|
|
Vila - apartment house
Selivorstov, Pavlo ; Klimecký, Martin (referee) ; Gerö, Jiří (advisor) ; Pěnčík, Jan (advisor)
The bachelor's thesis follows up on the studio assignment from the second year of the bachelor's study. This is a villa building in the Brno-Líšeň district. The plot is located on its outskirts near the Marian Valley. During the design, it was necessary to take into account the specific northern slope of the plot, and therefore make the most of a small amount of natural light. The location of the villa completed the corner of Ondráčková Street with Zlámanky Street. The proposed building contains three floors. Parking is provided outdoors on a paved area. The proposal contains the Documentation for the construction and the Documentation for the building permit. Viladům contains a total of thirteen housing units. Ten units are flats 3 + kk and three 1 + kk. These can also serve as an apartment or studio. The villas are designed from the Porotherm system, supplemented by reinforced concrete structures. The material solution is very simple and clean. The facade has white plaster, windows wooden shutters that open horizontally. The slope of the land is used for roads and a garden, which is located in the southern part of the land, where the stairs lead. The aim of the work was to design modern housing on the outskirts of Brno-Líšeň.
|
|
|
Apartment House
Němec, Nikola ; Karlík, Štěpán (referee) ; Lavický, Miloš (advisor)
This bachelor’s thesis solves a project documentation of Apartment House and contains appurtenances according to valid regulations. The house is designed as a detached house, without basement. It has a non-standard size and is covered with a flat vegetation roof. The house has five floors with balconies. The house has 12 dwelling units. On the first floor is accessory apartments: bicycle and pram room, utility room, utility room and cellar rooms. In the house is designed a elevator. The house is made of precast concrete frame and infill wall with a contact thermal insulation system.
|
|
|
Apartment house
Antoš, Jan ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
The master´s thesis "Apartment house" is in form of project documentation containing all appropriateness in accordance with valid regulations. The house is designed as a detached house and without a cellar. The house is rectangular dimension, with a flat vegetation roof. The house has four floors with loggias, balconies and terraces. The house has 10 housing units. On the first floor is the accessory apartments: bicycle room, technical room, cellar room and garage. In the house is projected a lift. The house is made of brick system with a contact insulated system. The part of thesis is a heat-technical opinion, calculations staircase and foundation construction.
|
|
|
Multipurpose facility Olomouc
Ocelík, Tomáš ; Klvaňa, Jiří (referee) ; Eliáš, Luboš (advisor)
This thesis is focused on designing a new multipurpose building with parts used for apartments, administration offices and a bar. The land, which the building is situated on, is located in the city of Olomouc. The structure consist of five above-ground floors and one underground floor, where a garage is designed. The vertical supporting construction are made of reinforced cast-in-place concrete columns, the horizontal of reinforced concrete cast-in-place boards, other vertical walls are made of sand-lime and aerated concrete blocks. The roof is warm flat.
|
|
|
Multifunctional house in Svitavy
Fučík, Lukáš ; Žalud, Petr (referee) ; Štěpánek, Ladislav (advisor)
This project deals with a design of a multifunctional house in Svitavy. The object is designed as a building without a basement, detached house with four above-ground floors. It is fitted into flat terrain. Newly built multifunctional house serves two main functions. The first is the creation of nine housing units, which are accessible from the central staircase and have an individually designed entrance. The second function of the new building is commercial utilization. There are three business premises in the house, each of them has its own sanitary facilities and separate entrance. The roof is designed as single-layered, flat, composed of asphalt strips. The structural system of the building is brick, made of ceramic blocks. The building is insulated with a contact insulation system.
|
|
|
multi-functional building
Navrátil, Tomáš ; Komínková, Kateřina (referee) ; Čupr, Karel (advisor)
The Master’s thesis on the theme „Multi function house“ is drafted as a building documentation according to the relevant laws and standards. The project processes a documentation of a new multi fiction apartment house construction with overall 16 flats. Their sizes are from a flat 2+1 to a flat with 4 rooms and kitchenette. Every flat has a garage and a cellar in the first floor. In the house there are 2 offices with a capacity about 12 employees and also 3 commercial premises. Hairdressing parlor and an Apple store are going to by situated into two smaller premises. In the last premise with 263 m2 of floorspace there is going to be a cycling shop. The project is designed as a brick building without basement. The building has two parts with four floors and these parts are united by a single-storey part. The whole building is symetric. The roof is designed as a platform with tend of 3%. On top of the first floor there is going to be a vegetation roof and a roof teracce with a flagging. On the fourth floor there are going to be roof teracces with ceramic pavement. Over the fourth floor there is going to be a roof cllading laden by pebbles. The house is situated in the town Kroměříž, in the pacific neighbourhood near to the historical town center. The neighbourhood of the object is determined for a building-up of family houses. Nearby the house there is a primary school and an athletic ground. The brick object is designed by a construction system Livetherm on the wall footings. The ceiling constructions are from concrete. The Master’s thesis is made as a project realization of building construction part with studies and design fundamentals. The part of the thesis is also the thermal technical recognition, fire recognition of the object and concept of canalization.
|
|
|
The detached house with cosmetic salon in Doksy near Kladno
Dudková, Jana ; Vlach, František (referee) ; Štěpánek, Ladislav (advisor)
The project deals a detached house with two housing units and cosmetic salon in Doksy near Kladno. The detached house has a partial basement and it has three aboveground floors. Cosmetic salon, entrance to the flats and garage for two cars are located in first aboveground floor. Two housing units are located in second and third aboveground floor. The building is covered with a gable roof. The gable roof has two level of top.
|
|
|
Terraced Apartment Building in Nový Jičín
Kadlec, Jakub ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of the bachelor thesis is the preparation of project documentation for the construction. It is a detached building with three floors and a basement. The house offers 8 apartments, 2 accommodation units, and in the basement there are 4 garages, a cellar for each apartment, a bicycle room, a pram and fitness room. The house has a single-layer flat roof and is lined with a contact insulation system. The dominant feature is the receding structure on the south side, creating pleasant terraces with nice views of the countryside.
|
|
|
Apartment Building in Bystřice nad Pernštejnem
Schauer, Petr ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
The subject of this bachelor's thesis is project documentation for the new construction of an apartment building in Bystřice nad Pernštejnem. The solved object is located on the northwestern edge of the city. It is a three-storey non-basement building. On the second and third floors there are seven residential units, sizes 1 + KK and 2 + KK. On the first floor there are four garage spaces with cellars. It includes three separate cellars, utility room, carriage house and cleaning room. It is a brick building made of sand-lime bricks. The construction system is mixed and based on foundation strips. Ceiling structures are designed as monolithic ceiling slabs. The roofing is designed as a single-skin flat roof structure. The building is also equipped with an elevator and wheelchair access. In front of the building there are four outdoor parking spaces, one of which is for people with reduced mobility. Access to the building is possible through paved areas. The whole building is insulated with the ETICS system. Facade colors are designed in shades of white and gray with anthracite fillings of openings.
|
|
|
Apartment building Polička
Boušková, Zuzana ; Pilík, Václav (referee) ; Brzoň, Roman (advisor)
This bachelor thesis encompasses project documentation of build execution of a new apartment building. Designed building is located on the southeastern OKRAJI of Policka in a newly built location. The apartment building is designed as a detached building with three above-ground and one underground floor in a flat terrain. The building has a total of 9 residential units with layouts of 3 + KK, 2 + KK and 1 + KK. All apartments except the barrier-free have a terrace or loggia and each apartment has a cellar located in the basement of the house. In the basement there is also a technical room, workshop, bicycle and carriage house and a common room. The apartment building is based on reinforced concrete foundation strips. The vertical load-bearing structures are designed from ceramic blocks, in the basement from lost formwork. The ceiling structures are monolithic reinforced concrete slabs. Perimeter masonry above ground level is insulated with the ETICS contact thermal insulation system. The roofing of the building is solved by flat roofs, while above the 2nd floor it is a vegetation roof with a terrace, above the 3rd floor there will be a non-walkable flat roof with a waterproofing layer made of asphalt strips.
|
guest ::
