|
|
Multifunctional house in Karlovy Vary
Růžička, Jiří ; Vlček, Ing Karel (referee) ; Vlček, Milan (advisor)
The project solves a multifunctional Duma building in a vacant lot, contemplated the construction site is located in Carlsbad, in the street Vyhlíce. This is a protected site spa. Part of the project's layout and structural design of the house. It is a six-storey house with an attic and a basement floor. It is designed as a free-standing in the gap as the final house. The layout is divided into two complete units with their own input. There are spaces for business and residential units for permanent housing. Part of the living area are also room house equipment. Inputs to both parts are wheelchair accessible. The house is not wheelchair The house is designed as a brick building of brick masonry Porotherm the module dimensions of 250 (125) mm with reinforced concrete ceilings. Roofed by a hipped roof. The house is located on a private plot of 519 m2 built-up area of 221 m2. The land is gently sloping. The main orientation of the building to the cardinal's east and west. The south wall is adjacent to the neighboring house.
|
|
| |
|
|
Construction technology stage of the perimeter shell of the elementary school in Slažany
Kozla, Dávid ; Nečasová, Barbora (referee) ; Diaz, Yvetta (advisor)
This bachelor thesis solves the building-technological phase of the perimeter shell of the elementary school in Slažany. Specifically, it deals with the cladding of the wooden superstructure of the 3rd floor of the primary school building and the additional insulation of the existing floors. The shell of the superstructure is covered with a wooden cladding and filled with mineral wool insulation. Additional insulation is designed as a contact from facade polystyrene boards. The work is elaborated technical report, thermal assessment of cladding, technological procedures at given stage, transport solution including design of the machine assembly and situation, budget stage with report statement, principles of organization of construction including technical report and drawing of construction site, control and test plan, time schedule and safety.
|
|
|
Study of the effect of moisture load on the mechanical properties of mineral wool over time
Ježek, Jiří ; Novák, Vítězslav (referee) ; Zach, Jiří (advisor)
The work deals with the problem of mineral wool degradation due to thermal and moisture load. Specifically, the effect on mechanical properties is studied. The theoretical part generally explains the theory of heat transfer, discusses different groups of thermal insulation materials. Furthermore, the theoretical part deals with mineral wool insulation, describing the production process of this material, the input raw materials and the possibility of recycling of mineral fibres in mineral wool production. In the last chapter, the theoretical part deals with the types of loads on thermal insulation in building construction. The practical part deals with the design of a methodology for the determination of mechanical properties due to thermal and moisture loading. Subsequently, the established methodology was verified.
|
|
|
Environmentally Advanced Library
Burýšková, Jana ; Vyhlídalová, Karolína (referee) ; Horák, Petr (advisor)
The main aim of the Master‘s project is to design a library and a cafe in Příbram. The project is divided into three parts. The first part deals with architectural and structural design. The second with technical building services and the third with thermal imaging. The building has a basement and two above-ground floors. The building is founded on foundation strips. The building is designed with load-bearing brick walls and pre-stressed slabs Spiroll. The roof is a flat intensive green roof. The building envelope is insulated with mineral wool. In the building there is air a conditioning and a cooling system. As a heat source, a pressure-independent heat exchanger unit connected to the local hot water pipe will be used. A part of the electricity consumption is covered by photovoltaics. In the third part there are images from a thermal camera for some libraries. Imagines were evaluated if there are thermal bridges in the measured libraries. The project was carried out in the AutoCAD programme.
|
|
|
Multipurpose Educational Centre
Drahokoupilová, Barbora ; Vystrčil, Jan (referee) ; Košíčková, Ivana (advisor)
The objective of my diploma thesis is to design multipurpose educational centre. The project consists of three parts. The aim of the first one is to create the architectural and structural design. The building is mainly centred around four common rooms accompanied by a simple kitchen and basic amenities. It is a two-storey building with a green roof. Its floor area is 327 m2. The vertical load-bearing structures are masonry, specifically made of aerated concrete blocks. The horizontal load-bearing structures are designed as cast-in-place reinforced concrete slabs. Envelope walls are insulated with mineral wool because of its elliptical floor plan. The foundation is cast-in-situ concrete slab. The second part focuses on a building services design. Domestic hot water and heating is provided by a gas boiler and electricity is partly supplied by a photovoltaic system. The building has mechanical ventilation with heat recovery. There is an underground tank for collecting rainwater that is used for watering the garden. The third part relates to facility management. It focuses on facility operations and core and non-core activities.
|
|
|
Home for seniors
Koláříková, Eliška ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The aim of the master´s thesis is to design a Residential care home as smart building. It is situated in the centre of Křenovice near Brno. The master´s thesis is divided into three parts, first part presents design documentation, second part is focused on building services and the final part presents noise control in building. Residential care house is designed as two-storey building without basement with flat roof. On the first floor there is utility area for senior house and healthcare facility and on the second floor there are flats for seniors. Residential care house is built on footing. Load-bearing and non-load-bearing walls are designed from hollow bricks type THERM. External walls are insulated with mineral wool. The roofing of residential care house is made up of extensive green roof. The building services of the building includes two ground-water heat pumps with boreholes for heating and cooling, photovoltaic panels, HVAC, hot water cylinder and rainwater storage tank. The final part is focused on noise control in building. It is about acoustic in construction. Noise study is also included.
|
|
|
Senior centre in Ždár nad Sázavou
Brukner, Josef ; Kalánek, Jiří (referee) ; Ostrý, Milan (advisor)
The aim of this master thesis is to design home for the residential care of elderly and disabled people in Žďár nad Sázavou. It is designed as a three-storey building with a basement. There are technical facilities, in the basement. Canteen, doctor´s office, manager‘s office and reception are located on the first floor. Second and third floor contains common premises and residential units.building has a prefabricated reinforced concrete structural framework with mineral wool thermal insulation. It is covered with an extensive green roof. Piles are designed as the foundation. Partition wall is designed from plasterboard. The project and 3D rendering were carried out in Revit and Lumion software. All structures comply with the valid standards and regulations. The building site contains also an outdoor car park and a park.
|
|
|
Study of reaction to fire tests for thermal insulating materials
Krivda, Antonín ; Novák, Vítězslav (referee) ; Sedlmajer, Martin (advisor)
This bachelor thesis deals with thermal insulation, it is fire resistance and reactions to fire. The thesis also approaches the testing of thermal insulation materials. In detail, it focuses on the Small flame test, Calorific value determination and the Flameproof test. The test methods were performed on insulators based on polystyrene and mineral wool. The literary research focuses on the fire safety of buildings that have been already insulated.
|
|
|
Hotel "U Prehrady"
Černý, Dávid ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The subject of this diploma thesis was to process the study and the design documentation for a newly built hotel in Brno, in city district “Kníničky” near the artificial dam “Přehrada” in a rest area. The hotel will serve as temporary accommodation for up to 64 hotel guests in single, double and four bed rooms. The object also contains training rooms, offices, a meeting room, a café, a small grocery store and a restaurant with kitchen. Parking is possible in one of the two mass garages and there is an outdoor parking possibility in front of the hotel too. The building has a cast-in-place concrete frame with longitudinal beams and sway bracings. The external wall consists of aerated concrete bricks with contact thermal insulation system ETICS (insulation material mineral wool), the ceilings will be cast-in-place reinforced concrete ceilings and the roof flat green roof or flat roof with gravel on it above the 5th floor. The foundation construction consists of reinforced concrete foundation strips, which expand to foundation pads under the load-bearing columns and will be supported by piled foundations under the most exposed elements. As long as the hotel is situated into a fairly steep slope, the vertical alignment of some building parts is various so part of the project is the design of landscaping works. Design documentation was processed using the program AutoCAD 2017, the study and the visualization using both SketchUp 2015, LayOut 2015 and Lumion 5.
|
guest ::
