|
|
Design of a one-span bridge
Barič, Dominik ; Panáček, Josef (referee) ; Nečas, Radim (advisor)
The subject of this bachelor’s thesis is a design of a plate – girder bridge structure over the river „Svitava“, between the towns of „Blansko“ and „Brno“. The bridge carries a road of a class II, category S9,5/90. Three studies have been designed. Study A has been chosen for a detailed design. It has a character of post - tensioned plate - girder structure. Load analysis is performed in software Scia Engineer 17.1. The design and assessment are done by hand. Load caused by wind, snow and horizontal forces of traffic is passed by.
|
|
|
Reinfoced concrete slab bridge
Liška, Jaroslav ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
The thesis is mainly concerned with a project (plan) of new reinforced concrete bridge about one span over the river. The function of bridge is crossing the 2nd class road, category S 7,5/50 and also crossing a footpath. In the work was considered three methods for the design of reinforced concrete bridge. The most convenient option was chosen and described in full detail. Selected model of superstructure was designed as trapezoidal slab with full section in span 11,350 m. Calculation of internal forces were conducted by software Scia Engineer 17.1 and compared with manuall computation. The superstructure of the bridge considers both ultimate and serviceability limit state. Dimension and assesment of the framework is made by Eurocodes.
|
|
|
Slab bridge in Velké Pavlovice
Gřunděl, Michal ; Hofírek, Radovan (referee) ; Koláček, Jan (advisor)
Bachelor thesis deals with the design of the new bridge according to EN 1992-1-1. The bridge is used to convert local road across the river Trmánka. The bridge is designed as a plate with a full cross-section of the trapezium, a statically resolved as a bridge is just stored with the length of bridge 12, 1 m. Categories of communication is S 7.5. Encumbered and assessment on the MSÚ and MSP is resolved according to the standards.
|
|
|
Slab bridge over the Krupá river
Hlavoň, Michal ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
Bachelor thesis deals with the design of the new bridge according to EN 1992-1-1. The bridge is used to convert local road across the river Krupá. The bridge is designed as a plate with a full cross-section of the trapezium. Statically resolved as a bridge to support the storage of bridging length 12.2 m. Categories of communication is S7.5. Encumbered and assessment on the rezistance limit state and serviceability limit state is resolved according to the standards.
|
|
|
Highway bridge across a railway
Mičánek, Ondřej ; Rušar, Jaromír (referee) ; Nečas, Radim (advisor)
The topic of this thesis is design and evaluation of the bridge structure. Three variants of bridging were created, among which the variant with prestressed girder deck and seven spans was chosen to detail processing. The bridge construction is built on sliding steel girder in several stages. Construction is evaluated considering the ultimate serviceability state and ultimate limit state. Emphasis is also on evaluation of construction stages. The calculation of load effects and analysis of building in stages was done in Scia Engineer 19.1 software. Design and evaluation were done according to currently valid European standards.
|
|
|
Prestressed bridge on the expressway
Juřenčáková, Jana ; Zlatuška, Karel (referee) ; Koláček, Jan (advisor)
The purpose of the diploma thesis is to design a expressway bridge over the river Vsetínská Bečva. The bridge is located between Valašské Meziříčí and Vsetín. Separate superstructures are designed for each directions of the expressway. The right superstructure, which is wider, is considered for detailed design. Two variants were proposed, A double T beam superstructure and a box girder superstructure. The three span box girder superstructure was chosen for the design. Spans are 48+65+48 m long. Two options of construction process of the superstructure were proposed. This bridge is designed according to the limit states, the influence of construction process is considered. Structural models of construction were made as a finite element model and a plate model. Structural analysis, drawings and visualization were developed.
|
|
|
Reinfoced concrete slab bridge
Liška, Jaroslav ; Panáček, Josef (referee) ; Koláček, Jan (advisor)
The thesis is mainly concerned with a project (plan) of new reinforced concrete bridge about one span over the river. The function of bridge is crossing the 2nd class road, category S 7,5/50 and also crossing a footpath. In the work was considered three methods for the design of reinforced concrete bridge. The most convenient option was chosen and described in full detail. Selected model of superstructure was designed as trapezoidal slab with full section in span 11,350 m. Calculation of internal forces were conducted by software Scia Engineer 17.1 and compared with manuall computation. The superstructure of the bridge considers both ultimate and serviceability limit state. Dimension and assesment of the framework is made by Eurocodes.
|
|
|
Design of a one-span bridge
Barič, Dominik ; Panáček, Josef (referee) ; Nečas, Radim (advisor)
The subject of this bachelor’s thesis is a design of a plate – girder bridge structure over the river „Svitava“, between the towns of „Blansko“ and „Brno“. The bridge carries a road of a class II, category S9,5/90. Three studies have been designed. Study A has been chosen for a detailed design. It has a character of post - tensioned plate - girder structure. Load analysis is performed in software Scia Engineer 17.1. The design and assessment are done by hand. Load caused by wind, snow and horizontal forces of traffic is passed by.
|
|
|
Bridge over the Krupá river
Crha, Tomáš ; Zlatuška, Karel (referee) ; Koláček, Jan (advisor)
The aim of this bachelor thesis is design of bridge construction over the river Krupá in the city Staré Město. The load bearing system is composed of one trapezoidal span. Internal forces are calculated by SCIA Engineer 17.1. All calculations were performed according to actual standard ČSN EN 1992-1-1.
|
|
|
Bridge on a highway
Knotek, Jan ; Nečas, Radim (referee) ; Panáček, Josef (advisor)
Subject of this bachelor’s thesis is design of new slab bridge construction over the II/464 road between the villages Příbor and Bílovec. The bridge converts highway D47. Thesis includes three studies. Pre-stressed rectangular cross-section slab with elliptical exterior trim, pre-stressed plate- grinder construction and construction of prefabricated beams and monolithic slab. For next assessment was chosen option no.1. Load effects calculation is solved in SCIA engineer 16.1. Design and assessment of the structure are made according to valid standards and regulations.
|
guest ::
