|
|
Senior cohousing
Výtisková, Jana ; Pobořil, Lukáš (referee) ; Petříček, Tomáš (advisor)
Senior cohousing is situated in the Moravian-Silesian Region in city Orlová and it is designed as complex. It is a new form of living for seniors in the Czech Republic. The loose translation could be „close neighbourly living for senior people. “ Access road to the complex is from Tešínská Street and then down the main road from the southeast on the car park. Near the car park there are three main buildings. Building A is the main common building for seniors’ meetings. Building B has a private doctor and a small gym. Building C is designed as technical premises. There are four types of family houses for seniors. Family house type 1 - in the complex 3x is suitable for two seniors. Family house type 2 - in the complex 2x is suitable for two seniors with moving difficulties. Family house type 3 - in the complex 3x is designed as semi-detached house for two senior couples. Family houses accommodate 30 seniors in 15 housing units. All the objects are brick, single-storey without cellar built up from HELUZ system with footings from plain concrete with foundation slab, flat roofs, contact insulation of perimeter walls, partly wood tiling. What is more, in senior cohousing there are senior playground, orchard park, lake, road inside the complex, pavements and paths.
|
|
|
Kindergarten
Frieb, Vilém ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The aim of this master project is to design a nearly zero-energy building of kindergarten. The kindergarten is designed as one storey building with capacity of 40 children split into two playrooms. Playrooms are separated and each of them has own sanitary facilities and locker room. Playrooms have large windows with external blinds on the south to provide solar gains. There is horizontal sun breaker above the windows which prevent overheating in summer. Load bearing walls are made of sand lime blocks. Walls are insulated with mineral wool board. Roof ceiling is made of prestressed concrete slabs. The building has a flat extensive green roof. The second task of the project includes design of lighting, rainwater harvesting, HVAC, source of heat and photovoltaic system. The third part is theoretical and includes searching for an ideal source of energy for the building. There are two types of heating compared such as gas boiler and a groundwater heating pump. The main software used for the project is Revit.
|
|
|
New building for habitation
Pechal, Radek ; Janíček, Vít (referee) ; Benešová, Romana (advisor)
This thesis is processing design of new building of detached house situated at Zlín - Kudlov. It is single-storey building with one residental unit for 4 persons. The building is designed of individual sandwich system and it's roof design is that of flat with growing layer. Project documentation is elaborated in accordance with currently valid laws, regulations and standards.
|
|
|
Kindergarten
Krištofiaková, Nikola ; Procházka, Martin (referee) ; Sobotka, Jindřich (advisor)
The matter of the bachelor´s thesis is the new building of single-storey kindergarden in the city of Litovel. The object is formed by lenghtwise brick supporting systém. Ceiling structure ,which is supporting structure of flat roof as well, is formed by prestressed ceiling panels Spiroll. The roof is flat, green. The object contains one department of the kindergarten for 24 children maximum. The main living room for children is oriented to the southern side.
|
|
|
Autosalon
Bajer, Radim ; Manová, Ludmila (referee) ; Maceková, Věra (advisor)
This master thesis is focused on elaboration of project documentation for constructing autosalon in Žďár nad Sázavou. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #6167/2. Both plat sis parts of cadastral area of Žďár nad Sázavou. There are all needed engineering netwoeks nearby. Object is divided on two functional parts, which are operationally and constructionally connected. First part is exhibition and representatice hall, which are capacity of 7 exhibited vehicles. Other partis formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Second part is service for personal and light commercial vehicles with four working stations. Construction is designed reinforced concrete columnar structural system. Plan dimension autosalon is 31,06x22,6m. Plan dimension autoservise is 30,74x18,84m. The cladding autosalon is designed of ceramic tile 250mm. The cladding autoservis is designed of sandwich panel. Roof of building accross the surface is flat roof. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hal lis more than 50% glazed. Parts of autosalon and autoservise are designed as sigle storey objects, while administrative part is designed as a two.
|
|
|
Kindergarten
Svobodová, Simona ; Řezníček, Petr (referee) ; Hradil, Dušan (advisor)
The topic of my diploma project considers a new building for a kindergarten in the city quarter Brno-Bystrc. The building lot where is the kindergarten located is rectangular in shape and is genty sloping. The building consists of a groundfloor only, without a basement and is solved as barrier-free. The kindergarten has 2 classrooms with the overal capacity of 50 children. On the west side of the plot is considered a parking lot for 13 cars, from here there is a sidewalk reaching the main gate and further the main entrance of the building. The structural wooden system use wooden wall panels NOVATOP. The foundation slab from reinforced concrete is layed on a glass foam granulate. The roof is designed as a green flat roof. The building has an atypical layout. The central part is raised and has a hexagonal contour, in its center is located a glazed atrium. On two sides of the hexagon are symmetrically located two more wings, which has a nearly rectangular shape. In front of the building is located a playground, faced to the south.
|
|
|
Motorshow
Bár, Radek ; Vémola, Josef (referee) ; Utíkalová, Ivana (advisor)
This master thesis is focused on elaboration of project documentation for constructing autosalon in Kopřivnice. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #419/2 and partly on plat #419/27. Both plats are parts of cadastral area of Kopřivnice. There are all needed engineering networks nearby. Object is divided on three functional parts, which are operationally and constructionally connected. First part is exhibition and representative hall, with capacity of 11 exhibited vehicles. Second part is formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Third part is service for personal and light commercial vehicles with three working stations. Construction is designed partially reinforced concrete columnar structural system and partially of brick longitudinal structural system. The biggest plan dimension of building is 34.3x35.15m. The cladding is designed of sandwich blocks LIVETHERM tl.400mm. Roof of building accross the surface is flat roof with several height levels. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hall is more than 50% glazed. Parts of service and autosalon are designed as sigle storey objects, while administrative part is designed as a two.
|
|
|
Kindergarten Bumblebee
Odehnalová, Marie ; Karásek, Petr (referee) ; Müller, Jan (advisor)
The subject of this bachelor thesis is the design of a new kindergarten building and the elaboration of the documentation for the construction. The building is situated in the western part of the village of Vlkov u Osové Bítýšky. The building is set in a slightly sloping terrain. The building is designed as a single-storey building. The building is cha-racterized by two wings of an arched shape and an elevated central part supplemented with sacral lighting through circular openings and a glazed front facade. The building contains two kindergarten classrooms with a capacity of 20 children with operational facilities and its own kitchen, the school's administrative operation and technical facilities of the building. Each classroom has separate cloakrooms, washroom, isolation room, playroom and entran-ce to the terrace which also serves as an additional emergency exit. The building is designed to a low-energy standard, as a near-zero heat building (nZEB). The building is designed for use by people with reduced mobility. The structural design is a masonry wall building with ETICS contact insulation forming the central part of the building. The ceiling structure is designed as a broken reinforced concrete slab connec-ted to monolithic walls within the elevated part of the building. The foundation is solved by foun-dation strips under the perimeter walls - the walls are supplemented with necks made of concrete blocks of lost formwork. The roofing is designed as a single-skin flat roof with a layer of extensive greenery. Adjacent to the brick building are wooden buildings forming the kindergarten classrooms. These are structurally designed as fan-arranged frames of glued laminated timber, wrapped in a lightweight envelope with a ventilated façade. The columns are founded on plain concrete footings, with a slab of underlying concrete to be extended in place of the lightweight envelope. Above the classrooms, there is a pitched single-skin roof with a slope sloping down towards the central part of the building.
|
|
|
Kindergarten
Frieb, Vilém ; Struhala, Karel (referee) ; Jelínek, Petr (advisor)
The aim of this master project is to design a nearly zero-energy building of kindergarten. The kindergarten is designed as one storey building with capacity of 40 children split into two playrooms. Playrooms are separated and each of them has own sanitary facilities and locker room. Playrooms have large windows with external blinds on the south to provide solar gains. There is horizontal sun breaker above the windows which prevent overheating in summer. Load bearing walls are made of sand lime blocks. Walls are insulated with mineral wool board. Roof ceiling is made of prestressed concrete slabs. The building has a flat extensive green roof. The second task of the project includes design of lighting, rainwater harvesting, HVAC, source of heat and photovoltaic system. The third part is theoretical and includes searching for an ideal source of energy for the building. There are two types of heating compared such as gas boiler and a groundwater heating pump. The main software used for the project is Revit.
|
|
|
Revitalization of a multi-purpose building in the village
Federla, Jakub ; Nováková, Eva (referee) ; Kolář, Radim (advisor)
The aim of master‘s thesis is to renovate old agricultural building and design it as nzeb building. The thesis contains three parts: 1st – design of the building, 2nd – design of building services, and 3rd – assessment of the impact of different operations in building on energy consumption. The results are then evaluated for economic and environmental savings. The renovated building in village Rozkoš will be used for many purposes. It will be divided into 3 parts – a multifunctional hall, a pub, and a club room. Multifunctional hall will be used for various activities for village itself or public. In the pub will be only cold kitchen with small dishes and beverages. Club room can be used for elderly people, workout or young people. The building is low rise and structural system is combined. The vertical load-bearing walls and columns are built of bricks. Horizontal load-bearing structures are cross vaults made also of bricks. Saddle roof is made of timber roof truss. The building site contains also an outdoor car park and a garden. The project was carried out in the Revit.
|
guest ::
