National Repository of Grey Literature 33 records found  beginprevious14 - 23next  jump to record: Search took 0.00 seconds. 
Application of Antimony Film Electrodes for Determination of Pesticide Trifluralin
Gajdár, Július ; Fischer, Jan (advisor) ; Vyskočil, Vlastimil (referee)
Antimony film electrode was studied for the use in a voltammetric analysis of organic compounds. The substance chosen as an analyte was trifluralin, which is used as a pesticide. The comparison of different substrate electrodes was carried out between five electrodes, which were gold, silver, copper, polished amalgam and glassy carbon electrode (GCE). Best performance was observed on antimony film glassy carbon electrode (SbFGCE). It provided higher sensitivity and lower limit of quantification in comparison with bare GCE. The antimony film was stable and it provided good reproducibility (RSD = 5.2 %). Parameters of an electrochemical preparation of SbFGCE were optimized. Conditions for determination of concentration of trifluralin were optimized on newly prepared SbFGCE. The best conditions were in a solution of methanol and 0.1 M hydrochloric acid in 1:1 ratio measured by differential pulse voltammetry. The limit of quantification was determined as 1.2·10-6 mol·l-1 . A direct voltammetric measurement on SbFGCE was carried out in a model river sample. Lower limits of quantification were achieved with solid phase extraction (SPE). Recovery values were 86 ± 8 % in deionized water with a preconcentration factor of 125. The limit of quantification was lowered to value 1.1·10-8 mol·l-1 . The extraction...
Determination of benzophenone-3 on boron-doped diamond film electrode
Procházková, Kateřina ; Dejmková, Hana (advisor) ; Vyskočil, Vlastimil (referee)
Voltammetric behaviour of benzophenone-3 on a diamond film electrode doped by boron was studied by difference pulse voltammetry in an anodic area in the Britton-Robinson buffer medium. The influence of supporting electrolyte pH on the determination was monitored as well as the influence of methanol and acetonitrile content in the measured sample. pH 12 was selected as the optimum value for the determination. Methanol did not have any influence on the determination up to the content of 20 % (v/v), acetonitrile up to content of 70 % (v/v). A linear calibration dependence was measured in the medium of Britton-Robinson buffer pH 12 within the benzophenone-3 concentration range from 1·10-6 mol·L-1 to 1·10-4 mol·L-1 . Detection limit 1.5·10-6 mol·L-1 and determination limit 5.0·10-6 mol·L-1 have been reached. Key words Benzophenone-3 Boron-doped diamond film electrode Differential pulse voltammetry
Determination of Lead Using FIA Technique with Spectrophotometric and Electrochemical Detection
Hála, Petr ; Vyskočil, Vlastimil (advisor) ; Rychlovský, Petr (referee)
The aim of this thesis was the determination of lead in water samples using complexating reaction with 4-(2-pyridylazo)-resorcinol in medium of 2-amino-2- hydroxymethyl-propan-1,3-diol hydrochloride buffer (Tris·HCl). Firstly, for the determination was chosen UV/VIS molecular spectrometry in a static arrangement. Subsequently, the method was performed in flow injection arrangement. The calibration was performed under optimal experimental conditions. The limits of detection for static and flow injection arrangements were 0.097 mol dm-3 and 0.27 mol dm-3 , respectively. Secondly, the determination of lead by differential pulse voltammetry was performed. The electrochemical properties of lead complex were investigated. During these experiments it was found out that small amount of this complex was adsorbed on the surface of silver solid amalgam electrode. The calibration was performed, the limit of detection was 0.020 mol dm-3 . Keywords Lead, 4-(2-pyridylazo)-resorcinol, flow injection analysis, UV/VIS molecular spectrometry, differential pulse voltammetry, silver solid amalgam electrode.
The study of electrochemical reduction of chenodeoxycholic acid at stationary mercury-based electrodes
Patáková, Adéla ; Schwarzová, Karolina (advisor) ; Fischer, Jan (referee)
Chenodeoxycholic acid is the most common representative of bile acids in the human body. This work studies its electrochemical reduction at stationary mercury- based electrodes using the DC voltammetry and differential pulse voltammetry. These were performed on a silver solid amalgam electrode modified by a mercury meniscus (m-AgSAE) and a hanging mercury drop electrode (HMDE). On the scale of pH 4.0 - 12.0 offers CDCA one reduction signal in the area of highly negative potentials around −1400 mV. There is a distinctive change in the behavior of CDCA for buffers of pH lower than 6.0, compared to other pH values. This change is observable on both m-AgSAE and HMDE through the DC voltammetry and DPV methods. This happens due to protonization of carboxyl group on C24. This change is strongest with pH of 4.0. For that reason, CDCA was studied in two environments - a 0.04 mol.l−1 borat buffer (pH 9.1) - methanol (9:1) and in a BR buffer (pH 4.0) - methanol (9:1). In both environments, the lowest detection threshold has been reached through the DC voltammetry method on HMDE. The cyclic voltammetry method was used to study the electrode process. Again, measuring in pH 9.1 and pH 4.0 was done. For pH 9.1, this is a quasireversible process controlled by adsorption of both electrodes studied. For pH 4.0 is...
Voltammetric determination of benzophenone-3 at carbon paste electrode
Molitor, Vít ; Zima, Jiří (advisor) ; Navrátil, Tomáš (referee)
A method for analysing benzophenone-3 on carbon paste electrode was developed. As a solvent a mixture Britton-Robinson buffer and methanol was used. The pH value of 12 was determined as optimal for further measurements. It was also found out that methanol added to the analyte solution did not negatively influence the voltammetric measurement. To decrease the limit of benzophenone-3 determination the accumulation of the analyte in the electrode surface was studied. The accumulation time of 300 seconds and accumulation potential of +400 mV were used as optimal. When measured under optimal coniditions the limit of detection was 6×10-7 M in deionised water and 5,5×10-7 M in drinking water. Real sample was measured using differential pulse voltammetry and spectrophotometry.
Electrochemical Determination of Fomesafen
Maška, Jan ; Barek, Jiří (advisor) ; Fischer, Jan (referee)
The submitted work deals with the application of voltammetric determination of Fomesafen using non-traditional mercury meniscus modified silver solid amalgam electrode on model samples of Fomesafen in real aqueous matrices of drinking and river water. This method of measurement has been developed and optimized in my bachelor thesis, which the diploma thesis is related to. Fomesafen belongs to a group of herbicides used on a mass scale in the late 20th century in the USA and in many countries around the world still used even today. Among its side effects according to the EPA include, among others, potential carcinogenicity to humans and confirmed carcinogenicity to some mammals (such as rats) which led to a legislative regulation on its use in many countries around the world including the USA, the European Union and many others. Silver solid amalgam electrode has been developed with the intention to limit the use of mercury in accordance with new legislation of the European Union and the concept of green analytical chemistry. Despite the low levels of mercury mainly bound in the form of virtually harmless silver amalgam electrode retains very similar electrochemical properties with proven mercury electrodes. As part of the thesis, direct determination of a number of partial extraction of Fomesafen...
Influence of liposomal platinum cytostatics on cancer cells – voltammetric study
Laníková, Petra ; Prášek, Jan (referee) ; Hynek, David (advisor)
Aim of this thesis is voltammetric study influence of liposomal platinum cytostatics on cancer cells. One of the goals is summarize available informations about influence of cisplatine on cancer cells, its encapsulation into liposome and affection of this cytostatic cisplatin encapsulated in liposome on cancer cell lines. In literary recherche is detail description of these issues. Than is there specification of voltammetric methods, which serve to electrochemical detection of cisplatin. Based on literary recherche was chosen the best method for detection and subsequently the method was optimalized and than was applied to measuring itself.
The Use of Chemically Modified Electrodes in Voltammetric Analysis of Nitroaromatic Compounds
Prchal, Vít ; Vyskočil, Vlastimil (advisor) ; Navrátil, Tomáš (referee)
The main objective of this Diploma Thesis is studying the possibility of detection of nitro derivatives of aromatic hydrocarbons by using chemically modified working electrodes in electrochemical analysis. Compounds analyzed in this work were 1-nitronaphthalene and 6- nitrochrysene - these compounds were chosen on previous experience with surface modified working electrodes (the chemical/physical properties of these substances). All the analyses were performed by using differential pulse voltammetry (DPV) on hanging mercury drop electrode (HMDE) in classic three-electrode system. The original premise of chemical modification of electrode surface is the change of its selectivity towards different compounds - meaning the change of the electrochemical response. The modification agent used in this thesis is 1-octanethiol. Its thiol group offers great potential of strong interaction with the metal surface of the mercury electrode. Voltammetric responses of both compounds were recorded in acidic, neutral and basic solutions (pH=2, pH=7, pH=12) including the responses when the electrode surface was modified. Next objective was the optimization of the modification procedure itself (transferring of the mercury drop from one media to another without damaging or tearing it off from the capillary orifice)....
Electrochemical determination of chlortoluron using carbon paste electrode
Houšková, Lucie ; Zima, Jiří (advisor) ; Vyskočil, Vlastimil (referee)
Chlortoluron is a herbicide from the group of substituted ureas and it is used for weed control in production of cereals and poppy. Substituted ureas are widely used but these substances are known for their high mobility in soil, persistence and contamination of underground water. Therefore, the development of analytical methods suitable for residual concentrations determination is necessary. This thesis deals with the determination of chlortoluron using carbon paste electrode (CPE) by the methods of differential pulse voltammetry and high-performance liquid chromatography with electrochemical (HPLC-ED) and spectrophotometric (HPLC-UV) detection. The aim of the work was to find optimal conditions suitable for chlortoluron determination. Further, the possibility of using miniaturized carbon paste electrode (mCPE) and usability of tested methods for determination of chlortoluron in model samples of river water and soil were studied. Concentration dependences in deionized water were measured by the method of DPV in the Britton-Robinson (BR) buffer (pH = 3) and methanol (10 %, v/v). The limit of detection was 3,7∙10-7 mol∙dm-3 in the case of CPE and 8,7∙10-8 mol∙dm-3 in the case of mCPE. Also, concentration dependences were measured using HPLC with mobile phase containing BR buffer (pH = 4) and...
Voltammetric Determination of Genotoxic 2-Nitrofluorene at Screen-Printed Carbon Electrodes
Jelínková, Lenka ; Vyskočil, Vlastimil (advisor) ; Zima, Jiří (referee)
of the Bachelor Thesis Voltammetric behavior of genotoxic 2-nitrofluorene (NF) has been investigated using direct current voltammetry (DCV) and differential pulse voltammetry (DPV) at a screen- printed carbon electrode (SPCE). The optimum conditions have been found for its determination in a concentration range from 1×10−6 to 1×10−5 mol l−1 for DCV technique and from 1×10−7 to 1×10−5 mol l−1 for DPV technique. An optimum medium for DCV at the SPCE was a 0.1 mol l−1 acetate buffer of pH 4.6, an optimum time of stirring of the sample prior to the analysis was 120 s (the attained limit of quantification (LQ) was 8.5×10−6 mol l−1 of NF). For DPV at the SPCE, the optimum medium was an acidic component part of the Britton - Robinson buffer of pH 2.0; the attained LQs were 6.2×10−7 mol l−1 of NF for the concentration range from 1×10−6 to 1×10−5 mol l−1 (at the stirring time of the sample of 120 s) and 2.0×10−7 mol l−1 of NF for the concentration range from 1×10−7 to 1×10−6 mol l−1 (at the stirring time of the sample of 300 s).

National Repository of Grey Literature : 33 records found   beginprevious14 - 23next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.