|
|
Remote Control for Home Automation
Polgár, Václav ; Kočí, Radek (referee) ; Hanáček, Petr (advisor)
This bachelor's thesis deals with design and implementation of system for remote control of home appliances. The resulting control system involves the simple application that uses Bluetooth wireless technology to communicate with hardware components which can operate the appliances working on the infra principle.
|
|
|
Image processing algorithms in eight-bit microcontroller
Rébl, Miroslav ; Fajmon, Petr (referee) ; Fedra, Zbyněk (advisor)
The aim of master thesis was to investigate a simple camera and processor Atmel AVR unit implementation. Thesis describes how to get image from C3088 module and management over the bank of camera registers. Work includes limitation draft for this way of processing the information. Thesis also solves an exemplary model for object recognition using this implementation.
|
|
|
Communication module for power supplies controlling
Zachar, Jiří ; Šmíd, Petr (referee) ; Dřínovský, Jiří (advisor)
The aim of this work is to design a communication module for laboratory source Manson. This power supply communicates only through a serial RS-232 link. Modern computers usually use for the connection with other peripherals mainly USB. Designed communication module contains converter between the RS-232 and USB. Power supply is used in the automated measurement setup, which is controlled from the Virtual Engineering Environment from the Agilent Technologies. Direct commands for laboratory source Manson are not compatible with the SCPI (Standard Commands for Programmable Instruments) standard commands. So, the communication module converts commands from the SCPI format to Manson supply instructions. The communication with the Manson supply will be obvious for students by using new communication module.
|
|
|
Design of Robot end effector with automatic tool exchange
Jirges, Radek ; Chalupa, Jan (referee) ; Krejčí, Petr (advisor)
The goal of this thesis was to design an end effector for a small robot for testing of devices with a touchscreen. The effector has to communicate with the robot via serial interface and provide feedback about used downforce. Another requirement was possibility of automatic tool change. Measuring of downforce, signal processing, and communication with robot ensures custom electronics based on STM32 microprocessor and piezoresistive sensor. The mechanism of tool change was inspired by the system used with industrial robots but customized for this application. The result of this thesis is a functional prototype of a stylus for devices with a touchscreen which provides feedback about the downforce on display and possibility of automatic tool change. The main benefit of this solution is the possibility of changing the tool for the one with one or more styluses for testing gesture-based interface what is indispensable in these days.
|
|
|
Computer simulator for education
Friml, Dominik ; Macho, Tomáš (referee) ; Petyovský, Petr (advisor)
This bachelor thesis is divided into several parts. The first part consists of an introduction to individual parts of a processor and some of its peripheries. Next part of thesis is a research of existing educational and demonstrative tools usable in education. Results of the research were compiled into requirements for educational system. Using those requirements, and design of an architecture for educational processor for education, not only on FEEC BUT was created. As a next step, there is described a procedure, that led to a creation of a working simulator of the designed processor. Last part of this thesis is a design of several educational exercises, that demonstrates principles of computers and programming in a machine code and an assembly language.
|
|
|
Microcontroler based ECG Generator
Bureš, Michal ; Bubník, Karel (referee) ; Sekora, Jiří (advisor)
This thesis deals with the generation of an ECG signal and options how to generate a physiological or a pathological signal using the microprocessor. On the basis of the studied methods for generating signal was used the graphic method, using the table values to describe the an individual waves contained in the ECG signal. Bacherol’s thesis solves a design of the individual parts that are needed to realization the genererator. These parts are a block diagram, a system design and a flowchart. On the basis of a design is constructed and programmed function ECG signal generator.
|
|
|
Meteorological Station with Remote Access
Svoboda, Josef ; Číž, Radim (referee) ; Sysel, Petr (advisor)
This thesis discusses design and realization of air temperature, pressure and relative humidity measuring device, transmission of measured data over internet and their presentation on a web site. First chapter introduces reader into principles of measuring air temperature, pressure and relative humidity and various types of sensors used for measuring . Next, the conception of designed system is described. Designed system must accomplish tasks from reading raw data from the sensor up to thein graphical presentation to the internet user. Second and third chapter describes hardware and software design of air temperature, pressure and relative humidity measuring unit. In next part one can find description of software used to transmit measured data over internet and software for generating web pages which are shown to users. The work is revieved in the final part of this thesis.
|
|
|
Specialized Computer System Automatic Control
Opálka, Jan ; Šátek, Václav (referee) ; Kunovský, Jiří (advisor)
This work deals with the automatic control of calculations of specialized system. The reader is acquainted with the numerical solution of differential equations by Taylor series method and numerical integrators. The practical aim of this work is to analyze parallel characteristics of Taylor series method, specification of parallel math operations and design of control of this operations.
|
|
|
IR thermometer
Petrucha, Martin ; Čech, Petr (referee) ; Rozman, Jiří (advisor)
This project is focusing to non-contact temperature measurement with using a knowledge about emmision in infrared spektrum using a battery powerred measurment device. The part of project is introdution of possibilities non-contact temperature measurement, introdusing with a basic types infrared sensors and subsequent design non-contact thermometer.
|
|
|
Radio Telemetry for RC Aircrafts
Žák, Tomáš ; Fuchs,, Michal (referee) ; Povalač, Aleš (advisor)
Master‘s thesis is focused on problematic about state of RC plane model during the flight. Device is able to measure overload, height, position, pressure and velocity of the flight and store this measurement data to memory medium. The main aim of the master‘s thesis was to design a functional board, firmware for device and design simple program for evaluating of measured data. Involvement consists of five basic parts. First part is microcontroller, which processes measurement data and communicate with others parts. Next is accelerometer. Accelerometer is used for scanning overload of the plane. Barometer is used for measurement of height and pressure. For measuring position and velocity is used GPS module. Last part is memory medium. MicroSD is used as memory medium for storing measurement data. Evaluation of measured data is realized as simple program with base graphical user interface. Program was created in Matlab.
|
guest ::
