|
|
Load Flow Calculation and Design of Distance Protection Relay Settings of 110 kV Overhead Line
Jasenský, Filip ; Vaculík, Petr (referee) ; Toman, Petr (advisor)
Bachelor thesis load flow calculation and design of distance protection relay settings of 110 kV overhead line acquaints with the theory calculation of steady operation, short-circuit conditions and a proposal setting the distance protection. The theoretical part is made an example of a simple calculation to show leadership methods of calculation. The practical part is a calculation of steady operation and short-circuit conditions. Short-circuit ratios are calculated for a single operation and parallel operation of transformers in Otrokovice. Calculated using the initial shock symmetrical output from the calculation of short-circuit conditions is verified by short circuit resistance of substations. The practical section setting the distance protection ABB REL 316*4 and compensation earth faults. Calculation of steady state and short-circuit conditions designed basic operational state of the network, for which the design of a distance protection relay settings.
|
|
|
The calculation of the distance protection relay setings for HV line
Doležal, Marek ; Vaculík, Petr (referee) ; Toman, Petr (advisor)
I divided this work into two parts: theoretical and practical. The first part deals with theoretical calculation of setting for distance protection of high voltage line, possible defective states, which can appear on this network, and methods of calculating these defective states. The second part deals with application of the earlier described theory to calculation of distance protection for specified part of the network. The results of this work are all the parameters needed for setting of distance protection for one part of the network.
|
|
|
Simulation of selected power energy phenomena
Kochánek, Martin ; Bátora, Branislav (referee) ; Šlezingr, Jan (advisor)
This bachelor's thesis deals with the operation of dispersed generation of electricity in the electrical network, the possibilities use of virtual power plant and smart distribution grid. The aim of this work is to build a model of electrical distribution networks in the simulation environment. Connect dispersed generation of electricity to the network and simulate events that may occur in the network and the phenomena to measure and evaluate selected parameters.
|
|
|
Calculation of distance protection relay setting for 110kV line.
Bartoš, Petr ; Vaculík, Petr (referee) ; Toman, Petr (advisor)
This work deals with both the calculation of short circuit conditions of 110 kV network in the Czech Republic. This network is divided into two parts, each of which feeds a 400/110 kV substation and the calculation is performed for different locations of a short circuit. The second part deals with the calculation of distance protection settings for one part of this network. The result of this work are the values of network parameters needed to set up distance protection, which protects our individual lines of the network.
|
|
| |
|
|
Calculation of the network steady state on the voltage level 110 kV
Macháč, Petr ; Vaculík, Petr (referee) ; Mastný, Petr (advisor)
This thesis deals with load flow calculation of electrical network 110 kV before and after the connection to the 70MW gas supply and the 58MW steam and gas supply. This grid can be powered from two 400/110kV substations, namely Sokolnice and Otrokovice. The load flow calculation is realized for the power supply either from Otrokovice or Sokolnice. Furthermore, the calculation of the uni-phase and three phase short circuits in the substations of 110kV network is realized in this thesis. The result of the thesis is the assessment of the voltage ratio in the network, current load of the power line and short circuit resistance of the substations.
|
|
|
Feeding power out of 110/22 kV Moravany u Brna substation
Chromík, Aleš ; Beneš, Jan (referee) ; Blažek, Vladimír (advisor)
The aim of this Master’s thesis is the design and reconstruction of the high voltage distribution network for the company E. ON with focus on calculation of the stabilized operation and on the planning of new cable taps from the transformer substation Moravany u Brna. The first part of the theoretical analysis of the work deals with the inclusion of the distribution network into the power system and with principles of development and construction of high voltage networks. The second part includes a general calculation of stabilized operation of the power distribution network and a familiarization with the program PAS Off - Line Bison 4.0. The practical part of the thesis is focused on the calculation of the stabilized operation at the current state of transformer substation Moravany u Brna using the PAS Off - Line Bizon 4.0 V programme. This part also contains the design of six new cable lines which are needed to strengthen the power distribution in the southern part of the city Brno. The closing part of this chapter constitutes of a outdoor and indoor cable line renovation. These cables are connected to the transformer substation Moravany u Brna and a calculation of stabilized operation is also included in this part.
|
|
|
Proposal of the reconstruction of 0,4 kV distribution network in a specific area
Fojtík, Martin ; Beneš, Jan (referee) ; Blažek, Vladimír (advisor)
This Master’s thesis deals with the problem of distribution electrical network with a focus on solving the steady operation of the electrical distribution network for E.ON Brno - Lisen. The calculation is made by using BIZON PAS Off-Line. The first part of thesis is specialized on the distribution of individual LV and MV networks.The second part of thesis is specialized on the general calculation of the steady operation distribution network and describe criteria for the design and evaluation of this network. In the practical part is calculate existing network in selected area in which is located 53 distribution transformers. In the final part is evaluate the status of existing network and perform design optimization and assessment of this network.
|
|
|
The effect of disperzed generation on power quality
Kružík, Martin ; Orságová, Jaroslava (referee) ; Drápela, Jiří (advisor)
This MASTER`S THESIS engages in connecting with dispersed generation into electrical network and their influence on power quality. This thesis sets out to make up simple dynamic model of Wind power station and model of simple network. At this model I would like to simulate influence its working on voltage’s characteristics in addition place. Besides this is necessary calculate voltage’s characteristics according present methods – factory energy rules [PNE]. And these results compare with results of simulation
|
|
|
Economical appraising of run the power from cogeneration units to different voltage level
Doležal, Václav ; Macháček, Jan (referee) ; Baxant, Petr (advisor)
The topic of the thesis is economical appraising of run the power from cogeneration units to different voltage level. There is sloves in the text, how and under what conditions we can find an optimal solution for the deployment of cogeneration units to the electricity network. The main criterion is the loss of networks and their economic evaluation. We are a description of the different types of cogeneration units, the economic balance and a treatise on losses in electrical networks.
|
guest ::
