|
|
Novel materials for organic and hybrid electronics and photonics
Kratochvíl, Matouš ; Yumusak,, Cigdem (referee) ; Táborský, Petr (referee) ; Weiter, Martin (advisor)
Obor organické elektroniky nabízí jedinečnou možnost masové výroby levné a ekologicky přívětivé elektroniky. Otevírá dveře novým funkcím a tvarům zařízení, které standardní elektronika na bázi kovu a křemíku neumožňuje Možnosti dané povahou organických látek a pokrok ve výzkumu syntézy nás zásobují novými materiály pro fotonické aplikace. Hlavní motivací této práce je hledání nových materiálů a zkoumání vztahu mezi jejich molekulární (a krystalickou) strukturou a vlastnostmi. Tato práce je zaměřena na studium optických a/nebo elektrických vlastností nových materiálů pro fotonické aplikace. Materiály prezentované v práci jsou organické i hybridní organicko-anorganické, u nichž je snaha získat to nejlepší z obou světů. Výzkum prezentovaný v této práci se skládá ze tří samostatných částí, které jsou propojeny cílem studovat vztah mezi strukturou materiálu a jeho vlastnostmi a metodami používanými ke studiu těchto vlastností. První část si klade za cíl představit materiály vykazující účinnou fluorescenci v pevné fázi (Solid-State Fluorescence, SSF). V této práci jsou prezentovány dvě série materiálů vykazujících SSF. Barva emise je řízena změnami skupin přitahujících elektrony v push-pull systémech molekul. Výsledky ukazují efektivní (>10%) emise pokrývající většinu viditelného spektra (~450–650 nm). Druhá část prezentovaného výzkumu zkoumá vliv thionace na známou skupinu nízkomolekulárních polovodičů – diketopyrrolopyrrolů (DPP). Prezentované výsledky ukazují ve studovaných molekulách výraznou preferenci n-typové chování následkem thionace, s řádovým zvýšením pohyblivosti elektronů, a také působivě nízko ležící hladiny LUMO (~ 4,5 eV). Třetí část uvedených výsledků je zaměřena na perovskitové materiály pro fotonické aplikace. Hybridní materiál – organo-olovnato-halogenidový perovskit je již téměř půldruhého desetiletí v centru pozornosti výzkumníků v oblasti pokročilé fotoniky. Perovskitové solární články prokazují pozoruhodnou účinnost, avšak jejich využití stále brání problémy se stabilitou. V této práci je prezentována studie stability jako referenční bod pro další výzkum v této oblasti a pro získání vhledu do procesů ovlivňujících stabilitu perovskitových materiálů a solárních článků. Následně je navržen a otestován přístup ke zvýšení stability a výkonu článků, využívající materiály studované ve druhé studii.
|
|
|
Perovskite-based optical sensor
Frkáň, Lukáš ; Jandová, Kristýna (referee) ; Novák, Vítězslav (advisor)
The aim of this Master´s thesis is to frame the concept of perovskite-based materials, provide basic information about perovskite-based materials and scrutinize their potential in terms of optical sensors manufacturing. The thesis also deals with monitoring of the sample in terms of long-term stability. The analysis of measured characteristics and their properties is included in this semester thesis as well, along with the methodology of testing and evaluating of the results.
|
|
|
Highly porous ceramic oxide materials for environmental catalysis
Husťák, Miroslav ; Částková, Klára (referee) ; Cihlář, Jaroslav (advisor)
As far as the replacement of fossil fuels with more environmentally friendly options is concerned, hydrogen is considered as the most promising source of energy. Currently, hydrogen is mainly produced through the method of methane reforming. This method requires the utilisation of catalysts made of precious metals. This master's degree thesis therefore investigates perovskite materials SmCoO3, Sm0,8Ca0,2CoO2,9, SmCo0,8Al0,2O3 and Sm0,8Ca0,2Co0,8Al0,2O2,9, which could be utilised as catalysts in the production of hydrogen by methane reforming. Methane reformation occurs on the surface of a catalyst. Therefore, it is desirable to ensure that the specific surface area of a catalyst material is as large as possible. For that reason, the aforementioned perovskite materials were prepared by two sol-gel methods, which are expected to create perovskites with large specific surface areas. It was investigated in the course of the work how the method of synthesis affects the structure and catalytic properties of individual materials. The SmCo0,8Al0,2O3 material prepared by a sol-gel synthesis with propylene oxide as a gelation agent demonstrated the best results - the measurement of catalytic activity showed that the methane conversion had achieved the value of 99%.
|
|
|
Study of the dielectric properties of perovskite crystals
Mlčkovová, Hana ; Pospíšil, Jan (referee) ; Zmeškal, Oldřich (advisor)
The presented diploma thesis deals with the preparation of perovskite single crystals by inverse thermal crystallization and subsequent study of the basic properties of these hybrid organic-inorganic materials that can be used in various optoelectronic (photodetectors, transistors, lasers, LEDs) or photovoltaic applications. Their behavior in the electric field was studied by impedance spectroscopy. Impedance and capacitance-voltage (C-V) characteristics (frequency dependences) were measured in the dark and in the light. From the impedance dependences for measurements at 0 V voltage in the dark, the equivalent circuit was modeled and its parameters and dielectric constant were determined. From the C-V dependence, Mott-Schottky analysis determined the parameters – "flat-band" potential U_"fb" and charge carrier density N_"C-V" , the parameter – the so-called Warburg coefficient was found, which together with the parameter N_"C-V" was used to calculate the diffusion coefficient D.
|
|
|
Preparation of perovskite solar cells with regular n-i-p architecture and their optimization
Poláková, Simona ; Zmeškal, Oldřich (referee) ; Pospíšil, Jan (advisor)
The diploma thesis deals with the study of perovskite solar cells with a regular n-i-p architecture. The theoretical part of this work is mainly focused on the stability of perovskite solar cells, i.e. thermal stability and the influence of UV radiation on final perovskite solar cell stability. Furthermore, the deposition methods, the architecture of solar cells and the materials used for the preparation of electron and hole transport layers were described in more detail. The experimental part deals with the optimization of the preparation of perovskite solar cells (especially in terms of resulting photovoltaic conversion efficiency), with a description of the structure preparation process of the final photovoltaic cell and the interpretation of the measured results.
|
|
|
Characterization of the perovskit photovoltaic cells
Kaliyev, Alexey ; Jandová, Kristýna (referee) ; Novák, Vítězslav (advisor)
The work is focused on problems of perovskite photovoltaic cells. The theoretical part describes the properties of perovskite structure, its composition and use in solar cells. There is also a brief information on silicon-based solar cells, which is followed by a comparison of the two systems. The measurement methods, which this stated and described here are used to understand problematics photovoltaic, determination of efficiency, stability and durability of the solar cell. In the practical part will focus on the application of these methods, discussion and evaluation of results.
|
|
|
Characterization of perovskite solar cell materials by transient techniques
Nakládal, Martin ; Zmeškal, Oldřich (referee) ; Novák, Vítězslav (advisor)
This thesis deals with the study of the lifetime of charge carriers in perovskite single crystals. The principle of perovskite solar cells is formulated, their main structures are characterized and the history of the development of perovskite solar cells is summarized, especially in terms of efficiency. The properties of perovskite single crystals with perovskite solar cells are compared. For measurement purposes, transient methods, impedance spectroscopy, load characteristics and the dependence of sensitivity and photocurrent on the wavelength of incident radiation are described. The practical part deals with the method of measuring and evaluating the lifetime of charge carriers in the investigated perovskite single crystals.
|
|
|
Impedance spectroscopy characterization of perovskite solar cell materials
Křečková, Jitka ; Vanýsek, Petr (referee) ; Novák, Vítězslav (advisor)
The Master‘s thesis deals with the topic of perovskite solar cells with the main focus on the materials used for the active layer. In the introductory part, the electrical and optical properties of halide perovskites are described and specific examples of perovskite crystals are introduced. The description of impedance and photoimpedance measurement methods used for characterization of perovskite solar cells is also included in the thesis. The measurement of electrochemical impedance spectroscopy was conducted on four perovskite crystals and equivalent circuit was formed to fit the obtained data. Parameters of the circuit elements were acquired using the fitting method and were further evaluated in experimental part of this thesis.
|
|
|
Charakterizace vlastností perovskitovských fotovoltaických článků
Salaukou, Aleh ; Vanýsek, Petr (referee) ; Novák, Vítězslav (advisor)
This work deals with photovoltaic cells based on perovskite. The theoretical part describes the basic properties of perovskite structure, its composition and its using in solar cells. In addition, the work provides basic information about photovoltaic and silicon solar panels. Information on photovoltaic cell measurement methods such as impedance spectroscopy, photoimpedance spectroscopy, and load curve method are also presented here. Practical part of the Bachelor work deals with the application of measuring methods described in the theoretical part, the determination of equivalent circuits and discussions about the results obtained.
|
|
|
Perovskite solar cells
Poláková, Simona ; Zmeškal, Oldřich (referee) ; Pospíšil, Jan (advisor)
The bachelor´s thesis deals with the study of perovskite solar cells. The theoretical part of this work is devoted to the stability of the perovskite layer and perovskite solar cells, especially chemical and thermal stability are discussed. Furthermore, deposition methods of perovskite active layer were described in more detail. The experimental part deals with the influence of the dropping of the diethyl ether solution during the deposition of the active layer (at different time intervals) on the final efficiency of solar energy conversion, with the preparation of the final perovskite solar cells and with the characterization of the basic electrical properties of the prepared structures.
|
guest ::
