|
|
Analysis of the influence of temperature cycles on the elimination of recast layer on materials used in aerospace
Slavíková, Barbora ; Martin,, Grepl (referee) ; Horník, Vít (advisor)
This bachelor thesis is dealing with the analysis of the influence of temperature cycles on the elimination of recast layer on materials used in aerospace. This thesis was created in cooperation with Honeywell Aerospace Company in Olomouc. The aim of this work was to prepare the study about influence of the brazing heat cycle on recast layer removing which was caused by laser cutting process. In first part of this bachelor thesis the unconventional machining methods, materials and related brazing processes used in Honeywell Aerospace Olomouc were described. Second part of the thesis consists of experimental measurement of the recast layer provided on a test specimens including their evaluation and interpretation of the results. The conclusions of this bachelor thesis will be used as future reference for next technological research in Honeywell Aerospace Company in Olomouc.
|
|
| |
|
|
Comparative Study of Enviromental Aspects of Different Non-conventional Cutting Technologies.
Muzikant, Dušan ; Dvořák, Jaromír (referee) ; Slaný, Martin (advisor)
This thesis deals with possible impact of non-conventional cutting technologies on enviroment and human body. In the first part of this thesis are described characteristics and working principle of particular methods. In the second part there are detail solved enviromental aspects of four methods whit focus on the filtration machine systems or recycling of used materials, through which was the sample produced. During the production there were watched avalible parameters, which served for final compare of basic enviromental aspects of these four methods.
|
|
|
Draft of production of creative designe lamp by unconventional methods
Mecová, Kamila ; Sliwková, Petra (referee) ; Dvořák, Jaromír (advisor)
This thesis aims to present a design and production of a decorative body of a lamp made by using unconventional technologies. The work is divided into several parts. The first part presents the individual methods of producing the decorative body design in details; these methods are then compared. The following part deals with a 3D model design and its gradual modifications which had to be implemented due to feasibility of the lamp assembly. The final part of the work is dedicated to an experimental production of the decorative body. As a result, the produced parts are assessed in terms of cutting roughness, production time, and pricing. The output of this work is two lamps; a table lamp and a pendant lamp, both of which include a decorative body which is cut using unconventional methods, namely by a laser or a water jet.
|
|
|
Ultrasonic machining technology
Krajči, Jakub ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
The main aim is of the thesis is to provide information about ultrasonic machining, to introduce ultrasound and its physical properties, to describe ultrasonic machining methods and to show the non-destructive use of ultrasound. Furthermore I will hold a discussion about this topic and make a quick summary.
|
|
| |
|
|
Technology of wire electrodischarge
Tichý, Štěpán ; Mouralová, Kateřina (referee) ; Osička, Karel (advisor)
This master’s thesis deals with technology of wire electrical discharge machining in theoretical and practical level. Theoretical part of the thesis explains in detail the principle of electrical discharge machining, describes functional parts and settings of a current wire EDM machines and also the possibility of using method for production of specific parts. Practical part of the thesis solves manufacturing of gearing on pinion manufactured by wire cutter EXCETEK V650 and statistically evaluates precision parameters on surfaces of the carriers taken by specific technological conditions with the same machine.
|
|
|
Design and manufacturing of an engraving LED laser
Hlaváček, Petr ; Kalivoda, Milan (referee) ; Dvořák, Jaromír (advisor)
The bachelor's thesis is divided in two main topics. In first one it characterizes what unconventional machining methods are and divides them into groups according to the material removal effect. Each method is always simply and briefly explained. The purpose of this part is to introduce the unconventional technologies and their use in mechanical engineering. Second major topic follows comparison between beam methods and is dealing with the design and construction of a laser engraver. The goal is to build a prototype that allows not only engraving but also cutting into materials such as cardboard. The primary purpose of this machine is the production of kits for model railroad. The last chapters are about economic evaluation and comparison between made prototype and commercially sold engraver.
|
|
|
Nekonvenční metody obrábění materiálu
LARVA, Jaroslav
The bachelor thesis deals with the summary and characteristics of unconventional machining methods used in mechanical engineering for the agricultural or automotive industry, such as chemical, electrochemical machining, electroerosive machining, ultrasonic machining, laser machining or electro beam machining. The first part includes a systematic division and characteristics of individual methods. For each method, the history, machining principle, machining equipment, advantages and typical area of application of individual unconventional technologies in technical practice are described. The final chapter contains a comparison of individual methods depending on the achieved surface quality and dimensional tolerance.
|
|
|
Design of Technology for Cutting and Engraving of Rotary Semi-finished Products for the CO2 Laser
Šrenk, Vojtěch ; Dvořák, Jaromír (referee) ; Slaný, Martin (advisor)
The thesis deals with the design and implementation of a rotary axis in a CO2 laser cutter for the ability to cut and engrave rotary workpieces. The thesis is focused on identifying several similar available known competitive solutions, for which the pros and cons were evaluated. Based on the findings, suitable parameters were selected to achieve maximum versatility of the proposed system. Versatility in this respect is related to the ability to cut and engrave the widest possible range of rotary workpieces. The thesis also describes the design solution, axis assembly procedure, production design and production of individual components using 3D printing technology (FFF), selection of suitable standardized components and the actual implementation. The conclusions then focus on the proposed solution from an economic and technical point of view.
|
guest ::
