|
|
Design and Realization of Acoustic Treatment of Small Recording Studio
Tkadlec, Vojtěch ; Husník, Libor (referee) ; Schimmel, Jiří (advisor)
This bachelor thesis deals with the topic of acoustic properties of an enclosed space, their detection and modification. The thesis examines the acoustic properties of a small enclosed space, which were determined by simulation using a virtual 3D model and subsequently verified by measurement. After finding out the properties, a substantial part was also devoted to their modification, where the task was to design the acoustic elements so that the resulting length of the reverberation time corresponds to the optimal values for a small recording studio. The design of the elements is followed by their construction, followed by a re-measurement of the space. Furthermore, the work summarizes the principles of modeling and simulation of 3D models.
|
|
| |
|
|
Spectral analysis of sound in spatial acoustics
Křenek, Jakub ; Čížek, Martin (referee) ; Rozman, Jiří (advisor)
This thesis is focused on the basics concepts of room acoustics and used sound level meters. The first part focuses on the spatial acoustics and acoustic quantities used in it. Next part of thesis describe the structure and features of sound level meters. Following chapters are concerned on the PULSE system architecture and data analysis. PULSE platform contributes multi-spectral analyzer type 3560B PULSE, programming environment LabShop and microphones for difuse and free fields. The practical part describes the installation, setup and the measurement of reverberation time in the Labshop environment.
|
|
|
Spectral analysis of sound in spatial acoustics
Křenek, Jakub ; Čížek, Martin (referee) ; Rozman, Jiří (advisor)
This thesis is focused on the basics concepts of room acoustics and used sound level meters. The first part focuses on the spatial acoustics and acoustic quantities used in it. Next part of thesis describe the structure and features of sound level meters. Following chapters are concerned on the PULSE system architecture and data analysis. PULSE platform contributes multi-spectral analyzer type 3560B PULSE, programming environment LabShop and microphones for difuse and free fields. The practical part describes the installation, setup and the measurement of reverberation time in the Labshop environment.
|
|
|
Spectral analyse of sound in space acoustics
Port, Martin ; Bereznanin, Martin (referee) ; Rozman, Jiří (advisor)
This thesis is an introduction to the problems of acoustics and is focused on the variables describing the noise. The methodology for measuring noise in relation with valid hygiene standards is analyzed in next section. The noise levels at work required by government regulation no. 148/2006 are summarized in a subsequent charter. The next section is an introduction to the analyzer PULSE 3560B from Brüel & Kjar. This work describes a software called Labshop, which is designed to analyze noise and vibrations. It also describes the most common features Acoustilyzer NTI AL1. The practical part was to measure the reverberation, noise, frequency spectrum and plott the distribution of noise with noise maps of various auditoriums.
|
|
|
Design and Realization of Modification of Acoustic Field in Laboratory
Ješko, Petr ; Rášo, Ondřej (referee) ; Schimmel, Jiří (advisor)
The thesis deals with the problems of closed spaces. It deals with situations where it is necessary to reduce the reverberation time in certain octave bands. It provides procedures comparing conventional method of solving by calculation of the mean sound absorption coefficient of the area and the subsequent experimental addition of acoustic absorbers which occupy different areas and method that uses an acoustic simulation software for the 3D model. It also deals with a concept of Reflection Phase Grating diffuser.
|
guest ::
