|
|
The roof structure of the industrial hall in Kyjov
Nosková, Nela ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
The Bachelor´s thesis describes design and static assessment of the main roof structure supporting elements of the roof structure of the industrial hall in Kyjov. The hall is designed from timber. The aisle is rectangular floor plan 17,0 x 40,0 m. The main bearing structure causes as a frame truss supported by columns. Solid frame is made from solid timber C24. Purlin is designed from solid timber C24. The static calculation also includes fire resistance reports of single elements. Static analysis has been accomplished by student version of the SCIA Engineer 2012 software.
|
|
|
Beam bridge over a local road
Kunčarová, Edita ; Panáček, Josef (referee) ; Nečas, Radim (advisor)
The aim of this thesis is to design a one-span pre-stressed bridge structure over a local road. There are three possible versions of this particular construction designed as a part of this thesis, one of which was chosen for further design. The structure has been designed and calculated for the ultimate limit state as well as the service limit state. The calculations were made both by software and manually. Scia Engineer 19.1 has been used for software calculations and for the display of internal forces.
|
|
|
Storage hall
Osyková, Martina ; Šulák, Pavel (referee) ; Laníková, Ivana (advisor)
The master thesis ´´Storage hall” deals with designing of selected elements prefabrikated skeleton hall. Discussed elements are truss, beam, girder, column and prefabricate footing. Within above mentioned elements was carried out static analysis, design of reinforcement and reinforcement drawings. Analysis of internal forces for columns and prefabricate footing was carried out with usage of the program Scia Engineer, 3D model of the whole object was created. Analysis of internal forces for the rest of elements was carried out with help of manual calculation. Those elements were designed with consideration of ultimate limit state. Serviceability limit state assessment was carried out within the truss.
|
|
|
Concrete flat slab supported by columns
Turek, Jan ; Požár, Michal (referee) ; Perla, Jan (advisor)
This bachelor thesis deals with design of concrete flat slab of hospital building. The slab above the ground floor was designed. Internal forces were analysed with RFEM software based on finite entity method. Results were proved by the Direct Design Method and Equivalent Frame Method. The structural assessment was performed according to ultimate and serviceability limit states.
|
|
|
Highway box girder bridge
Ondrůšková, Kamila ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
The subject of the diploma thesis is the bridging design of the valley and Doľanský potok on the D1 motorway in the section Jánovce - Jablonov in Slovakia. Three variants of bridging have been designed and then compared. A post-tensioned construction of the box girder cross section was chosen as the most suitable variant, which was further checked. The static calculation was drawn up according to European standards.
|
|
|
Design of the floor structure in block of flats
Rejnart, Michal ; Chalabala, Jiří (referee) ; Klusáček, Ladislav (advisor)
This bachelor thesis deals with design of floor structure of residental building. Load-bearing structure is checked for the Ultimate Limit State and Service Limit State. This structure is designed like a two way slab on linear support. The report contains detailed description of structural system with used building materials. There are terms for technological process of designed structure in this section. The structural design report contains assessment process of designed structure and scored results.
|
|
|
Design of cable-stayed pedestrian bridge
Uher, Lukáš ; Kulhavý,, Tomáš (referee) ; Nečas, Radim (advisor)
This diploma thesis aims to design a structure of pedestrian bridge over the Svratka river. To make a preliminary study of possible bridging, three different outlines were drafted. The cable-stayed variant was selected for further analysis. Two towers, inclined in both their longitudinal and transverse direction, support a cast-in-place post-tensioned concrete deck through stay cables anchored in the tower and the deck. After determining the desired initial state, a finite element analysis was carried out using the Ansys software. The capacity of all main load-bearing elements was checked so it meets the ULS and SLS design criteria in accordance with EN 1992 codes.
|
|
|
Design of strengthening of the concrete structure from 1928
Bažantová, Lenka ; Pinkas, Karel (referee) ; Klusáček, Ladislav (advisor)
The bachelor’s thesis is focused on assessment of the existing construction four-storey building. The supporting system consists of cast-in-place concrete frame. The aim of this work is to assess the support structure for the expected loading of the resulting change in use of buildings for residential or commercial purposes. The subjects of assesment are columns, beams, girders and floor slab. In another part of work is suggested by reinforcement of non-conforming elements. The work includes the development of stroctural analysis and reinforcement drawings of reconstructed elements.
|
|
|
Design of Load Bearing Concrete Structure
Klodner, Jan ; Vácha, Jaroslav (referee) ; Štěpánek, Petr (advisor)
This thesis is focusing on general issues of floor concrete slabs, technology, implementation, subsoil models, calculation of internal forces and design approaches. Based on these data the thesis monitors the behaviour of floor slabs according to the various parameters. It also includes three versions of design of the real floor slab, made of steel fibre reinforced concrete, reinforced concrete and prestressed concrete. Economic comparison is also included. In addition it developes a design of the chalice base and reinforced concrete column of the supporting hall system, instead of the original usual base with steel column.
|
|
|
Bridge in Lipová Lázně village
Christ, Roman ; Bezručová, Kristína (referee) ; Panáček, Josef (advisor)
The subject of this bachelor thesis is the design of a perpendicular bridge structure across the Staříč River in the village of Lipová Lazne. The bridge translates communication II. class number 369, design category S7,5. Three design variants of the plate bridge are elaborated on a single field. The chosen variant is solved by means of an additional prestressed plate of a rectangular cross-section of height from 1000 mm to 920 mm in width and length of the supporting structure 20850 mm. The static model is solved as a simply supported plate with a bridging length of 18420 mm. The design was executed according to the standard ČSN-EN 1992-2. Calculation of load effects was performed using Scia Engineering 2019 software. Design and design assessments have been carried out according to the applicable regulations and norms.
|
guest ::
