|
|
Influence of particle size of cosmetic pigments on final properties product
Obručová, Kateřina ; Hurčíková, Andrea (referee) ; Zemanová, Jana (advisor)
This diploma thesis is focused on the study of the influence of the of size cosmetics pigments on the properties of the final product. This effect was studied on samples of make-up given by industry partner. Make-up samples were measured by the rheology method and the yield stress of all samples was determined. Scanning electron microscopy was used to determine the size and shape of the pigment particles. Particle size was also measured by dynamic light scattering, but the results were influenced by forming aggregates. To easier determination of the types of pigments in the sample was determined elemental composition of the pigments (Ti, Fe, O, Al) by EDS detector. Due to the unknown composition of make-up, the information was supplemented by X-ray powder diffraction (XRD) analysis, and it was possible to determine the compounds TiO2 (anatase and rutile), FeOOH and Fe2O3. The results obtained by these methods showed what pigments can be found in make-up samples, what their sizes and shapes are. It has been shown that the smaller the pigments are, the higher the viscosity and yield stress of the final product. The higher these quantities, the harder it is to handle the product.
|
|
|
Viscoelastic properties of hydrogels depending on relative humidity
Kouřilová, Ludmila ; Heger, Richard (referee) ; Smilek, Jiří (advisor)
This bachelor thesis is mainly aimed on the determination of the dependence of the viscoelastic properties of physically crosslinked hydrogels on the relative humidity controlled by humidity cell (as an accessory to a rotary rheometer), or the desiccator with the drying medium. The main objective was to optimise the methodology of the humidity cell for the rheological determination of the viscoelastic properties of hydrogel materials as a function of relative humidity and to verify experimental setup on the agarose hydrogel. The results showed that the agarose hydrogel gradually loses its dispersion medium after exposure to chosen relative humidity, resulting in a loss of contact between the upper rheometer sensor and the sample when measured with the standard measurement gap control setting, which is constant during the measurement. The setting of the control of normal force proved to be an appropriate solution, which has led to a gradual reduction in the height of the upper rheometer sensor in an attempt to keep the normal force at the desired level during the drying of the hydrogel. A humidity cell proves to be an appropriate method for determining the dependence of the viscoelastic properties of hydrogels on relative humidity. Unlike the use of a desiccator with drying medium, the drying of the hydrogel sample does not result in such rapid drying that it breaks the texture on its surface. Another advantage of a humidity cell is the ability to maintain the desired relative humidity value even if the gel begins to release dispersion medium into its surroundings, which was not possible with a desiccator with drying medium.
|
|
|
Hydrogels based on cationic polyelectrolytes
Jarábková, Sabína ; Lehocký,, Marián (referee) ; Pekař, Miloslav (advisor)
This diploma thesis deals with the study of physical hydrogels based on positively-charged polyelectrolyte. The study is to investigate the interaction of selected positively-charged polyelectrolytes with oppositely charged surfactants in water and in physiologicla saline solution (0.15 M NaCl). The influence of the process for preparing hydrogels. Hydrogels were prepared by dry or wet. Were tested solubilization abilities hydrogels prepared using the hydrophobic dye oil red O were also measured rheological properties of the hydrogels prepared using frequency oscillatory tests and flow tests, depending on the concentration of the polymer or surfactant. For the rheological experiments suggest that chitosan is capable of forming rigid hydrogels with better mechanical properties than the dextran in the presence of both surfactants. Selected samples were also carried out experiments using fluorescent sold prodan, nile red and -naphthol as fluorescent probes. And in selected experiments was determined by solids content in percentage depending on the concentration used polyelectrolytes or surfactants.
|
|
|
Influence of conditions on hydrogel preparation
Heger, Richard ; Kalina, Michal (referee) ; Mravec, Filip (advisor)
This work is focused on testing the influence of conditions, more precisely pH, during the creation of hydrogels that were prepared through the hydration of powdery mixtures, by another name solid-mixture way. The hydrogel system was made from a polyelectrolyte, more accurately sodium hyaluronate and a cationic surfactant, CTAB. The influence of pH was studied through observation and rheology. For measuring purposes, the hyaluronan with the molecular weight of 600-800 kDa was used. The system was examined via a series of buffers with the pH of 3,5-11. The gels were dyed by Sudan III for better observability and description. It was found that the best way of adding an active substance was by adding a dye directly into a powdery mixture. The observed properties of the gels didn’t change even after the gels were modified to the ionic strength of a physiological saline solution (0,15 M).
|
|
|
Time-temperature superposition principle used for study of rheological properties of polymer materials
Kadlec, Martin ; Jarábková, Sabína (referee) ; Smilek, Jiří (advisor)
This bachelor thesis provides a study of the “time-temperature superposition” principle and its applicability to hydrogels. According to current research, honey was chosen due to its simple viscoelastic properties (Newtonian liquid) as a suitable material for optimalization procedure. The knowledge obtained during optimization was further applied to real hydrogel materials, namely the agarose gel was selected as an example of thermoreversible hydrogel, as well as the hyaluronan and dextran gels as examples of hydrogels formed by the interaction of the polyelectrolyte with the opposite charged surfactant. By using the “time-temperature superposition” principle, a considerable increase in the range of the observed oscillation frequencies was achieved for all chosen samples, which led to gain of information about storage and loss or complex modulus, which could not be achieved by classical oscillatory test. Although master curves were generated for all the samples examined, curves for storage and loss modulus could be created separately only for hydrogels formed by the interaction of the polyelectrolyte with the opposite charged surfactant. For this reason, this group of hydrogels appears to be more suitable materials for the application of the “time-temperature superposition” principle.
|
|
| |
|
|
Preparation and characterization of hydrogels based on cationic biopolymer
Tesařová, Barbora ; Mravec, Filip (referee) ; Smilek, Jiří (advisor)
Presented thesis deals with the preparation and characterization of hydrogels based on positively-charged biopolymer and negatively-charged tenside. As an appropriate representative of positively-charged polymer was chosen chitosan, because of his biocompatibility and biodegrability, and N,N,N-trimethylchitosan, which was synthetised from chitosan in this diploma thesis. The final product of synthesis was characterised by SEC-MALS, elemental analysis, infrared spectroscopy and nuclear magnetic rezonation. Interactions between these polymers and representatives of negatively-charged tensides, which are sodium dodecylsuphate and sodium tetradecylsulphate, were investigated. The main method used in this thesis was rheology, through it were investigated prepared hydrogels based on chitosan and tensides and also prepared microgels based on N,N,N-trimethylchitosan and tensides. The interactions between polymers and tensides have been proved.
|
|
|
Study on Interconnection between Structure and Rheological Properties of Hydrogels on Macro and Microscopic Level
Lepíková, Jana ; Klučáková, Martina (referee) ; Kalina, Michal (advisor)
Diploma thesis main goal is to obtain new pieces of knowledge about relationship between hydrogel structures and its flow and transport properties. Thesis is mainly focusing on combining pertinent biopolymers into model hydrogels based on agarose. Then perform correlation of results obtained by diffusion methods, and by rheologic measurements on macroscopic and microscopic level. Properties of hydrogels were measured by selected rheologic measurements, dynamic light scattering method, and correlative fluorescence spectroscopy. From these methods various parameters (MSD modules, values of complex viscosity) were obtained. Afterwards transport properties of prepared hydrogels were studied by observing Rhodamine 6G diffusion. Here two different approaches were used. From macroscopic perspective, simple principles of mass diffusion from dye solution to cuvettes filled with hydrogels containing individual biopolymers were used. From microscopic perspective, dye was added during the sample preparation and then the mass diffusion was investigated using FCS. Based on evaluated results it was discovered that added biopolymers don’t influence properties of carrier medium, in this case agarose hydrogels. During the study of prepared hydrogels’ reactivity and barrier properties some differences were observed. Charge of biopolymer and its charge density were discovered as main factors influencing transport of charged solutes into prepared hydrogels.
|
|
|
Preparation and properties of agarose hydrogel with micellar domains
Sapárová, Alica ; Krouská, Jitka (referee) ; Pekař, Miloslav (advisor)
This diploma thesis was focused on the system of agarose hydrogels with micellar domains. Polysaccharide agarose was used for the preparation of hydrogel matrices. Septonex was chosen as a surfactant. The release of solubilizate from the agarose hydrogel matrix was studied with a hydrophobic dye Sudan III in order to obtain a model system of hydrophobic solubilized drugs. Sudan III was solubilized via surfactant´s micels. Subsequently, this micellar aqueous solution with the dissolved dye was used to prepare the agarose hydrogel. The system was prepared in the environment of deionized water and physiologic solution. The gradual release of the dye into deionized water and physiologic solution was studied for 22 days using the UV-VIS spectrophotometry method. It was found that after 14 days the concentration of the releasing dyes into the deionized water was decreased. The cause is that after 14 and 22 days there was a slight degradation of gels, which was detected using the rheology method. Using the rheology method it was also found that Septonex does not affect the gel formation process.
|
|
|
Rheological properties of asphalt binders
Pěnčík, Michal ; Mondschein,, Petr (referee) ; Hýzl, Petr (advisor)
The Diploma thesis is focused on rheological properties of bituminous binders and mixtures. Above all, it describes the changes of these properties of samples of bituminous binders and mixtures. Those were brought by the process of laboratory aging, since it simulates the changes occurring in the in the real-life conditions. The theoretical part depicts the field of rheology and methods utilized for simulating the ageing of binders and mixtures. The practical part describes the process of preparation of samples and its testing. Firstly, the ageing of bituminous mixture by the means of BSA method (Braunschweiger Alterung) took place, which was followed by preparing the solids for testing the modulus of stiffness and main testing. The rest of the mixture was used for extracting the binder. Tests with the binder were focused on the usage of dynamic shear rheometer (complex shear modulus, dynamic viscosity). The last part of the work is dedicated to the comparison of the outcomes of testing.
|
guest ::
