|
|
The Administrative building
Kovařík, Tomáš ; Pobucká, Slávka (referee) ; Šuhajda, Karel (advisor)
The aim of the thesis is to develop designs of an office building at the level of building permit application. The thesis is divided into three parts. The first part focuses on the architectural and structural designs. The building is situated on the eastern edge of Letovice. It is designed as a three-story detached building with a basement. The roof is flat with multiple hight levels. The floors are connected by stairs and an elevator. The underground level includes utility rooms. The first floor contains a sales area with a showroom, offices, and sanitary facilities for customers and employees. The second floor contains offices and sanitary facilities for employees. The second part includes designs of HVAC, including lighting and rainwater management system. Mechanical ventilation with heat recovery is provided by two ventilation units in utility room. Heating and cooling is provided by two air-water heat pumps. The heat is distributed through floor heating, while cooling is achieved through fan coils. Photovoltaic plant consisting of 35 panels is located on the roof. The third part of the thesis focuses on thermal and cost assessment of two variants of assembly detail of the parapet wall and thermal insulation of the flat roof. I chose the traditional composition because the reverse composition of thermal isolation freezes in winter.
|
|
|
Návrh dřevostavby mateřské školy
Tmejová, Veronika
The diploma thesis deals with the proposal for a wooden kindergarten building. In the theoretical part, the requirements concerning kindergartens and the requirements for the design of a passive house are described. The structural system of the building was chosen to be a solid timber building made of CLT panels. The layout is designed for two classes of children from 3 to 6 years old. The kindergarten building is located on a specific plot and positioned according to the cardinal directions. The drawing documentation is attached to this thesis. The diploma thesis also deals with the fire solution of the designed wooden kindergarten building. In the thesis the fire safety solution of the building is elaborated.
|
|
|
Office building
Rousková, Radka ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The aim of this master's thesis is to design a low-energy office building in Lanškroun. There are three parts, documentation for building permission, a concept of HVAC documentation and multi-criteria assessment in SBToolCZ. The SBToolCZ evaluates of 39 standards, which are divided into four groups – environmental, social criteria, economics and management and location. The proposed building is two-storey, the ground floor is partly below ground level and is designed of reinforced concrete. The first floor is made of CLT panels. The building has a green roof. A green facade will be made on three sides of the ground floor. On the ground floor, there are reception, a meeting room, offices, a technical and storage facilities. On the first floor, there are offices with facilities for employees. Energy for heating and domestic hot water is provided by a condensing gas boiler. Ventilation in the building is provided by an air conditioning unit with heat recovery. There is an underground tank for collecting rainwater that is used for watering the garden and the green facade. The thesis is processed mainly in the software AutoCAD, MS Word, MS Excel and DEKSOFT.
|
|
|
Restaurant chalupa
Pavíčková, Kristina ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The main aim of this master’s thesis is to elaborate the project documentation of a new restaurant Chalupa. Building is situated in area of the local camp on the edge of the town called Mořkov. The building has one above-ground floor and a partial basement. On above-ground floor, there are two main parts: restaurant and kitchen. Then there are also private room and sanitary facilities for both customers and staff. The building is designed as a CLT superstructure and has a gable roof. The vertical loadbearing structures and non-loadbearing walls are designed of CLT panels. The horizontal loadbearing structures are designed of reinforced cast-in-place concrete slab. Heating energy is supplied by pellet boiler. Ventilation is provided by air conditioning unit. Shading is provided by external louvers. In the third pard, I am creating the facility management plan for this building. The project and visualizations were carried out in the Autocad program.
|
|
|
Polička – housing on the edge of the town and landscape
Papcun, Peter ; Lacina, Adam (referee) ; Toman, Radek (advisor)
When I sleep, I am in the most intimate layer possible. When I wake up, I am in bed with my partner with whom I create a layer larger than the previous one. Us and our bed. I share the bathroom with my family, and I meet my friends in the kitchen at breakfast, with whom I share an apartment. I spend my day with neighbours in shared offices located on the ground floor, from which I have a view of the community gardens. In the evening, I will go to a cafe with my former classmates, who live nearby. In the evening I return home, watch a movie in the shared living room, brush my teeth and find myself again in the smallest layer of them all. I'm falling asleep. The housing design follows the idea that a person's life is made up of layers which are interconnected. These are either tangible, such as space, or intangible such as relationships and social contacts. The place in which we live must be adapted to this fact. This proposal is a combination of apartment buildings in cities where every element of the environment is much closer to one another. Additionally, at the same time, the community gardens meet the need for "land ownership’’ which usually fills family houses on the outskirts. Buildings are a combination of community and private housing to give people a choice between more or less privacy. However, features such as a cafe, shared offices, a small shop, or community gardens located on the ground floor are shared spaces. This area is not exclusively based on these buildings, but also on a square that connects them with each other and with the adjacent greenery and small playgrounds.
|
|
|
Wooden house from CLT panels
Šnajdárková, Zuzana ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
This bachelor thesis focuses on design of two-storey wooden house with a basement. The structural system of the house is made from CLT panels- system Novatop. The basement is made of permanent formwork. The facade of a house is insulated with the ETICS system. The facade of the garage forms ventilated facade. The building is roofed by a pitched roof. The roof above the garage is made as a flat extensive green roof. The building is spacious and offers a lot of space for a family of five. The first floor forms the communication part of the house. There is a guest room, bathroom, kitchen with a living room. The living room is connected to an outdoor terrace with a pergola. On the second floor, there are rooms, a bedroom and a special place for reading. In the basement, there is a bolier-room.
|
|
|
Leisure Centre
Kladiva, František ; Struhala, Karel (referee) ; Košíčková, Ivana (advisor)
The subject of this diploma thesis is new building of leisure center, with two storeys and partial basement, near town Proseč (cadastral area Paseky u Proseče). There is catering and sanitary facilities downstairs and accomodation facility upstairs. In basement, there is storeroom for camping equipment. Next to the building is a plot of land used as a campground. The construction is largely designed as a diffusely open timber - cross-laminated timber walls, ceilings and roof, with thermal insulation. Underground part is made of concrete-filled blocks, with ceilings from pre-tensioned panels. The building is covered with a sadle roof with a sheet metal roofing. AutoCAD software was used to draw the drawing documentation.
|
|
|
Cathedral today
Král, David ; Mléčka, Jan (referee) ; Štěpán, Marek (advisor)
Theme of the thesis is a construction that is considered to be one of the most spectacular examples of a French gothic architecture. Notre-Dame Cathedral lies on the Eastern half of a Parisian island Île de la Cité on the river Seina. On April 15, 2019, roof of the cathedral caught on fire. It was completely destroyed, including its pinnacle. The thesis offers a solution how to restore the roof and what opportunities the new design brings. Aim of the proposal is enrichment of the Notre-Dame community through offering a new refuge, which will be for both, internal growth and spiritual practice itself. The design provides spaces that capture the path to God in them. I perceive the very path to God as a thorough inner work. That is why I am placing 36 contemplation booths in there, in addition to other 8 cabins. The light is removed from those, in order to extend the perception of consciousness. Spaces for individuals will be amended by 3 chapels for a group practice. Each chapel has its typical content - joint contemplation chapel, chapel that worships the Jesus Christ’s crown of thorns and a community chapel with a variable arrangement.
|
|
|
Wooden Family House
Kráčalíková, Anna ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
This bachelor thesis deals with design of wooden house for family of four people. The house has the basement partly above ground level with parking lots for two cars, ground floor and an attic rooms for family members. Basement floor is made of BEST brand concrete blocks and permanent formwork. Above ground floor, both floors are made as a timber structure, constructed from CLT panels produced by NOVATOP company. On the top of the house is the gabled roof that is matching and fitting the neighbourhood. Object is shielded by timber cladding together with fiber-cemented boards, that create an ventilated facade.
|
|
|
Wooden family house on a slope
Svačinová, Martina ; Šuhajdová, Eva (referee) ; Šuhajda, Karel (advisor)
Bachelor thesis deals with design of a wooden family house in the hillside. The house is a two-storey building with “L-shaped” floor plan, covered by the gabled roof. The house is designed for four-member family. The residential part is in the first floor. In the lower part, technical rooms are situated including a garage for two cars. Combination of two building systems was used in the design. The basement is built of concrete bricks by KB-BLOK. On top of lower part, a wooden structure is constructed, made of CLT panels produced by NOVATOP company. The advantage of this system is the construction speed. Resulting design is a modern building fitting in the neighbourhood.
|
guest ::
