National Repository of Grey Literature 27 records found  beginprevious18 - 27  jump to record: Search took 0.01 seconds. 
Materials for biodegradable bones based on Fe
Hrabovský, Jan ; Vondrák, Jiří (referee) ; Sedlaříková, Marie (advisor)
The thesis deals with biodegradable bone implants which must have good mechanical properties and also good compatibility with the human body. The thesis contains literary research in the area of bone physiology, biogenic materials and implants for the human body. The thesis focues on the selection of suitable materials for biogenic implants. It is also described the preparation of iron powder mixtures and application onto selected materials. The selected samples were subjected to thermal analysis.
Thermal spray coatings of bioceramics
Kašpárková, Kristýna ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
Bachelor´s thesis is focused on thermal spraying bioceramics. Bioceramic is designed to replace damaged parts of the human body. Practical use is mainly in orthopedics, jaw and facial surgery. This category of materials includes hydroxyapatite, which is characterized by biocompatibility and the ability to form a strong bond between the bone and the implant. The experimental part of the thesis was spraying 40 - pieces of dental implants for the company LASAK s.r.o. Plasma spraying technology was used to apply the hydroxyapatite coating. The required coating thickness was 60 m. The implant was sprayed and cleaned before spraying. Spraying was carried out in the laboratory of plasma coatings dental and skeletal implants ÚST FSI VUT Brno. A dimensional control was performed after plasma spraying.
Results of the realisation of the experiments using the experimental animals
Juhás, Štefan ; Juhásová, Jana
A design of methods to test a functionality of inovative replacements, solution of the replacement incl. implantation and connected agenda.
Biodegradable Mg-based materials for stents and bone implants
Zemková, Mária ; Král, Robert (advisor) ; Stráská, Jitka (referee)
The bachelor thesis is focused on the effect of mechanical processing rotary swaging (RS), specifically on the microstructure, mechanical properties and corrosion properties. The investigation was performed on the magnesium alloy AE42 with a different number of RS passes, which can be useful for medical applications. RS is more efficient and cheaper alternative to different material processing methods producing fine-grained struc- ture. Fine-grain structure with grain boundaries with high angle misorientation was achieved by this process. Microstructure was inhomogeneous - the grain size decreased from the surface to the center. An improvement of mechanical properties with the increase in the number of swaging steps was observed. Processing also led to a decrease in corrosion resistance in this alloy. Microstructure development was investigated by electron microscopy scanning. Development of mechanical properties was characterized by compression deformation tests and microhardness measurements. Linear pola- rization method was used for the interpretation of corrosion resistance. 1
Modern methods of implant manufacturing by Rapid Prototyping technology
Dobešová, Lenka ; Sedlák, Josef (referee) ; Píška, Miroslav (advisor)
The bachelor thesis is focused on modern methods of implant manufactuting by Rapid Prototyping technology. This research describes the possibilities of using unconventional technologies known as Rapid Prototyping methods. These methods make part of Additive manufacturing technologies. The advantages and the disadvantages of those technologies are discribed in this bachalor thesis, as well as comparison with CNC machinig. The project compares different powder materials for EBM technology. This research describes chemical composition and mechanical properties of those powder materials.
Usage of the Fused Deposition Modeling Method for Medical Purposes
Ševčíková, Lucie ; Zouhar, Jan (referee) ; Sedlák, Josef (advisor)
The bachelor‘s thesis deals with the use of medical devices for medical purposes. The first part focuses on the current state of the problem and describes the current rapid prototyping technology. The second part describes an implementation of production of knee joint bones, a 3D printer by using the method uPrint Fused Deposition Modeling and deals with the evaluation of the cost of producing 3D models using the Fused Deposition Modeling in comparison with other current technologies.
Implants for nervous system
Kuruc, Lukáš ; Zatloukal, Miroslav (referee) ; Sedlaříková, Marie (advisor)
This thesis deals with implants for nervous system. The first part of this thesis focuses on theoretical analysis of this issue, makes reader familiar with seriousness of spinal cord injury, its treatments options and regeneration with hydrogel implants. The second part describes experimental manufacturing of implants, testing patency and summary of their properties.
Friction components produced by rapid prototyping
Pečenka, Tomáš ; Škaroupka, David (referee) ; Omasta, Milan (advisor)
The main aim of this bachelor thesis is to make an overview of use of additive technology for production of friction components. The first part is concerned on review of additive methods and type of materials. In the second section are situated applications of this technology for fabrication of friction components. The main goal of last part is research in area of tribology of parts manufactured by additive technology.
Modern methods of implant manufacturing by Rapid Prototyping technology
Trubačová, Pavlína ; Sedlák, Josef (referee) ; Píška, Miroslav (advisor)
This research describes the possibilities of using unconventional technologies known as Rapid Prototyping methods. These methods make part of Additive manufacturing technologies. The project investigates the influences of process parameters on the final part quality and analyses the advantages and the disadvantages of using RP technologies for medical application, mainly for implant fabrication. The objective of experimental part is fabrication of samples by Selective Laser Melting (RP technology). The stainless steel will be used and two parameters will be varied (laser power, component inclination). For final evaluation of mechanical properties, surface quality, Alicona machine, compression test and Vickers’ hardness test will be used.
Overview of rapid prototyping technology for medicine
Jícha, Martin ; Svoboda, Petr (referee) ; Paloušek, David (advisor)
This bachelor thesis is intended to map the current state of technology and the possibility of rapid prototyping in medical use. The first part is focused on the common principle of function of RP technologies. The following section discusses specific technologies essential RP and the level of current applications for medical purposes, including specific examples. Here is an outline of future development of these technologies.

National Repository of Grey Literature : 27 records found   beginprevious18 - 27  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.