|
|
Apartment hotel
Prívara, Marek ; Mátl, Miroslav (referee) ; Hlaváček, Pavel (advisor)
The subject of this thesis was to develop project documentation for building construction. It is a new four-storey house with restaurant, situated on the outskirts of the village Bridges at Jablunkova. The building is brick, has a two-level gable and shed roof, consisting of wood roof system. Slope of the parcel on which the house is located, allows the building of the plant into the ground. Because of this it is possible to enter it, either the main entrance to the first floor or building around and over the summer terrace come directly to the restaurant on the second floor. Above it are two more floors for hotel guests only, a total of 10 accommodation units with its own bathroom.
|
|
|
Residential building in Zlin
Jelínek, Roman ; Sedlák, Radek (referee) ; Benešová, Romana (advisor)
The aim of this thesis is to elaborate project documentation for new construction of low-energy residential building with 16 luxury apartments, apartment without barriers and with pharmacy of basic type. It is a four-storey detached building without basement, with flat roof, roof terraces and with balconies. Residential building is located in one of the most enjoyable parts of the city of Zlín – Jižní Svahy II in the vicinity of Central park with bicycle path and with beautiful view of the Zlín. The building will be located on land plot No. 2144/46, where is still situated unfinished building "Torso" from the late 80 years. The residential building is designed in brick system Heluz, ceiling construction is made up of prestressed hollow core slabs, perimeter walls are with external thermal insulation composite system and external doors and windows are made of plastic and aluminum with triple glazing. For heating and water heating will be utilized renewables energy, such as heat pump and solar collectors. Residential units with three residential rooms are designed with a forced ventilation by means of ventilation units with heat recovery. The building also uses modern shielding elements such as outdoor blinds and horizontal sun breakers. The part of the project are also disposition studies, seminar work and energy part.
|
|
|
Solution of transfer junction on the Konečného square in Brno after putting the line NSRLD into operation
Rosík, Jan ; Veselý, Josef (referee) ; Smělý, Martin (advisor)
My master‘s thesis is concerned with study of location of tram stop, part od North - South Railway Line Diameter, which is supposed to be in underground level below Konečného square, important transfer junction. According to this location find out the best place to situate pedestrian exits and elevators in nearby streets Nerudova, Kotlářská and Veveří. After building up the station, pedestrian transfers will be safer and time to get into the centre of Brno/ job for commuter people will be shortened. This master thesis also deals with enlargement of tram islands, repositioning of trolleybus stop from Kotlářská street, movement of pedestrians in area and optimization of traffic lines.
|
|
|
Drive model for EC motor elevator analysis
Javořík, Zdeněk ; Koláčný, Josef (referee) ; Vondruš, Jiří (advisor)
The master thesis encompasses the possibilities of position evaluation and drive control with the aid of SMI work enviroment. Furthermore the thesis is directed to create a program through a designed control algorithm. The work is realised on the elevator model with electronically commuted motor. An incremental scanner is used as the position sensor. The motor control unit is set up and programmed in the SmartMotorInterface software. In the next part, measurements with altered parameters are conducted. On the basis of these measurements the influence of parameters on the positioning process and its accuracy is evaluated. At the conclusion of the work, a design of laboratory task for educational purposes is created. The laboratory task is composed in such a way, that students would become familiar with the SMI work enviroment and would be able to practicaly test the setup of incremental position sensor and motor control with the aid of entered algorithm.
|
|
|
Bucket elevators
Žák, Zdeněk ; Jonák, Martin (referee) ; Malášek, Jiří (advisor)
This bachelor thesis deals with the transport equipment using as the main transport element buckets. To specify this is a device type of elevator, conveyor, digger and excavator, including companies producing these devices. Further work is focused on theoretical and technical approach to calculate where the theoretical part of the thesis deals with the mathematical expression shape layers and logarithmic spiral and in the technical part calculations required to design and determine the parameters of devices. The last section is an overview of transported materials.
|
|
|
Centrifugal bucket hoist
Kotačka, Petr ; Malášek, Jiří (referee) ; Jonák, Martin (advisor)
This bachelor thesis deals with bucket elevator design for transport of dry, loose and non abrasive materials according to given parameters. In the introductory chapter a short search describes the concept of suggested solution. Functional calculation, designs and checks of individual proposed equipment elements are stated in the other chapters. In the design requirements for centrifugal bucket discharge as well as miscellaneous way of filling are preferred. Appropriate drawing documentation is enclosed with this thesis.
|
|
| |
|
|
The conception of tail unit arrangement on aircraft
Podhorský, Matěj ; Pejchar, Jan (referee) ; Píštěk, Antonín (advisor)
This bachelor thesis provides a basic overview of empennage layout designs. It contains a theoretical introduction explaining terms necessary to understand the empennage problematics. In the main part, the most frequent empennage layout designs are described, each one with a brief description of construction, its benefits and drawbacks and airplanes with such empennage layout design.
|
|
|
Construction of ultralight aircraft control
Marek, Ondřej ; Šplíchal, Jan (referee) ; Juračka, Jaroslav (advisor)
This bachelor thesis deals with control of ultralight glider D-14. Based on the research of applied construction solutions of ultralight airplanes I designed my own solution of the specific elements and construction nodes. Also, in accordance with the UL-2 directive load of main control systems are determined. 3D model of the glider fuselage with the elements of the particular assemblies is attached.
|
|
|
Laboratory exercises of mechanical elevator model
Arnošt, Petr ; Němec, Zdeněk (referee) ; Marada, Tomáš (advisor)
This bachelor´s thesis deals with design and manufacturing model of elevator. It contains information about management of this model with PLC Siemens, Simatic S7-200. Design was made on a computer in Inventor - 3D modeling program. Design of electronics was also made on computer in Eagle program. Model has movable cockpit, opening doors and signal and control elements. This thesis describes the design because of choice of specific decision. It deals with the production of individual components and management model.
|
guest ::
