house Vlhká 22, Brno
Neduchal, Zbyněk ; Šimkovičová, Ludmila (referee) ; Petříček, Tomáš (advisor)
The diploma thesis processes project documentation in the stage of construction for modernization of an apartment house near the center on the street Vlhká 22 in Brno. The building is divided into four residential floors and nonresidential basement and attic. On the first floor there are two residential units and the other four residential units. The foundation structures are made of solid bricks. The vertical load-bearing and non-load-bearing structures are also made of solid bricks. Exceptionally drywall partitions. In the basement, the ceiling structures are made of brick barrel vaults, above the above-ground floors there are wooden beamed ceilings. The roof structure of the building is made of purlin system with standing stool and covering of ceramic roof tiles. Three additional housing units will be built in the attic. In the basement, the masonry will be undercut by a chain saw, partly by pressure grouting and partly by a new layer with a waterproofing layer. All wood-beamed ceilings will be replaced with prefabricated ceiling beams with aerated concrete inserts without overhead slab. The garden part of the building will be insulated with mineral wool. The roof structure will be constructed from the street side as a shed roof and in the garden part a flat roof with a gradient layer of expanded polystyrene thermal insulation and a waterproofing layer of thermoplastic poleolefin.
|
|
|
Vizualization of flow of fibers from insulation mineral wool
Kedajová, Kristýna ; Elcner, Jakub (referee) ; Lízal, František (advisor)
One of the most used insulation materials of our time is mineral wool. As with formerly used asbestos, not all the health impacts of mineral wool fibers inhalation are known. The aim of this thesis is to gather findings relating to the transport of aerosols, their deposition in human airways and to obtain and statistically evaluate experimental data from the visualization of fibres in the glass tube resembling human airways. This data can improve understanding of the relation between glass fibres action and possible health hazard.
|
guest ::
