National Repository of Grey Literature 38 records found  beginprevious21 - 30next  jump to record: Search took 0.02 seconds. 
Four Cylinder and Six Cylinder Engines for Agricultural Tractors
Potůček, Šimon ; Ramík, Pavel (referee) ; Dundálek, Radim (advisor)
This bachelor’s thesis summarizes actual technologies and trends by tractor engines and mention product portfolio of the most important tractor engine’s manufacturers used in the Czech Republic.
Technologies for NOx Cut-down in Exhaust Gases
Drábik, Michal ; Janoušek, Michal (referee) ; Dundálek, Radim (advisor)
This bachelor thesis deals with the issue of reducing nitrogen oxides emissions in exhaust gases and explains the principles of their reduction. The main aim of the thesis is to analyse and describe systems that are designed to reduce their amount. The following chapter provides examples of solutions for these systems for specific drive units. At the end of the thesis, there is a reflection on possible future development in this sphere.
Up-to-date off gas cleaning system for Medical Waste-to-Energy units
Kotas, Dan ; Krňávek, Martin (referee) ; Krejčí, Tomáš (advisor)
This master's thesis deals with current situation of medical waste management in the Czech Republic and it also analyzes the quality of existing units for thermal treatment of the medical waste. In the second part of the thesis, available off-gas cleaning methods were described as well as the emission limits for waste incineration, which correspond to the legislative regulations effective in the Czech Republic. These emission limits are considered as input data for off-gas cleaning system design. In the main part of this thesis, two technological solutions of off-gas cleaning methods for Up-to-Date medical waste incineration unit were designed. The unit is designed for energy utilization of 1400 tons of medical waste accumulated during one year in a regional hospital of model region. From given input parameters, two appropriate apparatus concepts were created. After that, both concepts were evaluated either form energetic point of view as well as from material one. From these evaluations, key apparatuses of both concepts were designed which provided necessary design dimensions for further investment price estimation of each individual key apparatus. In the conclusion of this thesis, the best solution of an off-gas cleaning method was picked according to the comparison of operating and investment costs.
Vyhodnocení přesnosti vyhledávání říje a zvýšení míry zabřeznutí krav využitím systému zaznamenávajícího pohybovou aktivitu
BUREŠOVÁ, Michaela
In connection with growing modernization of technological systems in milk cow farming it comes to progressive innovations within monitoring motor activity. The motor activity is besides other things connected with the possibility of searching for estrus and detecting and eliminating false estrus. It is possible to suppose, that it becomes evident with increased accuracy of searching for estrus and bigger success rate by cow fertilization. It was discovered, that SCR system helps to improve reproduction. By reproduction indicators favourable values were recorded, namely: days open - 85 days, calving interval - 420 days to first service - 121 days. This year results get considerably better if compared with results from last years, when SCR system was not implemented. Success rate of insemination has risen by 36 %. It is evident, that measuring of motor activity enables us to precisely determine the right time of ovulation and therefore it increases the percentage of successful fertilization.
Aktivita přežvykování dojnic ve vztahu k jejich vybraným fyziologickým funkcím
RŮŽKOVÁ, Michaela
One of the most important livestock production sectors in the Czech Republic is the cattle breeding, which has always been one of the most demanding fields in the history of breeding, and its results are, to some extent, decisive for the economic success of agricultural products. Cattle are bred primarily for milk, meat and semen. The aim of this bachelor thesis was to obtain basic data and to formulate findings about dairy cows' ruminating activity in relation to their health condition, milk yield and reproduction. Regular monitoring of the rumination of dairy cows can greatly improve the state of these individual physiological functions, and this leads to maintaining and improving herd productivity. The work was carried out in the Agricultural Business Cooperative Mrákov, at the farm in Tlumačov. At present, the company manages approximately 2 470 ha of agricultural land. The cooperative mainly focuses on cattle production and breeds approximately 900 dairy cows of the Holstein breed, of which there are about 250 cows in the stables in Tlumačov. A total of nine Holstein dairy cows were included in the observation and they were divided into three groups according to observation of their ruminating activity. Group 1 was monitored for changes in rumination in relation to health status. In the second group of dairy cows, rumination was observed in connection to reproduction. In the third group, there were dairy cows in which rumination in relation to milk yield was studied. The actual observation took place between 27 January 2018 and 17 March 2018. The SCR Heatime ? PRO device was used to monitor the rumination. Thanks to the SCR collars containing an accurate sensor, the health status, reproduction and dairy yield of selected dairy cows could be evaluated. Since the SCR system evaluates, for more accurate results, not only the rumination activity but also the movement activity, the cows' movement is also monitored, as a secondary factor, in the practical part of this work. According to the evaluation of the activities and the subsequent evaluation of the dairy's health status, reproduction and dairy performance, it was found that the SCR system recorded all drops and increases in activity and gave a timely report of the dairy status, thereby verifying its functionality and its possible use in the observation of rumination and movement activity. The results revealed that all dairy cows in the first group, where the state of health was observed, contracted mammary gland inflammation (mastitis) and were subsequently treated with antibiotics. In the second group, in which reproduction was monitored, it was found that the cows number 30 and 76 had a regular estrous cycle, and the cow number 190 had an irregular cycle, but all of them were inseminated. Lastly, in the third group, where dairy cows were observed in relation to their milk yield, it was found that each of the selected dairy cows had a problem with its health status after calving, which had an effect on its milk yield.
Solvency II: solvency in insurance
Čáha, Pavel ; Cipra, Tomáš (advisor) ; Mazurová, Lucie (referee)
This thesis is dedicated to Solvency II, a regulatory framework for insurance and reinsurance companies effective in European Union. Firstly, it explains the notion solvency and also describes the principles of the regulation itself. Another part is focused on the calculation of solvency capital requirement and minimal capital requirement, using standard formula. The capital requirements are derived on the level of risk modules and their submodules. Furthermore, the topic of technical reserves is discussed and emphasis is placed on the derivation of mean square error of prediction. Described methods are Chain-Ladder and Bornhuetter-Ferguson. The last part of the thesis includes the calculation of capital requirements for real data. A program SolvencyII.xlsx that shows particular derivations is enclosed.
Draft Dry Bottom Boiler for bituminos coal, 540 °C, 9,4 MPa,feed water t = 170 °C
Podhorský, Jakub ; Nechvátal, Ondřej (referee) ; Skála, Zdeněk (advisor)
This masters’ thesis deals with a thermal design of a draft dry bottom boiler for bituminous coal that should replace a disassembled boiler in a current boiler room. Application of SCR is intended in order to reach emission standards of NOx.
NOx Reduction System
Karafa, Pavel ; Bradávka, Marek (referee) ; Svída, David (advisor)
This diploma thesis deals with the issue of nitrogen oxides emissions in exhaust gases and possibilities of their reduction. The task of the thesis was analysis of systems for NOX reduction by contemporary diesel engines, design and construction of NOX reduction device for given diesel engine, then verify functionality of this system compiled from commercially available components. In the last part of thesis available measurements will be made with an analysis of achieved results.
Possibilities of elimination of residual ammonia content from technological water in power plants
Hajzler, Jan ; Bartoníčková, Eva (referee) ; Opravil, Tomáš (advisor)
This master thesis aims to study the possibilities of eliminating, or separation of ammonium shares from technological water of plants, where is introduced a secondary method of flue gas denitrification (SCR, SNCR). The need for elimination of ammonium shares arose after introduction of emission cap, which have been tightened since January 2015. The denitrification technologies were installed on devices that did not comply with the new limits. The theoretical part of the thesis deals with the description of combustion processes, as a fluid, and high temperature combustion of solid fuels, mechanisms of emissions and their reduction options. At the conclusion of the theoretical part is discussed the contents of the ammoniacal nitrogen in waters used in electricity and heating facilities to transport, or from which are separated by solid products of some processes such as desulphurization. There are also discussed some options for removal of ammonium salts from technological waters. Experimental part deals with finding appropriate method of determination of ammoniacal nitrogen, and the possibilities of its elimination by conversion to insoluble compound. Last but not least, the work deals with the evaluation of the sustainability of the proposed solutions. And as well as the real possibilities of their application in practice.
Modelling and Design of the IC`s ESD Protection Structures
Běťák, Petr ; Sládek,, Petr (referee) ; Bartoň,, Zdeněk (referee) ; Musil, Vladislav (advisor)
The thesis introduces new semiconductor structures that are used as protections against Electrostatic Discharge occuring in integrated circuits. The fundamental structure for modeling and simulation has been lateral Silicon Controlled Rectifier. This SCR structure has been modificated to enable tuning of the triggering and holding voltages by changing geometrical mask dimensions. On the base of modeling and simulation the new proposed structures have been published. Also several protection structures have been designed to be manufactured and measured on a testchip. The final electrical behavior has been verified by measurement. Finally, the focus has been aided to protection circuit with bipolar transistor. This approach has been also simulated and verified by measurement. Advantages and disadvantages of the proposed protection structures are commented in the thesis.

National Repository of Grey Literature : 38 records found   beginprevious21 - 30next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.