|
|
CDMA Network Capacity
Pasečný, Jan ; Kejík, Petr (referee) ; Hanus, Stanislav (advisor)
The Bachelor thesis deals with determining which factors influence the capacity of CDMA network. This type of network is now being used worldwide due to its huge increase in capacity when compared to other transmissions systems. The work contains summary of basic parameters of single-cell and multi-cell systems with reference to the capacity. Obtained results are assesed and compared at the end of the work.
|
|
|
Design of optimal utilization of company's data capacities
Odehnal, Tomáš ; Hrbáček, Miroslav (referee) ; Ondrák, Viktor (advisor)
The diploma thesis deals with the problem of storage capacities of server discs in the allowance organization of Brno City Museum. The organization has long-lasting troubles with insufficient capacity of these discs. The aim of this thesis is to analyse the current state and to propose a suitable solution on the basis of the results of this analysis. Further, the suggested measures should be applied as well.
|
|
| |
|
|
VIZIO - dental system automation
Gábriš, Michal ; Šír, Michal (referee) ; Bradáč, Zdeněk (advisor)
This Diploma thesis deals with creation and realisation of extensions for medical dental unit Vizio. Specifically, it deals with electrotechnical solution and software for capacitive keyboard and with proposal of principle of control and regulation of speed for integrated brushless motor. The Diploma thesis contains both the description of used hardware components, and software solution implemented in assembly language. This device is already in commercial use.
|
|
|
Quantification of measurement uncertainty using Monte Carlo
Mareš, Jaroslav ; Šedivá, Soňa (referee) ; Havlíková, Marie (advisor)
This master’s thesis is focused on evaluation of standard uncertanities of measurement by method GUM and Monte Carlo and theirs comparation. In first part of this thesis is made the theoretical analysis of evaluation of measurement uncertanities and proposal of methodology for evaluating uncertainties by Monte Carlo method. In the second part is described direct and indirect measuring of resistance, capacitance and inductance, including evaluation of standard uncertanities of those measurings by GUM and Monte Carlo methods. In the end of this thesis is made comparison of achieved results of spoken methods.
|
|
|
Fractal capacitors properties
Chvíla, Ladislav ; Sedlák, Petr (referee) ; Hruška, Pavel (advisor)
This work is focused on computer simulations of fractal capacitors. The geometry of capacitors and its influence is investigated. Simulations are realized in programs Matlab, SolidWorks and Comsol Multiphysics. There are also several specific examples of different geometrics of capacitors their comparisons and assessment.
|
|
|
Exploring the influence of pressure on the life of lead acid batteries for hybrid electric vehicles
Pospíchal, Martin ; Tošer, Pavel (referee) ; Bača, Petr (advisor)
The lead-acid batteries used in hybrid electronic vehicles HEV operate in high-rate mode in a state of partial charge PSoC. It occurs when the degradation mechanisms related to irreversible sulphation and negative electrodes are a limiting factor in the life of lead-acid batteries. The electrode system was applied to experimental pressure cells of different sizes. Exp. cells were subjected to measurement and evaluation of potential negative electrode, a negative active mass resistance, contact resistance of transition collector - the active mass with the evaluation and measurement of pressure fluctuations within four PSoC runs.
|
|
|
Single-Phase Induction Motor Calculation
Vácha, Pavel ; Vítek, Ondřej (referee) ; Hájek, Vítězslav (advisor)
The master´s thesis deal with the thesis of a single-phase induction motor that is more and more used all over the world. Its aim is assembling the information about this type of motor and its calculation. The content of the first part is the theoretical analysis of a single-phase induction motor and acquirement ways of the stroke moment. Than the work contains a project of basic schema of the single-phase induction motor with an auxiliary phase. The practical part is devoted to an elaboration of demonstration example of the single-phase induction motor with concrete parameters calculation, its method was projected before. Than there is practising successived measuring on the motor of the same parameters made firm EMP s.r.o. Slavkov by Brno in this part. In the conclusion there is the evaluation of the whole process with reached results.
|
|
|
Composite electrode materials for lithium-ion batteries based on LiFePO4 prepared using GAC method
Vilhelm, Ondřej ; Neoral, Jiří (referee) ; Čech, Ondřej (advisor)
Presented work investigates the problem of secondary lithium-ion cells and the different available cathode materials. We have prepared samples of LiFePO4 with the addition of different kinds of carbon materials such as Super P, Vulcan and expanded graphite. We have always created the sample with and without surfactant. Developed samples were compared by measuring electrochemical methods (cyclic voltammetry, charge and discharge cycles and impedance spectroscopy). We also modeled the three-point cell for measuring electrochemical electrode materials.
|
|
|
New electrode structures for alkaline accumulators
Fusek, Petr ; Novák, Vítězslav (referee) ; Vrbický, Jiří (advisor)
Master´s thesis is focused on development of electrodes used in alcaline accumulators, by using new kinds of materials and compounds. Basic possitive eletrode was made of nickel, on this electrode were applied new layers of Ni(OH)2 by using the method called electrodeposition. For electrodeposition was used solution with Ni(NO3)2 in diverse concentrations. Later on, this material was enriched with aluminium admixtures to increase stability of alfa modification in Ni(OH)2. These concentrations were measured and analysed in diagrams. For measurement was used device Biologic. The diagrams were commented with recommendations for production use in accumulators.
|
guest ::
