|
|
House on a slope
Chrbolková, Erika ; Novák, Michal (referee) ; Daněk, Lukáš (advisor)
The subject of the bachelor thesis is to elaborate the project documentation for the construction. It is a family house which will be located in the existing development on the outskirts of the village Sobíňov. The building is designed as a single storey, and as it is installed in a sloping terrain, it is divided in height into three consecutive parts. In the first part there is a garage with two parking spaces, the entrance to the building and technical facilities. The second part consists of common rooms and the last part is a quiet zone. The foundation structures are designed as monolithic strips of plain concrete.The Porotherm brick system forms vertical load-bearing and non-load-bearing structures. The ceiling part is designed as a monolithic reinforced concrete slab. The roofing of the building is solved by a single-skin flat vegetation roof. The drawing part was processed in the ArchiCad 20 programme and visualization in the Lumion 10 programme.
|
|
|
The Multifunctional building Hlinky
Jarmerová, Eliška ; Erben, Adam (referee) ; Pavlovský, Tomáš (advisor) ; Sedláková, Markéta (advisor)
This bachelor thesis presents a design of a multifunctional buiding in Brno – Pisárky. The building should be located in a gap site in the street Hlinky. The plot is situated at the foothill of Žlutý kopec near the premises of Brno Exhibition Centre. The southern part of the plot includes the area of terraced houses. The street is 215m above sea level. This project designs a completion of the street housing development with a fitting construction of a convenient size and type of façade. The project takes into account a non-existing and formerly pulled-down 19th-century object of value concerned by heritage conservation. The former building was significant for its indentation in the line of the adjacent buildings. In the design I try to point out at this element applied for the whole height of the building. The building facade division follows the elements applied for the other objects in the surroundings of the lot. Based on the former analysis, the design utilizes a high potential of the place which had not been met before, mainly its easy centre and transport accessibility, south-facing slope, high density of population in the area of the exhibition centre as well as as university hostels. This multifunctional building is designed to function in three ways – as an office, a living place and a shop with a buffet providing cooked meals. The design preserves and recultivates a garden which will function as an orchard with furniture. The first floor of the object is designed as a reinforced concrete frame which is filled with a wall of cut vertically perforated brick blocks with mineral wool insulation and completed with ventilated façade made of facing bricks. The building has six aboveground floors and one underground floor. The height of the designed building overtops the neighbouring buildings, which is hidden due to the division of the building facade into smaller areas whose function is to achieve better setting of the mass of the building into the frontage.
|
|
|
Detached house - Újezd u Tišnova
Skřek, Daniel ; Rebrova, Tatiana (referee) ; Kacálek, Petr (advisor)
In this thesis we study a family house together with a service station for cars as one building. The house is designed as single-staired with a cellar. The roof is set to be flat. The layout (3 rooms and kitchen placed in one of the rooms) is meant for four family members. The house is built from earthen blocks Porotherm and the ceiling is composed of earthen plugs Porotherm. Wall constructions bellow the terrain level is solved by losing permanent insulated formwork. The object is based on concrete line. The house is situated in a sloping terrain towards east in Újezd u Tišnova.
|
|
|
Multifunctional house in Brno
Peštálová, Lucie ; Vostrejž, Dušan (referee) ; Boleslavská, Yvona (advisor) ; Bantová, Sylva (advisor)
The subject of this bachelor thesis is a new building solution of a multifunctional house founded on the edge of „the Old“ Líšeň in Brno as a follow up to a panel development of the residential buildings from the 80’s years of the last century (so called „the New“ Líšeň). The design is based on the position on undeveloped steep slope overgrown by green vegetation, on the form of the surrounding buildings and also on needs for the creation of family housing as well as the needs of residents of the particular district. The suggested object includes two different units – the solution of eight flats, including one accessible flat with housing equipment and space for services – café and fitness centre. The multifunctional house consists of two above-grounf floors, basement and of the flat roof. It is located in the northern part of the slope, where is the best available from the traffic and besides provides a remarkable view on the city. The object creates a symetrical compact matter, which with each ground floor stands back, so that the spacious terraces could be established. The dominant of the project is a covered passage, which intersect the matter in the axis, so it takes a shortcut through the building. The place serves as a hotel-based, relaxing space constituted by fast-food stands and playground. The southern part of the covered passage continues in a hotel-based stairway allowing undisturbed recreation. The intention of the project is a formation of a compact unit, which separates the two operations, so that the layout of communication remains and the best orientation to all cardinal points is enabled. In the basement is situated the café with an outside terrace and fitness centre, both with the entrance from the southern side. In the other above-ground floor are to be found dwelling units accessible from the north on the covered exterior stairways. For the structural system is utilized the modular system Intecon, which consists of steel frames enabling a
|
|
|
High standard detached house
Prokop, Radek ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
My Bachelor thesis deals with project of a family house, which is setted in a slopping terrain. My project corresponds to the scope of documentation for the execution of construction, which further determines dividing into single units. It says a lot about about two-floor brick house. Roof construction above second above ground floor is single-layer flat roof. This disposal solution allows comfortable living for 4 people.
|
|
|
Family house in Chrudim
Doležal, Filip ; Šafářová, Markéta (referee) ; Hlavačka, Tomáš (advisor)
My bachelor‘s thesis concerns a project of a family house that is embedded into a sloping terrain. The work is to the extent of the relevant project documentation which also determines the division into separate units. The designed house is special mainly for its construction system made of prefabricated concrete skeleton. This system has a strong effect on the overall character and offers many specific details on which an emphasis is placed in my work.
|
|
|
House on a slope
Luštický, Jan ; Kalábová, Tereza (referee) ; Šuhajda, Karel (advisor)
The project has been prepared complete documentation of new building to house the level of documentation for building construction. House is designed for a family of four. Built-up area is 213.9 square meters. Enclosure is designed as a lightweight extensive green roof. The house is lined with ceramic bricks Porotherm. The proposal emphasizes the object static and layout, fire safety, energy saving and safety in use. Drawings were processed in software for design - ArchiCAD
|
|
|
Bock of Flats
Olžbut, Peter ; Mazánek, Pavel (referee) ; Mazánek, Pavel (advisor)
Master's thesis - Apartment house - is drafted as building documentation under relevant laws and standarts. The project processes documentation of a new Apartment building. It is designed as a brick building with basement and three aerial floors. The roof is designed as a flat and walkable roof.
|
|
|
Family house with a hinterland for cyclists
Klemeš, Tomáš ; Jurutková, Zuzana (referee) ; Remeš, Josef (advisor)
The project is a two-storey family house situated on a hillside. The first floor is designed as a residential unit with its own entrance, which is connected with the basement area by a double staircase. In addition to the staircase, the basement comprises technical facilities and a garage. Moreover, a summer fast food bar, bicycle rental and repair shop are situated in separate premises on the street floor. The building is based on strip foundations made of plain concrete. The construction consists of breeze blocks and ceiling panels made of light ceramic concrete. The structure is covered by a saddle double-shell ventilated flat roof with a light upper coating.
|
|
|
Family House on the slope
Dvořák, Jakub ; Bečica, Radek (referee) ; Drobeček, David (advisor)
In the bachelor´s thesis, a design of a house situated in the slope is presented and its detailed project documentation is worked out. The thesis is divided up according to the valid laws, norms and regulations required for realization of the project. The unique feature of the house designed is its location in the sloping terrain of the plot: the roof of the building gradually connects with the surrounding terrain. Due to such an innovative solution, a vast number of technical and constructional details needed to be dealt with and were described in the thesis.
|
guest ::
