|
|
Energy-efficient house for doctors and nurses in the city of Kroměříž.
Dvořák, Petr ; Blasinski, Petr (referee) ; Rubinová, Olga (advisor)
The aim of my thesis is to design the project documentation of an energy-efficient house for doctors and nurses, located near the hospital in Kroměříž. The work is divided into three parts. The first part focuses on the architectural and construction design of the building. The second part deals with the design of the technical equipment of the building and its layout. The third part deals with the design and comparison of different cooling sources. The building is a two-storey building with a flat, vegetated roof and its design is in the building permit stage. On the ground floor there is a bistro, a dining room with food preparation, technical rooms and 3 apartments. On the second floor there are 9 apartments and a lounge. In the middle of the building there is a circulation area with a staircase, a glass elevator and a large skylight that illuminates the whole area. Heating is provided by a gas condensing boiler. Ventilation is provided by three air handling units. A hybrid cooling system with heat recuperation from the refrigerant is designed. For partial electricity demand, 62 photovoltaic panels are installed on the roof of the building. The third part deals with the design of alternative cooling solutions for the building. Multi split, VRV and water cooling system with roof top chiller are proposed in addition to the already designed hybrid system. These four alternatives are compared with each other and the most suitable option is then designed.
|
|
|
Studying the behavior of concrete at high temperatures
Tillová, Jana ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
This master‘s thesis is focused on the study of the behavior of cement concrete at high temperatures with a focus on monitoring the impact of aggregate and cement type. This work describes the processes in aggregates and cement matrix at high temperatures. The theoretical part describes the selestion of a suitable aggregate and cement for the surroundings with potential exposure to high temperatures. In the experimental part is given design of composition of a concrete with two types of aggregates and four cements. It has been suggested 8 recipes. Changes were observed densities, compressive strength and tensile strength in bending, calculate the velocity of propagation of waves with ultrasonic pulsed method. Also evaluated the appearance of the surface samples after thermal load – cracks on the surface and measure the maximum crack width.
|
|
|
Multifunctional House
Šimek, Pavel ; Čtvrtníčková, Kateřina (referee) ; Kolář, Radim (advisor)
Master´s thesis is designed as a complete documentation of a multifunctional house. The multifunctional house is located in the town Nová Paka and functionally designed as a restaurant, garages and 8 flats. Built-up area is 886.95 square meters. The building is covered with a flat roof. The supporting structure is designed prefabricated reinforced concrete frame. Infill walls are made of clay blocks Porotherm. The house is insulated contact system ETICS. The thesis contains a static layout, fire safety, energy saving and safety in use. Drawings were processed with software for design - ArchiCAD.
|
|
|
Gel polymer electrolytes with high fire safety
Musil, Michal ; Zatloukal, Miroslav (referee) ; Sedlaříková, Marie (advisor)
This work deals with preparation of PMMA based gel polymer electrolytes with high fire safety and high ionic conductivity. In the theoretical part of the work GPEs for Li – ion accumulators, fire safety tests, fire retardants are mentioned. Preparation of GPEs, electrical and other properties are described in the experimental part. Furthermore, new possible methods of gel preparation are discussed.
|
|
|
The family house in Hrádek
Pyszková, Dorota ; Malý, Radek (referee) ; Krupicová, Jana (advisor)
The bachelor thesis deals with the project documentation of a new build house with regard to the requirements of thermal techniques, fire safety and acoustics. It is a brick, detached family house with a gable roof, which has two floors and is a partial basement. The building is based on foundation strips. The project also includes essay dealing with the thermal insulation of pitched roofs.
|
|
|
Lodging house for cyclists
Jirka, Petr ; Peterka, Tomáš (referee) ; Müller, Jan (advisor)
The subject of this thesis is a design of a newly built guesthouse on a bicycle path in the village Spálené Poříčí. The building is designed in a gently sloping terrain towards the west. The main entrance faces the south. It is an object without a basement and with two above ground floors. The structure of the building is a transverse wall system made of ceramic fittings. Other walls are also made of ceramic fittings. The entire building is based upon the stripe foundations and footings. Pension is covered in the part of the accommodation and in the restaurant part with a gable roof. For the restaurant, a terrace is designed on the west side of the building. In this thesis, static and building equipments are solved. The building is also evaluated in the terms of lighting, thermal, acoustic requirements and the fire safety of building is also solved.
|
|
| |
|
|
Kindergarten
Doležal, Lukáš ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The diploma thesis on the topic Kindergarten is processed in the form of project documentation for the implementation of the building. The building is designed to plot 12288 in the cadastral Vsetín. It is a new kindergarten with two floors. The building is brick, It is covered by single-layer flat roof. The building contains three classes for a total of 75 children, also has its own kitchen and pottery.
|
|
| |
|
|
The health center
Pyszková, Dorota ; Krupica, Roman (referee) ; Krupicová, Jana (advisor)
The Diploma Thesis deals with project documentation of a newly built health centre with regard to the requirements of thermal technology, fire safety and acoustics. It is a brick, detached, flat roof and three storey building. The construction is built on the foundation stripes. A seminar work is a part of the thesis. It includes all requirements that have to be complied during designing the health center. Next parts of the project focus on different specialisations processed at Institute of Concrete and Masonry Structures and at Institute of Building Services.
|
guest ::
