|
|
Data logger
Dráb, Dominik ; Pazdera, Ivo (referee) ; Ctibor, Jiří (advisor)
This master's thesis deals with design of universal data logging device. The work proposes the design of device architecture and describes individual systems and components, that are necessary for data logging. Logger is designed as a mobile device, with ARM microcontroller at its core. Thesis specifies requirements for device in terms of performance and versatility. The device uses modular construction, as it comprises multiple PCBs. The thesis describes their design and also design of the mechanical construction of data logger. Designed device has been realized and assembled. Software design for microcontroller is also part of the thesis. In the last part, measurements to determine achieved parameters of the device are conducted.
|
|
|
Automation of MitM Attack on WiFi Networks
Vondráček, Martin ; Lichtner, Ondrej (referee) ; Pluskal, Jan (advisor)
Tato bakalářská práce se zaměřuje na výzkum v oblasti bezpečnosti bezdrátových sítí. Práce přináší studii široce využívaných síťových technologií a principů zajištění bezpečnosti bezdrátových sítí. Analyzované technologie a způsoby zabezpečení trpí slabinami, které mohou být zneužity k provedení útoku MitM . Práce zahrnuje přehled dostupných nástrojů zaměřených na využití jednotlivých slabin. Výsledkem této práce je balíček wifimitm a CLI nástroj, oba implementované v jazyce Python. Balíček poskytuje funkcionalitu pro automatizovaný útok MitM a může být použit jako součást dalšího software. Nástroj wifimitmcli je schopen úspěšného provedení plně automatizovaného útoku bez jakéhokoli zásahu útočící osoby. Tento výzkum nachází využití v oblasti automatizovaných penetračních testů a forenzního vyšetřování.
|
|
|
Telemetry for Dragon IV Formula
Bezdíček, Jan ; Petrlík, Jiří (referee) ; Šimek, Václav (advisor)
The aim of this master's thesis was to design and construct complete telemetry system for the student formula Dragon IV constructed for international Formula Student competition. At first, the work deals with the measurement of the physical quantities, telemetry system and automotive sensors of the formula, their mutual communication and communication with the CAN bus. It also describes the procedure of hardware design including choosing right inertial sensors and a GPS module and their using in telemetry system. The work contains materials for production of two-layer printed circuit board extending the microcomputer BeagleBone Black on the inertial sensors and the GPS module. The bigger part of the telemetry system is the firmware for hardware and software for the computer user. Both written in programming language C++ and C# are included in this work as well. This user application serves for wireless receiving data from the hardware and their showing and logging. In addition this user application can be used for wireless hardware configuration. The final product is the complete telemetry system and it is suitable for selling to end customer.
|
|
|
Measure antennas for GSM and Wi-Fi bands
Hurt, Martin ; Láčík, Jaroslav (referee) ; Mikulášek, Tomáš (advisor)
This bachelor’s thesis deals with the design of the measure antennas for GSM900, GSM1800 and Wi-Fi bands. In the first step, the work is focused on the design of two antennas for GSM900/GSM1800 bands and for Wi-Fi band in the CST Microwave Studio. In the second step, both antennas are fabricated and validated by the measurements. The measured results of the realized antennas are affected by asymmetric currents. In the work, the possibilities of the eliminating of the currents are discussed in detail.
|
|
|
Security Analysis of Home IoT Network
Čikel, Tomáš ; Jeřábek, Kamil (referee) ; Pluskal, Jan (advisor)
This work focuses on the issue of the security in home IoT network. Specifically, it focuses on the security issues of commercial IoT devices and their automation systems. In the work itself, it was firstly analyzed and identified specific threats specific for our network. To address these threats, the original automation systems and firmware on the devices were replaced by open-source implementations that were configured to address discovered threats. Although, there are still several security issues in a network with an open-source implementation, a large part of the security issues which were discovered has been eliminated. The results of this work allows to configure a home IoT network using an opens-source automation system and firmware and proves that such a network is more secure than the network where the original factory-supplied automation systems and firmware on devices are used.
|
|
|
Wireless Sensory Network Using LoRa Technology
Mikulášek, Michal ; Pokorný, Jiří (referee) ; Škorpil, Vladislav (advisor)
The bachelor thesis focuses in the first half on the Internet of Things and the available wireless technologies for the Internet of Things. Each technology is characterized by its features, pros and cons, as well as the possibilities of using it in the Internet of Things. In the second half of the thesis, a practical design and construction of a LoRa network, consisting of a sensory and a central unit, is carried out. The parts of the solution are designed wiring schemes, printed circuit boards and detailed photo documentation. Additionaly the software solutions for both types of units are described, with detailed descriptions of the proposed features. The maximum possible range is tested and documented for the entire solution. Subsequently, a detailed measurement of the power consumption of the sensor unit is carried out and an extensive estimation of its battery life for a selected battery.
|
|
|
Analysis of Wi-Fi traffic
Bakó, Zdeněk ; Pospíšil, Ondřej (referee) ; Pospíšil, Jan (advisor)
This bachelor thesis deals with the capture and analysis of wireless traffic of Wi-Fi networks. The aim of this work is to describe the possibilities of capturing and analyzing the operation of Wi-Fi networks. It describes the IEEE 802.11 standard, its features such as architecture and current standards. A selection of a suitable router is performed on which traffic capture and analysis is performed. Some open-source firmware for routers is compared and the most suitable one is selected. Tools for capturing and analyzing Wi-Fi network traffic are compared and described. The differences between the promiscuous and monitoring capture mode and their possibilities of use are described. Finally, there are described options for analyzing captured 802.11 frames.
|
|
|
Multimedia Services in Mobile Networks
Kovář, Petr ; Molnár, Karol (advisor)
Long time ago, there were developed methods which can allow fast exchange of information at the longest distance possible. Until recent time, the possibilities of long way communications were very limited. There were technological and financial limitations mainly. With telegraph, telephone and the newest – computer networks invention, the telecommunication services became cheaper and much more comprehensive. With accession and high scale spread of internet, the role of communications is much more important. The most actual trend is mobile internet and connected multimedia networks and their instant accessibility from anywhere. On the first side there are classical telecommunication networks as GSM, UMTS, on the other side there is very strong alternative in shape of WiMAX and WiFi networks combination. For the usage of multimedia services in that networks is very important to handle their prefferization over other traffic, which is very difficult task even on wireless media. For the finding of new processes and methods, which can allow it, there is, at fist, the need for highly accurate and authentic mathematical models. In this doctoral thesis is mapped actual state of the art and proposed the new mathematical model of Distribution Coordination Function, which is much-frequent used as access method in 802.11 networks, Wi-Fi.
|
|
|
Control of mobile robot
Vožda, Ondřej ; Skula, David (referee) ; Šembera, Jaroslav (advisor)
This thesis describes questions of developing the system for remote and presence control of a mobile robot (wheelchair). It is concerned with choice of a proper protocol for communications via wireless network, transmission of images from webcam and data from joystick. Next objective of the thesis is recognizing surrounding obstacles using ultrasonic range finders. Thesis describes observation arisen from using this type of sensors. One of the most important points of the thesis is to discuss the safety of usage of the developed system. In conclusion, possibilities for future development are stated.
|
|
| |
guest ::
